Spelling suggestions: "subject:"matematerials, mechanical properties"" "subject:"datenmaterials, mechanical properties""
11 |
Constitutive behavior and reliability of actuator materialsDavis, Brandon Witt 08 1900 (has links)
No description available.
|
12 |
Open-celled microcellular themoplastic foamRodeheaver, Bret Alan 08 1900 (has links)
No description available.
|
13 |
Mixing cohesionless materialsCooke, Michael H. January 1976 (has links)
When solid particles of different types are mixed together, a random distribution of the components is rarely produced and deterioration of the mixture can occur on subsequent handling. Among the microscopic processes responsible, one important mechanism for free-flowing materials is thought to be interparticle percolation, the drainage of particles through the interstices between larger ones. If the larger particles are stationary this is called spontaneous percolation, whereas if it is produced by shear strain the term strain-induced percolation is used. Here a quantitative evaluation of both and some consequences are described. A practical application of spontaneous percolation has been the design and construction of a new static mixer or distributor, consisting of rows of angle bars mounted horizontally in a vertical channel. Material fed to the top of a unit bounces off the bars and is distributed across the channel. Two mixers were built; one dispersed material in one lateral direction only and could be used for feeding material onto a belt or distributing seed from a moving vehicle. The other produced a two-dimensional dispersion and would be useful in distributing material flowing into hoppers or whenever a good mixture were required. Optimisation of the design was investigated using a computer program which simulated the motion of a spherical particle as it fell through such a mixer. Design data was deduced from the record of the position of the particle. The mixers were not suitable for use with fine materials. Interpretation of experimental results from this equipment requires suitable statistical indices and two were developed here. One related the variance of sample compositions to the number of particles fed to the mixer by assuming that the distributions of material were ordered. The second, using the correlation coefficient between samples, related the variance to the sample size in those situations where two orthogonal processes are in operation. Both techniques are generally applicable to fields other than that of powder mixing. On the theoretical side, an existing model of spontaneous percolation for inelastic materials has been extended and improved. The original form did not account for the motion of a particle between collisions with bulk particles but this has now been included. An entirely new semi-empirical model for partly elastic materials has also been proposed. Both predict percolation velocities which agree with experimental data. In order to extend earlier experimental studies on strain-induced percolation, a simple shear cell was modified by installing a hydraulic drive which enabled the cell to be driven at a constant speed. Advantages of the use of such a cell include the possibility of detecting a percolating particle on entry to and exit from the bed and the constant strain throughout the material. Reliable and accurate readings of residence times of percolating particles were recorded and percolation velocities and both lateral and axial diffusion coefficients were calculated. These were functions of the relative particle size and density, the material properties of the percolating particle and bed conditions such as strain rate and normal stress Denser and softer particles percolated faster. Decreasing the diameter ratio between percolating and bulk particles from 0.67 to 0.27 caused a twenty-five fold increase in the percolation rate. The dependence of this rate on particle diameter was interpreted using statistical mechanics. The percolation rate has been shown to reach a constant value as the strain rate increases, in contrast to the deductions drawn in earlier work by Scott, whose procedure has been proved to be unsound.
|
14 |
Structural Testing and Analysis of Hybrrid Composite/Metal Joints for High-Speed Marine StructuresKabche, Jean Paul January 2006 (has links) (PDF)
No description available.
