O uso do hidrogênio, como vetor energético, representa uma opção promissora a fim de se reduzir a dependência dos combustíveis fósseis e controlar a emissão de poluentes na atmosfera. Atualmente, uma das rotas mais propícias para produção de hidrogênio envolve a reação de reforma a vapor de álcoois utilizando-se catalisadores de níquel suportados em alumina. O níquel é amplamente utilizado em catálise devido ao baixo custo e à elevada atividade para ruptura da ligação C-C. A alumina, por sua vez, promove maior dispersão do metal ativo devido aos valores elevados de área superficial das estruturas cristalinas de transição, sobretudo da fase gama, característica esta diretamente relacionada às condições de síntese. A incorporação de lantânia, como aditivo, tem sido considerada por moderar a acidez da superfície do suporte e minimizar a deposição de carbono no catalisador durante a reação de reforma. Tendo em vista que a atividade dos catalisadores na reação de reforma é função das características físicas e químicas desses materiais, avaliou-se, no presente trabalho, a rota de síntese por coprecipitação de hidróxidos em associação ao uso de surfactante e tratamento solvotérmico. A rota de mistura de pós de óxido de níquel com alumina, ambos preparados por precipitação individual, foi adotada para comparação dos resultados obtidos por coprecipitação. Nas condições otimizadas do processo, estudou-se o efeito da adição de óxido de lantânio nas propriedades dos materiais sintetizados. Verificou-se que o método de coprecipitação permitiu a obtenção de óxidos mistos com elevada área superficial (na faixa de 170 a 260 m2g-1), ao passo que a mistura de óxidos conduziu à formação de pós constituídos por fases distintas de alumina e óxido de níquel, com menor área superficial (na faixa de 60 a 180 m2.g-1). Após avaliação do comportamento de redução do óxido de níquel contido nesses materiais, as propriedades dos pós obtidos foram correlacionadas com o desempenho na produção de hidrogênio pela reforma do etanol. De acordo com os resultados, o catalisador preparado por coprecipitação apresentou menor atividade na produção de hidrogênio, comparativamente aos materiais obtidos por coprecipitação em associação com tratamento solvotérmico e mistura de óxidos. Em contraste, verificou-se uma menor quantidade de carbono acumulado sobre o catalisador preparado por coprecipitação, indicativo da elevada estabilidade catalítica deste material durante a reação de reforma. / Hydrogen use as an energy vector represents a promising option in order to reduce the dependence on fossil fuels and to control the emission of pollutants into the atmosphere. Nowadays, one of the most important routes for hydrogen production includes steam reforming reactions of alcohols over alumina-supported nickel catalysts. Nickel is largely applied in catalysis because of its low cost and high activity for C-C bond rupture. Alumina, in turn, promotes appropriate dispersion of the active metal due to the high surface area values of its transition crystalline structures, especially gamma phase. These characteristics are related to synthesis conditions. Incorporation of lanthana as an additive has been considered to control alumina surface acidity and to inhibit catalyst deactivation by carbon deposition during reforming reaction. Considering that catalyst activity is a function of materials physical and chemical properties, it was evaluated in this work powder synthesis route by coprecipitation in association with surfactant templating method and solvothermal treatment. Mechanical milling of nickel oxide and alumina powders, which were individually prepared by chemical precipitation, was adopted for comparison purposes. Under optimized preparation conditions, the effect of lanthanum oxide addition on the materials properties was studied. It was verified that coprecipitation allowed the production of high surface area mixed oxides (170-260 m2g-1). Mechanical mixture led to the formation of materials constituted by alumina and nickel oxide phases, with low surface area (60-180 m2.g-1). After evaluation of nickel oxide reduction behavior, in hydrogen atmosphere, a correlation between properties and performance in hydrogen production by ethanol steam reforming was established. According to the results, the catalyst prepared by coprecipitation was less active for hydrogen generation compared to the ones obtained by coprecipitation followed by solvothermal treatment and mechanical milling methods. In contrast, the lowest amount of carbon deposits was found on the catalyst prepared by coprecipitation, which is an indicative of the high catalytic stability during reforming reaction.

