Spelling suggestions: "subject:"MEMS device"" "subject:"MEMS crevice""
1 |
Dimesionality Aspects Of Nano Micro Integrated Metal Oxide Based Early Stage Leak Detection Room Temperature Hydrogen SensorDeshpande, Sameer Arun 01 January 2007 (has links)
Detection of explosive gas leaks such as hydrogen (H2) becomes key element in the wake of counter-terrorism threats, introduction of hydrogen powered vehicles and use of hydrogen as a fuel for space explorations. In recent years, a significant interest has developed on metal oxide nanostructured sensors for the detection of hydrogen gas. Gas sensors properties such as sensitivity, selectivity and response time can be enhanced by tailoring the size, the shape, the structure and the surface of the nanostructures. Sensor properties (sensitivity, selectivity and response time) are largely modulated by operating temperature of the device. Issues like instability of nanostructures at high temperature, risk of hydrogen explosion and high energy consumption are driving the research towards detection of hydrogen at low temperatures. At low temperatures adsorption of O2- species on the sensor surface instead of O- (since O- species reacts easily with hydrogen) result in need of higher activation energy for hydrogen and adsorbed species interaction. This makes hydrogen detection at room temperature a challenging task. Higher surface area to volume ratio (resulting higher reaction sites), enhanced electronic properties by varying size, shape and doping foreign impurities (by modulating space charge region) makes nanocrystalline materials ideal candidate for room temperature gas sensing applications. In the present work various morphologies of nanostructured tin oxide (SnO2) and indium (In) doped SnO2 and titanium oxide (titania, TiO2) were synthesized using sol-gel, hydrothermal, thermal evaporation techniques and successfully integrated with the micro-electromechanical devices H2 at ppm-level (as low as 100ppm) has been successfully detected at room temperature using the SnO2 nanoparticles, SnO2 (nanowires) and TiO2 (nanotubes) based MEMS sensors. While sensor based on indium doped tin oxide showed the highest sensitivity (S =Ra/Rg= 80000) and minimal response time (10sec.). Highly porous SnO2 nanoparticles thin film (synthesized using template assisted) showed response time of about 25 seconds and sensitivity 4. The one dimensional tin oxide nanostructures (nanowires) based sensor showed a sensitivity of 4 and response time of 20 sec. Effect of aspect ratio of the nanowires on diffusion of hydrogen molecules in the tin oxide nanowires, effect of catalyst adsorption on nanowire surface and corresponding effect on sensor properties has been studied in detail. Nanotubes of TiO2 prepared using hydrothermal synthesis showed a sensitivity 30 with response time as low as 20 seconds where as, TiO2 nanotubes synthesized using anodization showed poor sensitivity. The difference is mainly attributed to the issues related to integration of the anodized nanotubes with the MEMS devices. The effect of MEMS device architecture modulation, such as, finger spacing, number and length of fingers and electrode materials were studied. It has been found that faster sensor response (~ 10 sec) was observed for smaller finger spacing. A diffusion model is proposed for elucidating the effect of inter-electrode distance variation on conductance change of a nano-micro integrated hydrogen sensor for room temperature operation. Both theoretical and experimental results showed a faster response upon exposure to hydrogen when sensor electrode gap was smaller. Also, a linear increase in the sensor sensitivity from 500 to 80000 was observed on increasing the electrode spacing from 2 to 20 μm. The improvement in sensitivity is attributed to the higher reactive sites available for the gaseous species to react on the sensor surface. This phenomenon also correlated to surface adsorbed oxygen vacancies (O-) and the rate of change of surface adsorbed oxygen vacancies. This dissertation studied in detail dimensionality aspects of materials as well as device in detecting hydrogen at room temperature.
