Spelling suggestions: "subject:"metamaterial"" "subject:"detaljmaterial""
1 |
Application of chiral cellular materials for the design of innovative componentsSpadoni, Alessandro 25 August 2008 (has links)
Low-density cellular solids have demonstrated superior mechanical properties as well as multifunctional characteristics, which may provide a basis for the development of novel structured materials. In particular, cellular solids offer great design flexibility, owing to their topology, which can provide desired functionalities via targeted geometric design and proper selection of the constituent material. While stochastic configurations such as metallic foams have proven to be effective for both thermal insulation and mechanical-energy absorption, the topology of deterministic architectures is not constrained by physical processes. This allows for a variety of configurations to be tailored to simultaneously fulfill disparate tasks. An additional aspect of deterministic cellular structures is the possibility of assembling materials or structures by the spatial repetition of a unit cell. The resulting periodicity of such systems simplifies the characterization of physical properties, which can be established by analyzing the unit cell only, and will provide new opportunities in the fields of structural dynamics, where periodicity-induced impedance leads to the control of both constructive and destructive interference on propagating waves.
The objective of this work is to investigate the application of the chiral cellular topology for the design of novel macrostructural, mesostructural and microstructural configurations. A truss-core airfoil, and a truss-core beam are employed as a basis to demonstrate both large-displacement capabilities within the elastic regime of the constituent material, as well as operational deflection shapes with localized dynamic deformations. Large deformation capabilities and unique operational deflection shapes are to be attributed to the unusual deformation mechanism of the chiral lattice. Mesostructural and microstructural configurations, on the other hand, are characterized by an unique mechanical behavior, complex geometry, as well as geometric design flexibility to control both static and dynamic phenomena. The propagation of elastic waves, moreover, is characterized by significant band-gap density as well as strong energy focusing dependent on frequency and wavenumber. These features suggest the chiral topology as a basis for the development of acoustic meta-materials.
|
2 |
Evaluation of Negative Stiffness Elements for Enhanced Material Damping CapacityKashdan, Lia Beatrix 29 October 2010 (has links)
Constrained negative stiffness elements in volume concentrations (1% to 2%) embedded within viscoelastic materials have been shown to provide greater energy absorption than conventional materials [Lakes et al., Nature (London) 410, 565–567 (2001)]. This class of composite materials, called meta-materials, could be utilized in a variety of applications including noise reduction, anechoic coatings and transducer backings. The mechanism underlying the meta-material's behavior relies on the ability of the negative stiffness element to locally deform the viscoelastic material, dissipating energy in the process. The work presented here focuses specifically on the design of the negative stiffness elements, which take the form of buckled beams. By constraining the beam in an unstable, S-shaped configuration, the strain energy density of the beam will be at a maximum and the beam will accordingly display negative stiffness. To date, physical realization of these structures has been limited due to geometries that are difficult to construct and refine with conventional manufacturing materials and methods. By utilizing the geometric freedoms allowed by the Selective Laser Sintering (SLS) machines, these structures can be built and tuned for specific dynamic properties.