O uso do hidrogênio, como vetor energético, representa uma opção promissora a fim de se reduzir a dependência dos combustíveis fósseis e controlar a emissão de poluentes na atmosfera. Atualmente, uma das rotas mais propícias para produção de hidrogênio envolve a reação de reforma a vapor de álcoois utilizando-se catalisadores de níquel suportados em alumina. O níquel é amplamente utilizado em catálise devido ao baixo custo e à elevada atividade para ruptura da ligação C-C. A alumina, por sua vez, promove maior dispersão do metal ativo devido aos valores elevados de área superficial das estruturas cristalinas de transição, sobretudo da fase gama, característica esta diretamente relacionada às condições de síntese. A incorporação de lantânia, como aditivo, tem sido considerada por moderar a acidez da superfície do suporte e minimizar a deposição de carbono no catalisador durante a reação de reforma. Tendo em vista que a atividade dos catalisadores na reação de reforma é função das características físicas e químicas desses materiais, avaliou-se, no presente trabalho, a rota de síntese por coprecipitação de hidróxidos em associação ao uso de surfactante e tratamento solvotérmico. A rota de mistura de pós de óxido de níquel com alumina, ambos preparados por precipitação individual, foi adotada para comparação dos resultados obtidos por coprecipitação. Nas condições otimizadas do processo, estudou-se o efeito da adição de óxido de lantânio nas propriedades dos materiais sintetizados. Verificou-se que o método de coprecipitação permitiu a obtenção de óxidos mistos com elevada área superficial (na faixa de 170 a 260 m2g-1), ao passo que a mistura de óxidos conduziu à formação de pós constituídos por fases distintas de alumina e óxido de níquel, com menor área superficial (na faixa de 60 a 180 m2.g-1). Após avaliação do comportamento de redução do óxido de níquel contido nesses materiais, as propriedades dos pós obtidos foram correlacionadas com o desempenho na produção de hidrogênio pela reforma do etanol. De acordo com os resultados, o catalisador preparado por coprecipitação apresentou menor atividade na produção de hidrogênio, comparativamente aos materiais obtidos por coprecipitação em associação com tratamento solvotérmico e mistura de óxidos. Em contraste, verificou-se uma menor quantidade de carbono acumulado sobre o catalisador preparado por coprecipitação, indicativo da elevada estabilidade catalítica deste material durante a reação de reforma. / Hydrogen use as an energy vector represents a promising option in order to reduce the dependence on fossil fuels and to control the emission of pollutants into the atmosphere. Nowadays, one of the most important routes for hydrogen production includes steam reforming reactions of alcohols over alumina-supported nickel catalysts. Nickel is largely applied in catalysis because of its low cost and high activity for C-C bond rupture. Alumina, in turn, promotes appropriate dispersion of the active metal due to the high surface area values of its transition crystalline structures, especially gamma phase. These characteristics are related to synthesis conditions. Incorporation of lanthana as an additive has been considered to control alumina surface acidity and to inhibit catalyst deactivation by carbon deposition during reforming reaction. Considering that catalyst activity is a function of materials physical and chemical properties, it was evaluated in this work powder synthesis route by coprecipitation in association with surfactant templating method and solvothermal treatment. Mechanical milling of nickel oxide and alumina powders, which were individually prepared by chemical precipitation, was adopted for comparison purposes. Under optimized preparation conditions, the effect of lanthanum oxide addition on the materials properties was studied. It was verified that coprecipitation allowed the production of high surface area mixed oxides (170-260 m2g-1). Mechanical mixture led to the formation of materials constituted by alumina and nickel oxide phases, with low surface area (60-180 m2.g-1). After evaluation of nickel oxide reduction behavior, in hydrogen atmosphere, a correlation between properties and performance in hydrogen production by ethanol steam reforming was established. According to the results, the catalyst prepared by coprecipitation was less active for hydrogen generation compared to the ones obtained by coprecipitation followed by solvothermal treatment and mechanical milling methods. In contrast, the lowest amount of carbon deposits was found on the catalyst prepared by coprecipitation, which is an indicative of the high catalytic stability during reforming reaction.