|
2 |
Lithium Niobate MEMS Device by Picosecond Laser MachiningHe, Yuan 10 1900 (has links)
<p> Lithium niobate has interesting characteristics such as the electro-optic effect, the acousto-optic effect, piezoelectricity and large nonlinear optical coefficients. Potential applications in MEMS field could be explored if microstructures are fabricated in lithium niobate substrates,. This thesis presents the fabrication and characterization of a lithium niobate MEMS device. As lithium niobate crystal is difficult to process using standard semiconductor techniques including both wet etching and dry etching, new methods are
required to process lithium niobate. In our project, picosecond laser pulses were chosen to
produce bridges on lithium niobate. Fabrication of grooves with high aspect ratio were attempted and grooves with clean morphology were obtained when laser pulses with low cutting speed, medium pulse energy, and large number of passes were employed. This shows picosecond laser machining is a viable method to process lithium niobate.</p> <p> Waveguides in Z cut lithium niobate crystal were fabricated using Ti-indiffusion techniques. After the fabrication of waveguides in lithium niobate, a SiO2 film with a thickness of 0.3μm was deposited as a buffer layer. Ti-Pt-Au electrodes for actuation function were then deposited through lift-off technique. Finally a bridge structure (80um in width and 600um in length) with a waveguide embedded in it was fabricated with picosecond laser. The insertion loss before and after laser machining was 6.99dB and 5.01dB respectively.</p> <p> Optical and electrical tests were performed in an effort to determine the resonance frequency of bridge. In the optical test, many bulk piezoelectric resonance peaks were presented in the frequency spectrum. After damping the vibration of substrate, these spikes disappeared and only a background noise with small spikes were obtained. As those small spikes are not reproducible, the optical test is not a viable method to determine resonance frequency of the bridge structure in our device. The electrical test was then carried out in a vacuum environment in order to find the resonance frequency. The spectrum presents a spike with large amplitude. However, the phase and amplitude of the spike remained the same when the vacuum condition was removed, which indicates the spike is not related to the resonance of the bridge. In summary, the resonance frequency of bridge structure could not be determined by these two approaches.</p> <p> Future work could involve directly investigating the material properties surrounding the machining region to see whether the piezoelectricity of the material has been damaged from laser ablation process. New laser machining process of lithium niobate may also need to be studied to avoid this damage to the substrate structure. Even though our device could not be driven to vibrate at its resonance frequency, it is worth making microstructures in lithium niobate substrates. The combination of optical, mechanical and electrical elements will make lithium niobate a great potential material for optical MEMS
applications.</p> / Thesis / Master of Applied Science (MASc)
|
3 |
Analysis Of Squeeze Film Damping In MicrodevicesPandey, Ashok Kumar 11 1900 (has links) (PDF)
There are various energy dissipation mechanisms that affect the dynamic response of microstructures used in MEMS devices. A cumulative effect of such losses is captured by an important characteristic of the structure called Quality factor or Q-factor. Estimating Q-factor at the design stage is crucial in all applications that use dynamics as their principle mode of operation. A high Q-factor indicates sharp resonance that, in turn, can indicate a broad flat response region of the structure. In addition, a high Q-factor typically indicates a high sensitivity. Microstructures used in MEMS are generally required to have much higher Q-factors than their macro counterparts. However some damping mechanisms present in microstructures can reduce the Q-factor of the structure significantly. In the present work, we investigate the dependence of Q-factor on the squeeze film damping an energy dissipation mechanism that dominates by a couple of orders of magnitude over other losses when a fluid (e.g., air) is squeezed through gaps due to vibrations of a microstructure. In particular, we show the effect of nonlinear terms in the analysis of squeeze film damping on the Q-factor of a structure. We also show the effect of rarefaction, surface roughness along with their coupled effect and with different boundary conditions such as open border effect, blocked boundary effect on the squeeze film damping. Finally, we develop similitude laws for calculating squeeze film damping force in up-scaled structures. We illustrate the effects by studying various type of microstructures including parallel plates, beams, plate and beam assemblies such as MEMS microphone, vibratory gyroscope etc. We view the contributions of this work as a significant in investigating and integrating all important effects altogether on the squeeze film damping, which is a significant factor in the design and analysis of MEMS devices.
|
4 |
Study Of Squeeze Film Effects In Modelling Dynamic MEMS DevicesMohite, Suhas 09 1900 (has links)
We present studies on squeeze film effects in dynamic MEMS devices with a special emphasis on the development of compact analytical models.
First, the efficacy of lumped parameter modelling of dynamic MEMS devices is illustrated in MATLAB/SIMULINK software environment using a MEMS gyroscope and a MEMS microphone as examples. This is followed by a comparative study of equivalent electrical circuit models for a MEMS microphone wherein the importance of accurate extraction of lumped mass, stiffness and damping is brought into focus. In this context, a need for an in depth study of squeeze film behaviour in MEMS structures is highlighted and a strong motivation is drawn for the development of compact squeeze film models.
A 2D analytical model for estimating squeeze film damping and spring force in perforated MEMS structures is presented. The governing equations based on isothermal compressible Reynolds equation are derived by considering an approximate circular pressure cell around a hole which is representative of the spatially invariant pressure pattern over the interior of the flow domain. The advantages and limitations of the solution are discussed with relevance to MEMS structures.
Next, a comprehensive analytical model for 3D MEMS structures that includes effects of compressibility, inertia, and rarefaction in the flow between two parallel plates forming the squeeze region as well as the flow through perforations is developed. A modified Reynolds equation that includes the unsteady inertial term is derived from the Navier-Stokes equation to model the flow in the circular cell and the losses through the holes are modelled using Poiseuille flow. Rarefaction effects in the flow through the air-gap as well as the holes are accounted for by considering the slip boundary conditions. The analytical results are compared with extensive numerical simulations carried out using full 3-D Navier-Stokes equation solver in a commercial simulation package (ANSYS-CFX). We show that the analytical solution performs very well in tracking the net force
up to the first resonant frequency of the entrapped air.
|
5 |
Thermal and Mechanical Behavior of Nano-structured MaterialsChen, Guodong 22 May 2012 (has links)
No description available.
