The studies in this dissertation mainly utilize planar antennas for ultra-wideband antenna designs not only on the investigation of antenna performance but also towards exploiting attractive features of ultra-wideband antennas for practical applications, such as WMAN access-point antennas, omnidirectional WiMAX access-point antennas, band-notched UWB (Ultra-wideband, 3.1 ~ 10.6 GHz) antennas, and so on. To begin with, the effects of the ground-plane size and the asymmetrical ground plane on ultra-wideband antennas are studied in Chapter 2. Following up, from the conclusive results, an antenna for WMAN operation in access-point applications and an omnidirectional monopole for USB wireless network card device are proposed and analyzed. Characteristics of ultra-wideband antenna radiation in relation to the antenna's width for obtaining omnidirectional radiation are addressed. In Chapter 3, several ultra-wideband access-point antennas are presented for achieving good omnidirectional radiation in the azimuthal plane across the bandwidth. Furthermore, in Chapter 4, band-notching techniques are applied to ultra-wideband antennas for avoiding the interference between the UWB and the WLAN systems.

The proposed golf resort is situated near the village of Nevcehle in the sloping terrain. It is a brick building of concrete blocks with contact thermal insulation and with concrete floor structure. The building has two floors. House is based on plain concrete foundations. Roof is made up of metal plate-connected timber truss with metal roofing.

This project deals with increasing efficiency of one phase induction motor with permanent split capacitor. We can whole thesis divide into two parts, the first one is basic and the second is interested in analysis and measurement. First part handles with construction of single phase induction motor, explanation of function principle, start and run of motor. Calculating of efficiency including type of losses, which reduce efficiency. Second part concerns analysis losses including moment load characteristic, motor measurement while rotor is locked, with no load operation, measuring mechanical and additional losses. Further there will be measured useful values for creation model for simulation (reactance of windings etc.). Than will be the model created in ANSYS Maxwell with module RMxprt. After analytic calculation in RMxprt and using Finite Element Method (FEM) load characteristics will be compared together. This comparison gives us information about accuracy of model for simulation. Simulation and measurement will be carried out on another engine with high quality ferromagnetic material used for magnetic circuit of motor. Further will be done simulation of motor with modifications shown in previous chapter for high efficiency.

Master’s thesis deals with complete project documentation of newly built object of library and mediatheque located on the site in České Budějovice. It is a three-storey building divided into three parts, one-storey, two-storey and three-storey. It is partly basement. The underground part is devoted to main storage spaces of library services, management offices and social facilities for staff (toilets, changing rooms, washrooms). This part of the building has own entrance for employees. In the 1st floor is located the main library area along with exhibition spaces and the main entrance for visitors with self service cloakroom. In the 2nd floor are designed library spaces for visually impaired persons with fund of audio books, CDs and DVDs, a lecture hall with a projector and own kitchen and space for reading magazines and periodicals. From this floor is possible access to the outdoor terrace, which has own terrace furniture store nearby. In the 3rd floor is located a literary café with its own facilities. In each floor are also designed sanitary facilities for use by persons with limited ability of movement and orientation. All floors are connected by stairs and passenger lifts. In terms of construction, the building is designed as a frame, in the underground parts made of reinforced concrete, the overhead of glued laminated timber elements. The ceiling structure designed over the underground floor is monolithic reinforced concrete slab. The ceilings in the upper part are designed as a wooden beamed made of the glued laminated timber elements. The building has a pent roof created by wooden trusses assembled with punched metal plate fasteners. The foundations are designed as belts and footings. The study, detailed documentation, thermal-technical evaluation of selected structures and fire safety of the building are processed. For processing of the thesis were used software AutoCAD 2010, Teplo 2011, Area 2011, Ztráty 2011 and Fire NX 802 PRO.