Mechanical properties of aluminium alloys highly depend on their phase composition and microstructure. High strength can be achieved among others by introduction of a high volume fraction of fine, homogeneously distributed second phase particles and by a refinement of the grain size. Powder metallurgy allows to prepare fine grained materials with increased solid solubility which are favourable precursors for further precipitation strengthening. Gas atomization was used for the preparation of powders of the commercial Al7075 alloy and its modification containing 1 wt% Zr. A part of gas atomized powders was mechanically milled at different conditions. Mechanical milling reduced the grain size down to the nano-size range and the corresponding microhardness exceeded the value of 300 HV. Powders were consolidated by the spark plasma sintering method to nearly fully dense compacts. Due to a short time and relatively low temperature of sintering the favourable microstructure can be preserved in the bulk material. The grain size of compacts prepared from milled powder was retained in the submicrocrystalline range and the microhardness close to 200 HV exceeded that of the specially heat treated ingot metallurgical counterparts. The prepared compacts retained their fine grained structure and high...

Dans le cadre du développement de matériaux de gainage combustible pour les réacteurs à neutrons rapides refroidis au sodium (RNR-Na), cette étude s’intéresse au développement d’un procédé innovant d’élaboration d’aciers renforcés par dispersion d’oxyde (aciers ODS) par mécanosynthèse qui doit éviter l’apparition de précipités de tailles micrométriques indésirables dont la présence dégrade drastiquement les propriétés mécaniques. Ce nouveau procédé consiste à introduire directement des nanoparticules d’oxydes de structure pyrochlore Y2Ti2O7 dans une poudre métallique Fe-Cr via un broyage. Pour cela, un procédé de synthèse des oxydes de structure pyrochlore Y2Ti2O7 par co-broyage des poudres nanométriques Y2O3 et TiO2 a d’abord été mis en place au laboratoire. L’optimisation des conditions de broyage a permis d’obtenir une poudre nanostructurée de nature voulue et de grande pureté. Grâce au produit obtenu, la gamme de fabrication innovante d’aciers ODS proposée a pu être développée puis validé, à petite échelle puis à l’échelle semi-industrielle. Ce nouveau procédé a été utilisé pour étudier l’impact des conditions de broyage et de la composition chimique sur les caractéristiques des matériaux produits, et a permis d’établir le lien entre conditions d’élaboration, microstructure et propriétés mécaniques. Cette étude permet d’abord de valider le mode d’introduction des renforts sous la forme Y2Ti2O7 comme une méthode efficace pour l’obtention d’aciers ODS performants. De plus, elle révèle l’importance des conditions d’élaboration, et en particulier du broyage, sur la microstructure et les propriétés mécaniques des aciers ODS. Les résultats mis en avant ouvrent des perspectives prometteuses en ce qui concerne l’optimisation des conditions d’élaboration des aciers ODS. / This study concerns the development of an innovative manufacturing process for oxidedispersion strengthened steel (hereafter referred to as “ODS”) by mechanosynthesis. As part of materials development for Sodium-cooled Fast Reactors (SFR), the aim is to prevent the growth of undesirable micrometric precipitates which can drastically degrade steel’s mechanical properties. This new process introduces Y2Ti2O7 pyrochlore oxide nanoparticles directly into Fe-Cr metallic powder through mechanical milling. To achieve this, a process has been set up to synthesize Y2Ti2O7 pyrochlore oxides via mechanical alloying of nanosized Y2O3 and TiO2 powders. Optimization of the milling parameters enabled the production of a pure nanostructured powder of the desired nature. Thereafter, the innovative ODS steel manufacturing process was validated on a small and then semiindustrial scale. This new process was used to study the impact of milling parameters and chemical composition on the produced material’s features and enabled the establishment of a link between milling conditions, microstructure and mechanical properties. This study first enables the validation of the method of introducing precipitates in the form of Y2Ti2O7 oxides as an efficient way to obtain competitive ODS steel. Moreover, it reveals the importance of the features of the manufacturing process, particularly milling conditions, on the microstructure and mechanical properties of ODS steel. The results reveal promising perspectives concerning the features of ODS steel manufacturing.