|
6 |
Effect Of Squeeze Film Flow On Dynamic Response Of MEMS Structures With Restrictive Flow Boundary ConditionsShishir Kumar, * 06 1900 (has links) (PDF)
There are many ways in which the surrounding media, such as air between an oscillating MEMS structure and a fixed substrate, can affect the dynamic response of a MEMS transducer. Some of these effects involve dissipation while others involve energy transfer. Transverse oscillations of a planar structure can cause a lateral air flow in small gaps that results in pressure gradients. The forces due to the built–up pressure are always against the vibration of the structure and have characteristics of damper and stiffener. In this work, we study the squeeze film phenomenon due to the interaction between the air–film and the structure in the presence of restrictive flow boundary conditions. It is known that the squeeze film damping due to the air trapped between the oscillating MEMS structure and the fixed substrate often contributes to maximum energy dissipation. We carry out an analysis to estimate damping and stiffness in cases with restrictive flow boundaries in dynamic MEMS devices. While the studies reported in the present work address fluid flow damping with restrictive flow boundaries, the analysis of air-flow shows another important phenomenon of enhanced air-spring stiffness. This study is discussed separately in the context of spring stiffening behavior in MEMS devices exhibiting squeeze film phenomenon.
First a theoretical framework for modeling squeeze film flow is established and this is followed with analytical and numerical solutions of problems involving squeeze film phenomenon. Modeling of squeeze film effects under different flow conditions is carried out using Reynold’s equation. The problem of squeeze film damping in MEMS transducers
is more involved due to the complexities arising from different boundary conditions of the fluid flow. In particular, we focus our attention on estimation of damping in restricted flow boundaries such as only one side vented and no side vented passive boundary conditions. Damping coefficient for these cases are extracted when the fluid is subjected to an input velocity profile according to a specific mode shape at a given frequency of oscillation. We also explain the squeeze film flow in restricted boundaries by introducing the concept of passive and active boundary conditions and analyzing the pressure gradients which are related to the compressibility of the air in the cavity. Passive boundary conditions is imposed by specifying the free flow or no flow along one of the edges of the cavity, whereas, active boundary condition is imposed by the velocity profile being specified at the interface of the cavity with the oscillating structure.
Some micromechanical structures, such as pressure sensors and ultrasound transducers use fully restricted or closed boundaries where the damping for such cases, even if small, is very important for the determination of the Q–factor of these devices. Our goal here is to understand damping due to flow in such constrained spaces. Using computational fluid dynamics (ANSYS–FLOTRAN), the case of fully restricted boundaries is studied in detail to study the effect of important parameters which determines the fluid damping, such as flow length of the cavity, air–gap height, frequency of oscillations and the operating pressure in the cavity. A simulation strategy is developed using macros programming which overcomes some of the limitations of the existing techniques and proves useful in imposing a non–uniform velocity and the extraction of damping coefficient corresponding to the flexibility of the structure in specific oscillation modes. Rarefaction effects are also accounted for in the FEM model by introducing the flow rate coefficient, or, alternatively using the concept of effective viscosity. The analysis carried out for the fully restricted case is motivated by the analytical modeling of squeeze film phenomenon for a wide range of different restricted boundaries, and analyzing the resulting pressure gradient patterns. We show that significant damping exists even in fully restricted boundaries due to lateral viscous flow. This is contrary to known reported results, which neglect damping in such cases. The result indicates that in fully restrictive fluid flow boundaries or in a closed cavity, air damping cannot be neglected at lower oscillation frequencies and large flow length to air-gap ratio if the active boundary has a non-uniform velocity profile.
Analysis of air-flow in the case of restricted flow boundaries shows another important phenomenon of enhanced air-spring stiffness. It is found that fluid film stiffness has a nonlinear dependence on various parameters such as air-gap to length ratio, fluid flow boundary conditions and the frequency of oscillation. We carry out analysis to obtain the dynamic response of MEMS devices where it is significantly affected by the frequency dependent stiffness component of the squeeze film. We show these effects by introducing frequency dependent stiffness in the equation of motion, and taking examples of fluid boundary conditions with varying restriction on flow conditions. The stiffness interaction between the fluid and the structure is shown to depend critically on stiffness ratios, and the cut-off frequency. It is also inferred that for a given air–gap to flow length ratio, the spring behaviour of the air is independent of the flow boundary conditions at very high oscillation frequencies. Hence, we limit our focus on studying the effect of fluid stiffness in the regime where it is not fully compressible. For non-resonant devices, this study finds its utility in tuning the operating frequency range while for resonant devices it can be useful to predict the exact response. We show that it is possible to design or tune the operating frequency range or shift the resonance of the system by appropriate selection of the fluid flow boundary conditions.
The emphasis of the present work has been toward studying the effect of squeeze film flow on dynamic response of MEMS structures with restrictive flow boundary conditions. Estimation of energy dissipation due to viscous flow cannot be ignored in the design of MEMS which comprise of restricted flow boundaries. We also remark that modeling of a system with squeeze film flow of the trapped air in terms of frequency independent parameters, viz. damping and stiffness coefficient, is unlikely to be very accurate and may be of limited utility in specific cases. Although the central interest in studying squeeze film phenomenon is on the damping characteristics because of their direct bearing on energy dissipation or Q–factor of a MEMS device, the elastic behaviour of the film also deserves attention while considering restrictive flow boundary conditions.
|
Page generated in 0.0199 seconds