Spelling suggestions: "subject:"metallurgy anda datenmaterial bcience."" "subject:"metallurgy anda datenmaterial escience.""
1 |
Crevice corrosion resistances of new high strength cobalt-chromium-molybdenum-carbon alloysDevine, Thomas Maurice January 1974 (has links)
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Metallurgy and Material Science, 1974. / MICROFICHE COPY AVAILABLE IN ARCHIVES AND SCIENCE. / Vita. Bibliography: leaves 56-59. / by Thomas Maurice Devine, Jr. / Ph.D.
|
2 |
Diffusion-Controlled Oxidation of Binary Alloys with Special Reference to Nickel-Iron AlloysDalvi, Ashok Dattatraya 01 1900 (has links)
<p> This investigation is concerned with the development of a general ternary diffusion analysis for the diffusion-controlled oxidation of binary alloys based on the concept of local equilibrium and phenomenological diffusion theory and its application to appropriate experimental systems. </p> <p> The theoretical analysis is in two parts. In the first part diffusion equations for the alloy and oxide phases are obtained and tested against experiments for Ni-10.9% Co alloy at 1000°C. In the second part phenomena observed in binary alloy oxidation such as supersaturation, internal oxidation and morphological instability are qualitatively discussed and the concept ot the stationary diffusion path on the isotherm is applied to binary alloy oxidation. In general the ternary diffusion analysis satisfactorily accounts for the diffusion-controlled oxidation properties of several binary alloys. </p> <p> An experimental investigation of the oxidation of nickel-iron alloys at 1000°C is described. In the first part of the experimental investigation, thermodynamics of the ternary iron-nickel-oxygen system at 1000°C has been investigated in support of the oxidation studies. The second part is comprised of a detailed kinetic and metallographic study of nickel-iron alloys containing upto 25% iron exposed to oxygen atmospheres at 1000°C and determination of the metal concentration profiles in the oxide and alloy phases. The experimental results for these alloys are in good agreement with the theoretical calculations. </p> / Thesis / Doctor of Philosophy (PhD)
|
3 |
Vanadium-Oxygen Interactions in Liquid Iron and the Kinetics of Phosphorus Transfer in Slag/Metal SystemsKershaw, Paul 09 1900 (has links)
<p> Iron-vanadium alloys were levitation melted and equilibrated at controlled temperatures with water vapour/hydrogen atmospheres of controlled composition, quenched and analysed for oxygen. The effect of vanadium on the behaviour of oxygen has been expressed in terms of first order free energy, enthalpy and entropy interaction parameters. </p> <p> The reduction of phosphorus from synthetic blast furnace slags by carbon saturated iron was studied under laboratory conditions. The rate of phosphorus transfer was determined and the results have been interpreted in terms of chemical reaction control at the slag/metal interface. </p> <p> The dephosphorisation of induction melted mild steel by synthetic basic slags was investigated. The rate of dephosphorisation was determined and the results have been interpreted in terms of mass transfer control in the slag phase. </p> / Thesis / Doctor of Philosophy (PhD)
|
Page generated in 0.1084 seconds