Made available in DSpace on 2017-07-21T20:42:32Z (GMT). No. of bitstreams: 1 Melina Correa Gabriel.pdf: 5915390 bytes, checksum: bae67fca28fd7999823fa6ec6ac98844 (MD5) Previous issue date: 2010-03-29 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / The intention of this exploratory research is to study the modifications provided by high-energy mechanical milling in ultra-high molecular weight polyethylene (UHMWPE) and mixtures of this polymer with polyethylene glycol (PEG). These modifications can be of interest for future processing of UHMWPE. The mechanical milling was performed in an attritor mill, a type of mill that can be used in laboratory as well as in industry. The millings of UHMWPE were performed in different rotation speeds. For mixtures of UHMWPE and PEG, the amounts of PEG were also different. The samples were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The mechanical milling modified the UHMWPE particles morphology: with milling, the almost rounded shape became flat-like shape. This caused the reduction of apparent density of polymer after milling. The mechanical milling also provided structural changes. With the increasing of the rotation speed,there was the increasing of the monoclinic phase and the decreasing of the orthorhombic, up to 500 rpm. For 600 rpm, the amount of monoclinic phase decreased. In this rotation, the deformation rate probably increased the process temperature, allowing the monoclinic phase to return to its initial structural orthorhombic form. In mixtures of UHMWPE and PEG, after mechanical milling, the particles of PEG were probably reduced and better dispersed in the UHMWPE matrix. Changes in thermal characteristics of polymers also could be noted. The kinetics of UHMWPE crystal growth changed, as well as the behavior of PEG crystallization. Feasibly, dispersed particles of PEG acted as physical barriers against the crystalline phase growth of UHMWPE and the crystallization temperature of PEG decreased, when the UHMWPE and PEG mixtures were milled. / Este trabalho exploratório teve por objetivo estudar as modificações promovidas por moagem de alta energia no de polietileno de ultra-alta massa molar (PEUAMM) e sua mistura com polietileno glicol (PEG), que podem ser de interesse para auxiliar um posterior processamento do PEUAMM. As moagens foram realizadas em um moinho do tipo attritor, um tipo de moinho que pode ser usado tanto em laboratório quanto em escala industrial. Foram variadas as velocidades de rotação na moagem do PEUAMM, além das concentrações de PEG, quando feita a mistura. As amostras foram caracterizadas por microscopia eletrônica de varredura (MEV), microscopia de força atômica (MFA), calorimetria exploratória diferencial (DSC) e difração de raios X. A moagem de alta energia do material modificou a forma das partículas de PEUAMM, passando de arredondadas a flakes, com a evolução do processo de moagem, fazendo com que a densidade aparente do polímero diminuísse muito comparado ao polímero não moído. A moagem também proporcionou mudança estrutural, permitindo a formação de fase monoclínica em detrimento da ortorrômbica. A medida que se aumentou a rotação do moinho até 500 rpm, houve um crescimento da fase monoclínica. Apenas para 600 rpm, a quantidade dessa fase sofreu decréscimo, devido possivelmente ao aumento da frequência de choques e da temperatura de processamento, fazendo com que a estrutura monoclínica retornasse à estrutura ortorrômbica original. Na mistura de PEUAMM com PEG, a moagem provavelmente permitiu redução das partículas e a melhor dispersão de PEG na matriz de PEUAMM. Também se observaram mudanças nas características térmicas dos polímeros na mistura após moagem. Ocorreu mudança na cinética de crescimento dos cristais de PEUAMM e mudança no comportamento de cristalização do PEG, comportamento este que não ocorreu para o PEUAMM moído ou para a mistura de PEUAMM com PEG antes da moagem. Possivelmente, as partículas dispersas de PEG atuaram como barreiras ao crescimento da fase cristalina do PEUAMM e houve diminuição da temperatura de cristalização do PEG, na mistura com PEUAMM após moagem.

