Objetivos de la Tesis:El objetivo principal de la presente Tesis, Cinética de Tintura de Tencel ,se centra en dos objetivos parciales: la sensibilidad a la temperatura y el efecto de la variación de la concentración de electrolito en la misma.La evaluación cinética del sistema fibra-colorante, se ha realizado mediante la evolución de la expresión Ct/Cinf, relación entre colorante absorbido por la fibra en un tiempo t y la concentración del mismo en el equilibrio, en función de los distintos parámetros estudiados a través del análisis de varios modelos.Metodología empleadaLa aproximación a dicha evaluación puede realizarse mediante: Modelos cinéticos semi-empíricos y Modelos matemáticos provenientes de la segunda ley de Fick. En los primeros, es la constante cinética k el parámetro definitorio del proceso, mientras que, en los modelos matemáticos es el adimensional Dt/r2. Ambos enfoques describen la evolución del mismo fenómeno y, por lo que debería existir algún tipo de relación entre k y Dt/r2. El estudio del proceso desde ambos puntos de vista y, cuando sea posible, establecer la relación mencionada, es otro de los objetivos de la Tesis. Con ello, se podrá comparar la incidencia estructural del sustrato respecto al comportamiento cinético.Fases del trabajoSiendo Tencel una fibra celulósica, se ha realizado un análisis comparativo con Viscosa , mediante un estudio experimental en celda de tintura en flujo continuo con medición espectrofotométrica on line . Las condiciones experimentales escogidas han sido: Temperaturas de 30, 40, 50, 60, 70 y 80ºC y [NaCl] de 0.5, 1.0 y 1.5 g/L, valorando la cantidad de colorante que la fibra absorbe, en función del tiempo. Conclusiones y valoración de los resultados obtenidosLa comparación de D/r2 entre ambas fibras indica que:Exceptuando el modelo de Chrastil, los valores de D/r2 obtenidos, disminuyen con el aumento de la concentración de electrolito .Los valores obtenidos a partir de la aproximación de Crank y de la de Rais-Militky presentan gran similitud. Hay un estrecho paralelismo entre los valores obtenidos a partir de la ecuación de Cegarra-Puente-Valldeperas y los de las aproximaciones matemáticas de Crank y Rais-Militky. Para algunos modelos matemáticos, a la concentración máxima de electrolito, los valores de D/r2 son muy similares en Viscosa y prácticamente coincidentes en Tencel. El orden de magnitud de los Dap para Tencel pueden apreciarse en la Tabla siguiente.Dap (cm2/s) Modelo10-11-10-14 Cegarra-Puente-Valleperas10-12-10-14 Chrastil10-11-10-16 Urbanik10-11-10-14 Crank10-11-10-14 Rais-Militky10-13-10-16 KilbyA pesar de las diferencias según la ecuación considerada, existe en Tencel una variación del Dap en función de los tres niveles de agotamiento en los que se ha estructurado el estudio cinético.A través de la cinética de tintura se ha podido demostrar la existencia de varias capas de distinto nivel de ordenación microestructural que implicará, la necesidad de reconsiderar los procesos de tintura a fin de obtener unos niveles de penetración del colorante en la fibra similares a los de otras fibras celulósicas, al existir en Tencel velocidades de difusión diferenciadas en sus distintas capas.

Particles and macromolecular components, including biopolymers (protein and carbohydrate), are viewed as the main foulants in the complex feed submerged membrane filtration systems such as membrane bioreactor (MBR). This work focused on two aspects of fouling in complex fluids: 1- Assessing fouling propensity and mechanisms for various model solutions. 2- Using of two specific solutions modelling biomass found in MBR for a better understanding of the fouling mechanisms in submerged MBR processes. Filtrations were carried out with 0.22 ??m PVDF hollow fibre membrane. Alginate was used as a model for polysaccharide, bovine serum albumin (BSA) as a model for protein, (un)washed yeast and bentonite were representing suspended solid contents. According to the data obtained during this study the fouling propensity of each model solution was classified as follow in a decreasing order: Alginate &gt unwashed yeast &gt washed yeast &gt BSA &gt bentonite for one-component solutions; and Alginate-washed yeast &gt Alginate-BSA &gt Alginate-bentonite &gt Alginate-unwashed yeast for two-component solutions. Introducing the alginate increased the reversible fouling (except BSA). Passive adsorption had a significant effect on fouling of alginate even before the beginning of the filtration. Washed yeast and a mixture of washed yeast + BSA were then used as model solutions to simulate the activated sludge found in MBR. The concentration of washed yeast and BSA used in this study were calculated in order for the characterisations of the two model solution to match (in terms of biopolymer contents) those of MBR biomasses reported in the literature. By rinsing, backwashing and chemical cleaning of the membrane, three fouling layers of upper, intermediate and lower were defined respectively. Results obtained from the analysis of the biopolymers found in the cleaning solutions allow a better understanding of the fouling mechanisms occurring for the two model solutions used in this study: for washed yeast, the lower layer and for washed yeast + BSA , the upper and intermediate layers were found to have relatively high biopolymeric composition. This was explained by higher concentration of solids on the membrane surface and by higher biopolymer interactions when washed yeast was mixed with BSA.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.

In this thesis, the effects of simple shear flow on macromolecular structure and interactions are investigated in detail via a combination of Nuclear Magnetic Resonance (NMR) spectroscopy and rheology, namely Rheo-NMR. A specially designed NMR couette shear cell and benchtop shear cell, developed in-house, demonstrated that the direct measurement of the above phenomena is possible. First, to determine whether the shear cells were creating simple shear flow, results were reproduced from literature studies of liquid crystal systems which report shear effects on: Cetyl Trimethyl Ammonium Bromide (CTAB) in deuterium oxide, and Poly(gamma-benzyl-L-glutamate) (PBLG) in m-cresol. Next, the possible conformational changes to protein structure brought about by shear were investigated by applying shear to Bovine -lactogobulin ( -Lg). As the protein was sheared, a small, irreversible conformational change was observed by means of one-dimensional and two-dimensional 1H NMR with reasonable reproducibility. However, no observable change was detected by means of light scattering. A large conformational change was observed after shearing a destabilized -Lg sample containing 10% Trifluoroethanol (TFE) (v/v). From an NMR point of view, the sheared state was similar to the structure of -Lg containing large amounts of -helices and, interestingly, similar to the structure of -Lg containing -sheet amyloid fibrils. Gel electrophoresis tests suggested that the changes were caused by hydrophobic interactions. Unfortunately, this proved to be difficult to reproduce. The effect of shear on an inter-macromolecular interaction was investigated by applying shear during an enzyme reaction of pectin methylesterase (PME) on pectin. Experimental method and analysis developments are described in detail. It was observed that under the conditions studied, shear does not interfere with the de-esterification of pectin with two types of PME, which have different action mechanisms at average shear rates up to 1570 s-1.