The objective of this research was to investigate the dynamic behavior of SLS-constructed meso-scale negative stiffness elements with the future intention of miniaturizing the elements to create highly absorptive meta-materials. This objective was accomplished first through the development and analysis of a mathematical model of the buckled beam system. A characterization of the Nylon 11 material was performed to obtain the material properties for the parts that were created using SLS. Applying the mathematical model and material properties, a tuned meso-scale negative stiffness structure was fabricated. Transmissibility tests of the meso-scale structure revealed that the constrained negative stiffness system was able to achieve overall higher damping and vibration isolation than an unconstrained system. Quasistatic behavior of the system indicated that these elements would be ideal for implementation within meta-materials. Based on the results of the meso-scale system, a method to test a representative volume element for a negative stiffness meta-material was developed for future completion. / text
|
3 |
Decoupling and Evaluation of Multiple Antenna Systems in Compact MIMO TerminalsLi, Hui January 2012 (has links)
Research on multiple antenna systems has been a hot topic in recent years due to the demands for higher transmission rate and more reliable link in rich scattering environment in wireless communications. Using multiple antennas at both the transmitter side and the receiver side increases the channel capacity without additional frequency spectrum and transmitted power. However, due to the limited space at the size-limited terminal devices, the most critical problem in designing multiple antennas is the severe mutual coupling among them. The aim of this thesis is to provide compact, decoupled and efficient multiple antenna designs for terminal devices. At the same time, we propose a simple and cost effective method in multiple antenna measurement. All these efforts contribute to the development of terminal devices for the fourth generation wireless communication. The background and theory of multiple antenna systems are introduced first, in which three operating schemes of multiple antenna systems are discussed. Critical factors influencing the performance of multiple antenna systems are also analyzed in details. To design efficient multiple antenna systems in compact terminals, several decoupling methods, including defected ground plane, current localization, orthogonal polarization and decoupling networks, are proposed. The working mechanism and design procedure of each method are introduced, and their effectiveness is compared. Those methods can be applied to most of the terminal antennas, reducing the mutual coupling by at least 6dB. In some special cases, especially for low frequency bands below 1GHz, the chassis of the device itself radiates like an antenna, which complicates the antenna decoupling. Thus, we extend the general decoupling methods to the cases when the chassis is excited. Based on the characteristic mode analysis, three different solutions are provided, i.e., optimizing antenna locations, localizing antenna currents and creating orthogonal modes. These methods are applied to mobile phones, providing a more reliable link and a higher transmission rate, which are evaluated by diversity gain and channel capacity, respectively. In order to measure the performance of multiple antenna systems, it is necessary to obtain the correlation coefficients. However, the traditional measurement technique, which requires the phase and polarization information of the radiation patterns, is very expensive and time consuming. In this thesis, a more practical and convenient method is proposed. Fairly good accuracy is achieved when it is applied to various kinds of antennas. To design a compact and efficient multiple antenna system, besides the reduction of mutual coupling, the performance of each single antenna is also important. The techniques for antenna reconfiguration are demonstrated. Frequency and pattern reconfigurable antennas are constructed, providing more flexibility to multiple antenna systems. / QC 20120604
|
4 |
A Fundamental Model Methodology for the Analysis, Design and Fabrication of a Narrow Transparency Window in a Bulk Meta-MaterialJanuary 2017 (has links)
abstract: The optical valley of water, where water is transparent only in the visible range, is a fascinating phenomenon and cannot be modeled by conventional dielectric material modeling. While dielectric properties of materials can be modeled as a sum of Lorentz or Debye simple harmonic oscillators, water is the exception. In 1992 Diaz and Alexopoulos published a causal and passive circuit model that predicted the window of water by adding a “zero shunt” circuit in parallel with every Debye and Lorentz circuit branch. Other than the Diaz model, extensive literature survey yielded no universal dielectric material model that included water or offered an explanation for this window phenomenon. A hybrid phenomenological model of water, proposed by Shubitidze and Osterberg, was the only model other than the Diaz-Alexopoulos model that tried to predict and match the optical valley of water. However, we show that when we apply the requirement that the permittivity function must be a complex analytic function, it fails our test of causality and the model terms lack physical meaning, exhibiting various mathematical and physical contradictions. Left with only the Diaz proposed fundamental model as the only casual model, this dissertation explores its physical implications. Specifically, the theoretical prescription of Kyriazidou et al for creating artificial dielectric materials with a narrow band transparency is experimentally demonstrated for the first time at radiofrequencies. It is proposed that the most general component of the model of the frequency dependent permittivity of materials is not the simple harmonic oscillator but rather the harmonic oscillator augmented by the presence of a zero shunt circuit. The experimental demonstration illustrates the synthesis and design of a new generation of window materials based on that model. Physically realizable Lorentz coatings and RF Debye “molecules” for creating the desired windows material are designed using the full physics computational electromagnetic code. The prescribed material is then implemented in printed circuit board technology combined with composite manufacturing to successfully fabricate a lab demonstrator that exhibits a narrow RF window at a preselected frequency of interest. Demonstrator test data shows good agreement with HFSS predictions. / Dissertation/Thesis / Doctoral Dissertation Materials Science and Engineering 2017
|
Page generated in 0.1144 seconds