Les verres de chalcogénures sont utilisés en tant qu'optiques pour les caméras IR grâce à leur transparence dans les deux fenêtres atmosphériques [3 – 5 µm] et [8 – 12 µm]. Afin de diminuer leur prix et d'augmenter la gamme des compositions qui pourraient être produites, une nouvelle méthode de synthèse a été élaborée au laboratoire Verres et Céramiques. Les travaux présentés dans ce manuscrit ont ainsi porté sur le développement de la technique de synthèse des verres et vitrocéramiques de chalcogénures par mécanosynthèse et frittage flash, ainsi que sur l'étude de la structure et des propriétés mécaniques des vitrocéramiques. Les différents paramètres de broyage et frittage ont été étudiés et la possibilité de produire des matériaux massifs, avec une structure et des propriétés similaires à celles des verres obtenus par voie classique de fusion-trempe, a été démontrée. Egalement, il a été constaté que la génération des particules cristallines dans la matrice vitreuse permet d'améliorer les propriétés mécaniques sans altérer la transmission optique des échantillons. Finalement, une étude théorique, basée sur la méthode DFT, a été initié pour accéder à des informations plus précises concernant la structure et les propriétés mécaniques des verres et vitrocéramiques de chalcogénures. / Chalcogenide glasses are used as optics for the IR cameras thanks to their transparence in the two atmospheric windows [3 – 5 µm] and [8 – 12 µm]. In order to reduce their price and to increase the panel of compositions which may be produced, a new method of synthesis has been elaborated in the Glass and Ceramics group. Thus, this manuscript presents the development of the new way of synthesis of chalcogenide glasses and glass-ceramics by mechanical milling and SPS sintering, and the study of the structure and mechanical properties of glass-ceramics. The different milling and sintering parameters have been studied and the possibility to produce bulk samples with a structure and properties similar to those of glasses synthesized by melt-quenching method has been demonstrated. Also, it has been shown that the generation of crystalline particles in the glassy matrix increases mechanical properties of the samples without spoiling their optical transmission. Finally, a theoretical study, based on the DFT method, has been initiated in order to access more precise information concerning glass and glass-ceramic structure and mechanical properties.