|
15 |
Laser bending of commercially pure grade 2 titanium alloy plates: mechanisms analysis and characterisation of mechanical propertiesMjali, Kadephi Vuyolwethu January 2014 (has links)
The processing of materials has become a specialist field and the industry will continue to grow due to rising costs in labour and raw materials which has forced many automotive industry suppliers to invest heavily in this field. In order to be relevant and competitive in today’s industrial world, companies in South Africa are now forced to dedicate billions of rands in profits to research and development. Metals like titanium are finding favour with automotive and aviation companies in pursuit of savings in fuel consumption. This saving is achieved by reducing weight on aircraft and automobiles yet still meeting acceptable and improved structural integrity. In-depth research into the behaviour of various materials under varying loading conditions is therefore essential. The study on the processing of commercially pure grade 2 titanium alloy plates focuses on the development of process parameters for bending the material using a 4kW Nd: YAG laser to an approximate radius of curvature of 120mm. The resulting mechanical properties of laser formed plates are then compared to those obtained from mechanically formed samples. The titanium parent material was used to benchmark the performance of formed samples. The effect of process parameters on the mechanical properties and structural integrity also formed part of this study. To obtain the bending parameters for laser forming, various combinations of processing speeds and laser powers were used. The line energy is dependent on the power and scanning velocity parameters and these are shown in table 1. The laser power, line energy and scanning velocity were the main parameters controlled in this study and the beam diameter remained unchanged. Residual stress analysis, micro-hardness and fatigue life testing were carried out to analyse mechanical properties and the structural integrity of the plate samples. Microstructural analysis was also done to observe changes in the material as a result of the forming processes. From the results it is evident that laser forming is beneficial to the hardness of titanium but detrimental to the fatigue life at higher line energies. Residual stress analysis showed the amount of stress within the study samples increased with each forming operation. This information was vital in the analysis of the fatigue life of titanium. A fatigue life prediction model was developed from this study and it shed some light on the behaviour of titanium in fatigue testing. The model could be used to predict fatigue life when no fatigue data is available for commercially pure grade 2 titanium alloy plates. In conclusion, this study helped establish parameters that could be used to bend titanium while the analysis of mechanical properties showed the limits of working with this alloy.
|
16 |
Mechanisms, analysis and characterisation of mechanical properties of laser formed commercially pure grade 2 titanium alloy platesMjali, Kadephi Vuyolwethu January 2014 (has links)
The processing of materials has become a specialist field and the industry will continue to grow due to rising costs in labour and raw materials which has forced many automotive industry suppliers to invest heavily in this field. In order to be relevant and competitive in today’s industrial world, companies in South Africa are now forced to dedicate billions of rands in profits to research and development. Metals like titanium are finding favour with automotive and aviation companies in pursuit of savings in fuel consumption. This saving is achieved by reducing weight on aircraft and automobiles yet still meeting acceptable and improved structural integrity. In-depth research into the behaviour of various materials under varying loading conditions is therefore essential. The study on the processing of commercially pure grade 2 titanium alloy plates focuses on the development of process parameters for bending the material using a 4kW Nd: YAG laser to an approximate radius of curvature of 120mm. The resulting mechanical properties of laser formed plates are then compared to those obtained from mechanically formed samples. The titanium parent material was used to benchmark the performance of formed samples. The effect of process parameters on the mechanical properties and structural integrity also formed part of this study. To obtain the bending parameters for laser forming, various combinations of processing speeds and laser powers were used. The line energy is dependent on the power and scanning velocity parameters and these are shown in table 1. The laser power, line energy and scanning velocity were the main parameters controlled in this study and the beam diameter remained unchanged. Residual stress analysis, micro-hardness and fatigue life testing were carried out to analyse mechanical properties and the structural integrity of the plate samples. Microstructural analysis was also done to observe changes in the material as a result of the forming processes. From the results it is evident that laser forming is beneficial to the hardness of titanium but detrimental to the fatigue life at higher line energies. Residual stress analysis showed the amount of stress within the study samples increased with each forming operation. This information was vital in the analysis of the fatigue life of titanium. A fatigue life prediction model was developed from this study and it shed some light on the behaviour of titanium in fatigue testing. The model could be used to predict fatigue life when no fatigue data is available for commercially pure grade 2 titanium alloy plates. In conclusion, this study helped establish parameters that could be used to bend titanium while the analysis of mechanical properties showed the limits of working with this alloy.
|
17 |
Improving the Mechanical Properties of Nano-HydroxyapatiteUnknown Date (has links)
Hydroxyapatite (HAp) is an ideal bioactive material that is used in orthopedics.
