Spelling suggestions: "subject:"marked graphs"" "subject:"barked graphs""
1 |
Automated Mapping of Clocked Logic to Quasi-Delay Insensitive CircuitsShivakumaraiah, Lokesh 05 May 2007 (has links)
The use of computer aided design (CAD) tools has catalyzed the growth of IC design techniques. The rapid growth in transistor count for synchronous digital circuits has increased circuit complexity. This growing complexity of synchronous circuits has exposed design issues such as clock skew, increased power consumption, increased electromagnetic interference and worst case performance. The increasing number of challenges posed by synchronous designs has encouraged researchers to explore asynchronous design techniques as an alternative methodology. Asynchronous circuits do not use a global clock signal that is the primary cause of many design challenges faced by synchronous designers. It has also been shown in some designs that asynchronous circuits consumes less power, and exhibits better average case performance than synchronous circuits. Asynchronous design techniques, even with their various advantages over synchronous systems, are not widely accepted by logic designers. This is due to the shortcomings of asynchronous design methodologies, primarily, the limited availability of CAD tool support and the use of proprietary specification languages. To overcome the shortcomings of current asynchronous design techniques, this research uses a methodology for designing asynchronous circuits starting from clocked RTL design. This research extends the concepts of Phased Logic (PL) and marked graphs to quasi-delay insensitive gates (QDI) gates to create an asynchronous PL-QDI methodology. The PL methodology is easy to use as it maps conventional RTL designs into delay insensitive PL circuits using commercial CAD tools. Caltech?s QDI gates exhibit fast forward latency, but the use of Caltech?s methodology requires a user skilled in the pecurialities of the Caltech design methodology. This research uses best of Caltech?s QDI circuit methodology and the PL methodology to come up with a new asynchronous PL-QDI methodology. It also presents a synthesis algorithm that uses commercially available synchronous CAD tools to map clocked designs to PL-QDI systems. Results of this research show that third-party clocked RTL codes including intellectual property (IP) cores can be converted to asynchronous PL-QDI systems using the PL-QDI CAD tools presented in this research. This work shows how mature synchronous CAD tools can be used to design clockless circuits.
|
2 |
A hierarchical control system for scheduling and supervising flexible manufacturing cellsFahmy, Sherif 23 April 2009 (has links)
A hierarchical control system is proposed for automated flexible manufacturing cells (FMC) that operate in a job shop flow setting. The control system is made up of a higher level scheduler/reactive scheduler, which optimizes the production flow within the cell, and a lower level supervisor that implements the decisions of the scheduler on the shop floor. Previous studies have regularly considered the production scheduling and the supervisory control as two separate problems. This has led to: i) deadlock-prone optimized schedules that cannot be implemented in an automated setting, ii) deadlock-free optimized schedules that lack the means to be transformed into shop floor supervisors, or iii) supervisors that can safely drive the system with no consideration for production performance. The proposed control system combines mathematical models and an insertion heuristic to solve the deadlock-free scheduling problem in job shops, a deadlock-free reactive scheduling heuristic that can revise the schedules upon the occurrence of a wide variety of disruptions, and a systematic procedure that can transform schedules into readily implementable Petri net (PN) supervisors. The integration of these modules into one control hierarchy guarantees a correct, optimized and agile behavior of the controlled system.
The performances of the mathematical models, the scheduling and the reactive scheduling heuristics were evaluated by comparison to performances of previous approaches. Experimental results showed that the proposed modules performed consistently better than the other corresponding approaches. The supervisor realization procedure and the overall control architecture were validated by simulation and implementation in an experimental robotic FMC. The control system developed was capable of driving the experimental cell to satisfactorily complete the processing of different product mixes that featured complex processing routes through the cell.
|
3 |
A hierarchical control system for scheduling and supervising flexible manufacturing cellsFahmy, Sherif 23 April 2009 (has links)
A hierarchical control system is proposed for automated flexible manufacturing cells (FMC) that operate in a job shop flow setting. The control system is made up of a higher level scheduler/reactive scheduler, which optimizes the production flow within the cell, and a lower level supervisor that implements the decisions of the scheduler on the shop floor. Previous studies have regularly considered the production scheduling and the supervisory control as two separate problems. This has led to: i) deadlock-prone optimized schedules that cannot be implemented in an automated setting, ii) deadlock-free optimized schedules that lack the means to be transformed into shop floor supervisors, or iii) supervisors that can safely drive the system with no consideration for production performance. The proposed control system combines mathematical models and an insertion heuristic to solve the deadlock-free scheduling problem in job shops, a deadlock-free reactive scheduling heuristic that can revise the schedules upon the occurrence of a wide variety of disruptions, and a systematic procedure that can transform schedules into readily implementable Petri net (PN) supervisors. The integration of these modules into one control hierarchy guarantees a correct, optimized and agile behavior of the controlled system.
The performances of the mathematical models, the scheduling and the reactive scheduling heuristics were evaluated by comparison to performances of previous approaches. Experimental results showed that the proposed modules performed consistently better than the other corresponding approaches. The supervisor realization procedure and the overall control architecture were validated by simulation and implementation in an experimental robotic FMC. The control system developed was capable of driving the experimental cell to satisfactorily complete the processing of different product mixes that featured complex processing routes through the cell.
|
Page generated in 0.0494 seconds