In this work, feasibility of utilizing municipal incinerator fly ash (MIFA) of different sources as a substitute of raw materials for steel-making in a mini-mill was studied. Also studied included the efficacy of this mode of melting treatment and recycling. Under the condition of adding 1 wt% MIFA to scrap iron/scrap steel for partial replacement of lime, the L9 orthogonal arrays of Taguchi methods were utilized to investigate the effects of MIFA melting treatment of different sources by an electric arc furnace (EAF). Four experimental factors (i.e., scrap iron mass, lime mass, coke mass, and MIFA mass) were selected to study their effects on Pb leaching of EAF dust and slag. Test results for MIFA obtained from Plants K1, K2, and K3 show that EAF dust remains hazardous as it is originally a listed waste. On the other hand, slag so generated remains nonhazardous based on the TCLP results. The experimental results of EAF dust and slag were further subjected to the analysis of variance (ANOVA) and regular analysis. Using this process, the optimal operating conditions with respect to the leached Pb concentration would be as follows: (1) Plant K1(injection mode operation)--87 tons of scrap iron, 1.4 tons of lime, 0.4 ton of coke, and 0.9 ton of MIFA; (2) Plant K2(injection mode operation)--90 tons of scrap iron, 1.4 tons of lime, 0.7 ton of coke, and 1.1 tons of MIFA; (3) Plant K2(one-time-charge mode operation)--90 tons of scrap iron, 1.4 tons of lime, 0.9 ton of coke, and 0.7 ton of MIFA; (4) Plant K3(injection mode operation)--85 tons of scrap iron, 1.4 tons of lime, 0.7 ton of coke, and 0.9 ton of MIFA; and (5) Plant K3(one-time-charge mode operation)--87 tons of scrap iron, 1.5 tons of lime, 0.4 ton of coke, and 0.7 ton of MIFA. In this study, using MIFA from Plant K2 as an example, it was found that it required 29-35 kg of lime per ton of steel billets produced when MIFA was added. Under a normal operation of EAF steel-making, however, it required 35-45 kg of lime per ton of steel billets produced based on the past experience. In average, when MIFA is added, it needs only 32 kg of lime per ton of steel billets produced as compared to 40 kg of lime for regular steel-making. In other words, it would result in a reduction of 8 kg of lime per ton of steel billets produced by using this novel process. Based on an average monthly production of 20,973 tons of steel billets and a unit cost of 2,200 NT$ per ton of lime, a monthly saving of lime cost would be 369,125 NT$. Namely, about 4.4 million NT$ per year. In addition, it was also found that using this novel process to melt MIFA would not deteriorate the quality of steel billets and bars produced.