Chemical composition and crystal structure properties of HAp are similar to the natural
bone hence it promotes bone growth. However, its mechanical properties of synthetic
HAp are not sufficient for major load-bearing bone replacement.
The potential of improving the mechanical properties of synthetic hydroxyapatite
(HAp) by incorporating carboxyl functionalized single walled carbon nanotubes
(CfSWCNT) and polymerized ɛ-caprolactam (nylon) is studied. The fracture toughness,
tensile strength, Young’s modulus, stiffness and fracture energy were studied for a series
of HAp samples with CfSWCNT concentrations varying from 0 to 1.5 wt. % without, and
with nylon addition. X-ray diffraction (XRD), Scanning Electron Microscopy (SEM),
Transmission Electron Microscopy (TEM) and Differential Scanning Calorimetry (DSC)
were used to characterize the samples. The fracture toughness and tensile test was
performed under the standard protocol of ASTM D5045 and ASTM D638-02a respectively. Reproducible maximum values of (3.60 ± 0.3) MPa.m1/2 for fracture
toughness and 65.38 MPa for tensile strength were measured for samples containing 1 wt.
% CfSWCNT and nylon. The Young’s modulus, stiffness and fracture energy of the
samples are 10.65 GPa, 1482.12 N/mm, and 644 J/m2 respectively. These values are
comparable to those of the cortical bone. Further increase of the CfSWCNT content
results to a decreased fracture toughness and tensile strength and formation of a
secondary phase. / Includes bibliography. / Dissertation (Ph.D.)--Florida Atlantic University, 2016. / FAU Electronic Theses and Dissertations Collection
|
18 |
Analysis and design optimization of laminated composite structures using symbolic computation.Summers, Evan. January 1994 (has links)
The present study involves the analysis and design optimization of thin and thick laminated composite structures using symbolic computation. The fibre angle and wall thickness of balanced and unbalanced thin composite pressure vessels are optimized subject to a strength criterion in order to maximise internal pressure or minimise weight, and the effects of axial and torsional forces on the optimum design are investigated. Special purpose symbolic computation routines are developed in the C programming language for the transformation of coordinate axes, failure analysis and the calculation of design sensitivities. In the study of thin-walled laminated structures, the
analytical expression for the thickness of a laminate under in-plane loading and its sensitivity with respect to the fibre orientation are determined in terms of the fibre orientation using symbolic computation. In the design optimization of thin composite pressure vessels, the computational efficiency of the optimization algorithm is improved via symbolic computation. A new higher-order theory which includes the effects of transverse shear and normal deformation is developed for the analysis of laminated composite plates and shells with transversely isotropic layers. The Mathematica symbolic computation package is employed for obtaining analytical and numerical results on the basis of the higher-order theory. It is observed that these numerical results are in excellent agreement with exact three-dimensional elasticity solutions. The computational efficiency of optimization algorithms is important and therefore special purpose symbolic computation routines are developed in the C programming language for the design optimization of thick laminated structures based on the higher-order theory. Three optimal design problems for thick laminated sandwich plates are considered, namely, the minimum weight, minimum deflection and minimum stress design. In the minimum weight problem, the core thickness and the fibre content of the surface layers are optimally determined by using equations of micromechanics to express the elastic constants. In the minimum deflection problem, the thicknesses of the surface layers are chosen as the design variables. In the minimum stress problem, the relative thicknesses of the layers are computed such that the maximum normal stress will be minimized. It is shown that this design analysis cannot be performed using a classical or shear-deformable theory for the thick panels under consideration due to the substantial effect of normal deformation on the design variables. / Thesis (Ph.D.)-University of Natal, Durban, 1994.
