Flow meters are used to measure flow accurately. There are many different flow meters and it is necessary to know which will function best for specific situations. A wide variety of flow meters were selected for the study to assist in showing that each flow meter has its tradeoffs. The selected meters include: three types of Venturi meters, a wedge meter, a V-cone meter, an electromagnetic flow meter, and an ultrasonic flow meter. The characteristics researched in this study are discharge coefficient (Cd) over a range of Reynolds numbers (Re), head loss across each flow meter, life, and cost of meter. Each meter was tested over a wide range of Re to find the corresponding Cd and head loss. The life and cost of each meter were researched and estimated based on the flow meter companies and local distributor’s findings. With the findings, the tradeoffs are illustrated and will assist buyers in selecting a flow meter that will best fit their needs. While there are more flow meters available than was tested, the current study can direct buyers in a correct process of selecting meters for all situations.

This thesis investigates the possibility of using magnetic flow meters to measure the flowrate of molten salts in Seaborg Technologies Compact Molten Salt Reactor (CMSR).There is a need to accurately measure the flow rate in salt circulation systems to ensureproper operation of the entire facility. The requirements and criteria for the operationof a magnetic flow meter are studied, from which a model is constructed in COMSOLMultiphysics. The flow meter characteristics are analysed in COMSOL by performingsteady-state magnetohydrodynamic (MHD) simulations and by doing a sensitivity anal-ysis of the velocity field and the magnetic field strength. The induced electric potentialdifference in the flow meter when the reactor is at a maximum designed thermal power isin the range of 65 mV when using a normal inlet flow profile. The effect of the velocityfield is studied for two velocity profiles, and it indicates that the velocity profile alters theinduced potential difference even though the mass flowrate is the same. The magneticfield strength increases the electric potential difference when it is increasing, which isaccording to theory. The results indicate that magnetic flow meters are a viable optionfor Seaborg’s CMSR. However, further analysis is needed regarding the materials usedto ensure proper operation of the flow meter.