• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 1
  • Tagged with
  • 2
  • 2
  • 2
  • 2
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
1

Study of improved design and physical properties of 12CaO.7Al2O3 thin films

Feizi, Elnaz January 2012 (has links)
Calcium aluminate compound, 12CaO.7Al2O3, was prepared via an improved sol-gel technique in the form of thin film on magnesium oxide (MgO) single crystal substrate as well as powder. The microstructures of the films were observed before and after crystallization, and the effect of solution processing parameters, including the molar fractions of the ingredients, on the continuity of the films and the formation of surface defects was studied. An optimized sol-gel process using a new solution recipe was developed based on the microstructural observations. Homogeneous thin films of 12CaO.7Al2O3 with high critical thickness (~ 5 − 6 μm)were produced using this optimized technique. The chemical composition of the films was determined using energy dispersive spectroscopy and X-ray photoelectron spectroscopy. Raman and Fourier transform infrared (FTIR) spectral analyses were employed in order to investigate the effect of heat treatment temperature on the crystallization of 12CaO.7Al2O3 film on magnesium oxide substrate. The results of the phase analysis show that a single-phase film of 12CaO.7Al2O3 is formed at a temperature of 1300 oC. A crystallized structure with well-defined grain boundaries is obtained after 2 hr of heat treatment at this temperature under normal air atmosphere. The phase formation of 12CaO.7Al2O3 in powder form was investigated via room-temperature and high-temperature X-ray diffraction (XRD) and crystallization of 12CaO.7Al2O3 and CaO.Al2O3 powders started taking place simultaneously at a temperature of ~ 900 oC. A comparison between the FTIR results of the films with XRD results of the powder proved the crystallization of 12CaO.7Al2O3 thin film to start at a higher temperature compared to the powder. Furthermore, a single-phase 12CaO.7Al2O3 tends to form in thin film on MgO substrate, whereas the formation of 12CaO.7Al2O3 is accompanied by the formation of secondary phases of CaO.Al2O3 and 3CaO.Al2O3. The optical absorption properties of the 12CaO.7Al2O3 films were investigated at different temperatures from room temperature to 300 oC and the experimental data were analysed in Tauc and Urbach regions. The optical band gap decreased from 4.088 eV at 25 oC to 4.051 eV at 300 oC, while Urbach energy increased from 0.178 eV at 25 oC to 0.257 eV at 300 oC. The relationship between the optical band gap and the Urbach energy at different temperatures showed an almost linear relationship from which the theoretical values of 4.156 and 0.065 eV were evaluated for the band gap energy and Urbach energy of a 12CaO.7Al2O3 crystal with zero structural disorder at 0 K.
2

TiAlN-based Coatings at High Pressures and Temperatures

Pilemalm, Robert January 2014 (has links)
TiAlN and TiAlN-based coatings that are used of relevance as protection of cutting tool inserts used in metal machining have been studied. All coatings were deposited by reactive cathodic arc evaporation using industrial scale deposition systems. The metal content of the coatings was varied by using different combinations of compound cathodes. The as-deposited coatings were temperature annealed at ambient pressure and in some cases also at high pressure. The resulting microstructure was first evaluated through a combination of x-ray diffraction and transmission electron microscopy. In addition, mechanical properties such as hardness by nanoindentation were also reported. TiAlN coatings with two different compositions were deposited on polycrystalline boron nitride substrates and then high pressure high temperature treated in a BELT press at constant 5.35 GPa and at 1050 and 1300 °C for different times. For high pressure high temperature treated TiAlN it has been shown that the decomposition is slower at higher pressure compared to ambeint pressure and that no chemical interaction takes place between TiAlN and polycrystalline cubic boron nitride during the experiments. It is concluded that this film has the potential to protect a polycrystalline cubic boron nitride substrate during metal machining due to a high chemical integrity. TiZrAlN coatings with different predicted driving forces for spinodal decomposition were furthermore annealed at different temperatures. For this material system it has been shown that for Zr-poor compositions the tendency for phase separation between ZrN and AlN is strong at elevated temperatures and that after spinodal decomposition stable TiZrN is formed.

Page generated in 0.1188 seconds