In this thesis, the effect of mechanical deformation on structure, thermal stability and hardness of a single-phase spray-deposited quasicrystalline alloy with composition Al62.5Cu25Fe12.5 has been investigated in detail. The purpose of the investigation was to study the effect of mechanical milling at different milling speeds (which approximately scale with the milling intensity) on mechanically-induced phase transformations during milling and on the phase evolution during subsequent heating. The results of the milling experiments indicate that, irrespective of the milling speeds used, mechanical milling of Al62.5Cu25Fe12.5 quasicrystals leads to the formation of a disordered CsCl-type ß phase with grain size of about 10 – 20 nm. The analysis of the kinetics of the QC–to–ß phase transformation reveals that the milling intensity has a considerable effect on the characteristics of the transformation. The increase of the milling speed considerably shortens the incubation time needed to start the QC–to–ß phase transformation. Also, the overall transformation is much faster for milling at high speeds. The QC–to–ß phase transformation starts when the grain size of the quasicrystals is reduced to about 10 nm irrespective of the milling speed used and clearly indicates that a critical grain size of the quasicrystals for initiating the transformation exists. On the other hand, no critical value of lattice strain was found for the QC–to–ß transformation. This indicates that the phase transformation is controlled by the local length scale (i.e. the grain size) and by the corresponding grain boundaries rather than by the energy stored in the lattice. Energetic considerations obtained through a simple model based on the mass and velocity of the milling balls reveal that the energy needed for the QC–to–ß transformation increases with increasing the milling speed, that is, the energetic efficiency of the process decreases with increasing the milling intensity. This indicates that part the extra energy supplied during milling at high intensities is not used to induce the phase transformation but it is dissipated by heat. During heating, the milled powder displays a multi-step thermal behavior characterized by the grain growth of the disordered ß phase at low temperatures, followed, at higher temperatures, by its transformation into the original icosahedral quasicrystalline phase. The transformation is gradual and the quasicrystals and the disordered ß phase coexist over a temperature interval of more than 250 K. The phase transformations occurring during milling and subsequent annealing have a remarkable effect on the hardness, which can be tuned within a wide range of values (7–9.6 GPa) as a function of the volume fraction of the different phases. This suggests that a composite material with optimized mechanical properties can be produced by an appropriate thermo-mechanical treatment. The quasicrystals milled at a very low speed show a transition between Hall-Petch to inverse Hall-Petch behavior at a grain size of about 40 nm, which represents the critical value for grain size softening of the present Al62.5Cu25Fe12.5 quasicrystals. This behavior may be attributed to the complexity of the quasicrystalline structure and to its peculiar deformation mechanism at room temperature (i.e. shear banding), where meta-dislocation-assisted deformation is almost absent. In order to analyze the effectiveness of the Al62.5Cu25Fe12.5 quasicrystals as reinforcing agent in metal matrix composites, Al-based composites were synthesized by hot extrusion of elemental Al blended with different amounts of Al62.5Cu25Fe12.5 quasicrystalline particles. The work was focused on two specific aspects: evaluation of the mechanical properties through room temperature compression tests and modeling of the resulting properties. The addition of the quasicrystalline reinforcement is very effective for improving the room temperature mechanical properties of pure Al. The compressive strength increases from 155 MPa for pure Al to 330 and 407 MPa for the composites with 20 and 40 vol.% of reinforcement, respectively, reaching an ultimate strain of 55 % and 20 % before fracture occurs. These results indicate that the addition of the QC reinforcement leads to composite materials with compressive strengths exceeding that of pure Al by a factor of 2 – 2.5, while retaining appreciable plastic deformation. The mechanical properties of the composites have been modeled by taking into account the combined effect of load bearing, dislocation strengthening and matrix ligament size effects. The calculations are in very good agreement with the experimental results and reveal that the reduction of the matrix ligament size, which results in a similar strengthening effect as that observed for grain refinement, is the main strengthening mechanism in the current composites. Finally, the interfacial reaction between the Al matrix and the QC reinforcement has been used to further enhance the strength of the composites through the formation of a new microstructure consisting of the Al matrix reinforced with Al7Cu2Fe w-phase particles. The optimization of the structure-property relationship was done through the systematic variation of the processing temperature during consolidation. The mechanical behavior of these transformation-strengthened composites is remarkably improved compared to the parent material. The yield strength of the composites significantly increases as the Al + QC -> ω transformation progresses from 195 MPa for the sample reinforced only with QC particles to 400 MPa for the material where the Al + QC -> ω reaction is complete. These results clearly demonstrate that powder metallurgy, i.e. powder synthesis by ball milling followed by consolidation into bulk specimens, is an attractive processing route for the production of novel and innovative lightweight composites characterized by high strength combined with considerable plastic deformation. In addition, these findings indicate that the mechanical behavior of Al-based composites reinforced with Al62.5Cu25Fe12.5 quasicrystalline particles can be tuned within a wide range of strength and plasticity depending on the volume fraction of the reinforcement as well as on the extent of the interfacial reaction between Al matrix and QC reinforcing particles.