|
19 |
Processing of bulk hierarchical metal-metal compositesKelly, Aoife January 2011 (has links)
Spray forming with eo-injection of a solid particulate phase to form a metal-metal composite has been studied as a new route for manufacture. Two Al-based matrices were investigated: AI-12Si for testing the feasibility of the new manufacturing route and Al-4Cu for providing better mechanical performance. For both composite types, Ti was chosen as the particulate phase and the processing-microstructure-property relationships then studied. At Peak Werkstoff GmbH, Germany 12 wt%Ti particles were eo-injected into an atomised Al alloy droplet spray and eo-deposited to form a rv300 kg billet. The microstructure comprised refined equiaxed a-AI grains (rv5fLm), spherical Si particles (rv5fLm) and uniformly distributed Ti particles (rv80fLm). Sections of the billet were extruded under a range of conditions into long strips 20mm wide and 6mm, 2.5mm and 1mm thickness. At high strains, the Ti particles were deformed into continuous fibres of a few microns in thickness. Accumulative roll bonding was then performed to higher total strains, while maintaining a constant cross-section, reducing the Ti fibres to sub-micron thickness. The fibres were studied by extraction after selective dissolution of the a-AI matrix. There was no interfacial reaction between a-AI and Ti or any measurable oxide formation, thus providing encouragement for the manufacture of metal-metal composites by eo-spray forming. A powder injection pump was successfully integrated and commissioned on the spray forming facility at Oxford University. The pump was calibrated to optimise powder flow rates. Three AI-4Cu+ Ti composite billets were processed with each containing Ti powder with a different processing history. Up to 20vol%Ti was successfully incorporated, however due to the cooling effect from powder injection, porosity was significant. The quenching effect provided a finer AI-4Cu grain structure in the region of Ti injection, and also promoted precipitation of O'-AbCu precipitates. A Ti/ Al-4Cu interfacial reaction was more prominent in the billet spray formed at 850°C than those spray formed at 750°C. Angular Ti processed by a hydride-dehydride route had better deformation characteristics than spherical gas atomised Ti. Deformation processing by extrusion and rolling was investigated for Al-4Cu+20vol%Ti using SEM, EBSD and FIB. After extrusion to a strain of 5, the composite contained elongated reinforcing fibres characteristic of metal-metal composites. The microstructure studied by EBSD revealed equiaxed polygonal Al-4Cu matrix grains. Rolling was not as efficient as extrusion in producing elongated Ti fibres and was attributed to a lower deformation processing temperature. The rolled composites consisted of elongated Al-4Cu grains 1-5J1m in thickness. An UTS of 339MPa at a strain of 3 was attributed to texture strengthening in the Q- AI.
|
20 |
Degradation of mechanical properties of vinylester and carbon fiber/vinylester composites due to environmental exposureUnknown Date (has links)
An experimental investigation was undertaken to determine the effects of marine environmental exposure on the mechanical properties of vinylester resins (VE510A and VE8084) and carbon fiber/VE510A vinylester composites. The effect of carbon fiber sizing on the composite strengths was also examined. Neat resins were exposed to marine environments until moisture content reached a point of saturation after which they were tested in tension, compression and shear. Compared to the baseline dry specimens, specimens subjected to moisture showed overall increased ductility and a reduction in strength. Dry and moisture saturated composite specimens were tested in tension and compression in different orientations. Longitudinal specimens were tested in in-plane shear and interlaminar shear. Composites with F-sized carbon fibers displayed overall higher strength than those with G-sized fibers at both dry and moisture saturated conditions. An analysis of moisture absorption of the composites was performed which vii shows that the moisture up-take is dominated by the fiber/matrix region which absorbs up to 90% of the moisture. The composites experienced reduced strength after moisture absorption. The results revealed that the fiber sizing has stronger effect on the fiber/matrix interface dominated strengths than moisture up-take. / by Alexander M. Figlionini. / Thesis (M.S.C.S.)--Florida Atlantic University, 2011. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2011. Mode of access: World Wide Web.
|
Page generated in 0.1606 seconds