In many developing economies, a high percentage of domestic energy demand is for cooking based on fossil and biomass fuels. Their use has serious health consequences affecting almost 3 billion people. Cleaner cooking systems have been promoted in these countries such as solar cooking and smokeless stoves with varying degrees of success. In parallel, solar electrolytic hydrogen systems have been developed and increasingly used during the last 25 years for electricity, heat and automobile fueling applications. This study has developed and tested experimentally in the laboratory a solar hydrogen plant numerical model suitable for small communities, to generate and store cooking fuel. The numerical model was developed in TRNSYS and consists of PV panels supplying a PEM electrolyser of 63.6% measured stack efficiency and hydrogen storage in metal hydride cylinders for household distribution. The model includes novel components for the operation of the PEM electrolyser, its controls and the metal hydride storage, developed based on data of hydrogen generation, stack temperature and energy use from a purpose constructed small-scale experimental rig. The model was validated by a second set of experiments that confirmed the accurate prediction of hydrogen generation and storage rates under direct power supply from PV panels. Based on the validated model, large-scale case studies for communities of 20 houses were developed. The system was sized to generate enough hydrogen to provide for typical domestic cooking demand for three case-studies; Jamaica, Ghana and Indonesia. The daily cooking demands were calculated to be 2.5kWh/day for Ghana, 1.98kWh/day for Jamaica and 2kWh/day for Indonesia using data mining and a specific quantitative survey for Ghana. The suitability of weather data used in the model was evaluated through Finkelstein Schafer statistics based on composite and recent weather data and by comparing simulation results. A difference of 0.9% indicated that the composite data can be confidently used. Simulations results indicate that a direct connection system to the PV plant rather than using a battery is the optimal design option based on increased efficiency and associated costs. They also show that on average 10tonnes of CO2/year/household can be saved by replacing biomass fuel with hydrogen. The potential of total savings in the three case-study countries is shown in the form of novel solar hydrogen potential maps. The results of this study are a contribution towards better understanding the use of hydrogen systems and enhancing their role in renewable energy policy.

Au cours des dernières années, le développement des batteries Li-ion a révolutionné nos modes de vie. Compte tenu de la croissance exponentielle en batteries, le besoin se répercute sur les matériaux de base, qui sont entre autres, synthétisés à partir de sels de lithium de haute pureté. Nemaska Lithium, une entreprise partenaire du projet, est reconnue en tant que nouveau producteur d’hydroxyde de lithium, par l’entremise d’un procédé électromembranaire breveté. Comparativement au procédé conventionnel, la solution mise en place est l’une des méthodes la plus économique et écologique à l’échelle mondiale. Dans le but de diminuer encore plus les coûts énergétiques du procédé, l’usage d’une anode dépolarisée à l’hydrogène ((ADH); H2(g) ⇄ 2H+(aq) +2é; E=0,00 V) est considérée. Cette approche demande une certaine compréhension et optimisation de l’électrode à des fins d’adaptation pour l’électrolyse. Ainsi, ce travail tant fondamental qu’appliqué a été réalisé afin d’étudier les phénomènes se produisant à l’ADH. Dans un premier temps, une étude portée sur la cinétique de réaction de l’oxydation de l’hydrogène à l’aide d’une électrode à disque tournant est réalisée. L’influence d’ions lithium et d’une couche catalytique composite sur l’efficacité de la réaction a ainsi pu être démontrée. L’identification des limitations du système a ensuite permis l’optimisation de l’ADH à l’aide d’un plan d’expérience. L’ADH est composée d’un ionomère, d’un catalyseur et d’un support à catalyseur, qui ont des propriétés intrinsèques ayant un impact direct sur l’efficacité et la durabilité de celle-ci. Conséquemment, pour une étude de performance et d’optimisation, plusieurs configurations d’assemblage d’électrode à membrane (MEA) ont été considérées visant à faire varier les proportions des différentes composantes avec un plan d’expérience. Ce projet a ainsi permis l’étude menant à une meilleure compréhension d’une nouvelle technologie d’électrolyse membranaire. / In recent years, the development of Li-ion batteries has revolutionized our lifestyles. Given the exponential demand for batteries, the requirement is for base materials, which are synthesized from high-purity lithium salts. Nemaska Lithium, a partner in the project, is recognized as a new producer of lithium hydroxide, using a patented electromembrane process. Compared to the conventional process, this solution is one of the most economical and environmentally friendly methods worldwide. In order to further reduce the energy costs of the process, the use of a hydrogen depolarized anode ((HDA); H2(g) ⇄ 2H+(aq) +2é; E0=0,00 V) is considered. This approach requires some understanding and optimization of the electrode for electrolysis adaptations. Thus, this fundamental and applied work was conducted to study the phenomena occurring at the HDA. First, a study on the kinetics of the hydrogen oxidation reaction using a rotating disk electrode is performed. The influence of lithium ions and a composite catalytic layer on the efficiency of the reaction was demonstrated. The identification of system limitations allowed the optimization of the DHA using a design of experiment. The components of a HDA have intrinsic properties which have a direct impact on its efficiency and durability. They consist of an ionomer, a catalyst, and a catalyst support. Consequently, for a performance and optimization study, several membrane electrode assembly (MEA) configurations were considered in order to vary the proportions of the different components with a design of experiment. This study provided a better understanding and development of this new membrane electrolysis technology.