Thesis (Ph. D.)--University of Chicago, 1918. / "Private edition, distributed by the University of Chicago libraries." "References": p. 13. Also available on the Internet.

Thesis (Ph. D.)--University of Chicago, 1918. / "Private edition, distributed by the University of Chicago libraries." eContent provider-neutral record in process. Description based on print version record. "References": p. 13.

Thesis (Ph. D.)--University of Chicago, 1918. / "Private edition, distributed by the University of Chicago libraries." "References": p. 13.

No / The performance of batch reactive distillation process involving the esterification of acetic acid with methanol to produce methyl acetate and water is considered in this work. Two cases studies with varying amount of the reactants are considered. The reflux ratio (single time interval) is selected as the control variable to be optimised (treated as piecewise constant) for different but fixed batch time ranging from 5 to 15 h, so as to maximise the conversion of methanol subject to product purity of methyl acetate. The dynamic optimisation problem is converted to a nonlinear programming problem by Control Vector Parameterization (CVP) technique and is solved by using efficient SQP method. The optimisation results show that as the methanol and methyl acetate are wide boiling, the separation of methyl acetate is easier without losing much of methanol reactant. The conversion improves by 6.4 % due to sufficient amount of acetic acid being reacted with methanol. Moreover an excess of acetic acid leads to high operation temperature and therefore high reflux operation (to reduce loss of methanol from the top of the column) to maximise the conversion.

Reaction rate data at 50oC was generated in a batch reactor over a wide range of initial concentrations in the reaction mixture. In each case the reaction was allowed to reach equilibrium. Equilibrium conversion data clearly indicated that it is important to consider the non-ideality of the system. The NRTL activity model proved to be the most suitable model to calculate the activity based equilibrium constant, as the percentage standard deviation of the equilibrium constant calculated in this manner was only 7.6% for all the different experiments as opposed to 17.8% when the equilibrium constant was based on concentration. The NRTL parameters used were obtained from Gmehling&Onken (1977) who determined the parameters from vapour liquid equilibrium. The Langmuir-Hinshelwood kinetics proposed by Song et al. (1998) and Pöpken et al. (2000) provided an excellent representation of the reaction rate over a wide concentration range with an AARE of 6% and 5% respectively. It was shown that when the NRTL activities were used in the rate expression that a power law model provided a similarly accurate prediction of the reaction rate (AARE = 4.1%). When the Eley-Rideal reaction expression (in terms of the adsorption of methanol and water) was used, a slight improvement was achieved (AARE = 2.4%). As both the Langmuir-Hinshelwood and Eley-Rideal models require separate experiments for the measurement of adsorption constants, it seems that the activity based power law model should be the kinetic expression of choice. It can be concluded that a two parameter activity based rate expression predicts the reaction rate with similar accuracy as the multi-parameter adsorption models. This indicates that it is not necessary to know the concentration on the resin surface (adsorption models) or in the resin gel (absorption models) when describing the reaction rate as long as the bulk liquid phase activities can be adequately described. / Dissertation (MEng (Chemical Engineering))--University of Pretoria, 2007. / Chemical Engineering / unrestricted

Values of the rate constant for the alkaline hydrolysis of methyl acetate in various aqueous-organic solvent mixtures (dimethyl sulfoxide 0<x40.2, dioxane 0 <, x., < 0.2, methyl ethyl ketone 0<x<0.06 and diglyme, i. e. ether-bis (2-methyloxethyl) 0x<0.10) have been determined for the temperatures 15 0 C, 25 0C and 35 0C conductometrically. To interpret these results the approach adapted is to experimentally determine the activity coefficient of the ester (YE ) and the activity of the water (aH20', mechanistically, at least one molecule of water is involved in the rate-determining step) and then to use the Bronsted-Bjerrum equation to determine the residual activity coefficient ratio of the participating ions, y (Yf - for Oil the transition state). Values of YE and aH 20 have been determined by a transpiration method, using gas-chromatographic analysis of the vapours of solutions of methyl acetate in aqueous-organic solvent mixtures of dir. ethyl sulfoxide, dioxane, methyl ethyl ketone and diglyme in the same composition ranges as above, tetrahydrofuran 04x org z<, 0.15, methanol, ethanol and tert-butanol in t1h6e range 04x0.20'at 25oC. These results indicate that on changing org the solvent composition YE varies by a larger factor than is predicted for the ratio YOH-/yýO_ by the Debye-Iluckel approach, and hence is the dominant factor in determining the effects of solvent composition on the rates of the hydrolysis. This is in contradiction to the assumptions of the electrostatic theories of Laidler and Eyring, and of Amis and Jaffe. The gas-chromatographic results also indicate that whilst the concentration of the water varies in each mixture studied, the activity coefficient varies in the opposite way to produce almost constant values of aý, 0* Using the transpiratioii/gas-chromatogralýlic method, the thermodynamic properties of the ternary systems, methyl acetate-water-organic Solvcat, using the organic solvents mentioned above (excepting, diglyme) have been investigated, and the results indicate that the variation of *ýE with solvent composition, for the dilute solutions of ester used, can be estimated from the thermodynamic properties of the binary water-organic solvent mixtures, using the Gibbs-Dahem equation. Single ion activity coefficients in the literature for small negative ions, to represent the OH_ ion, and for large ions, to rep-resent the transition state ion, have been used to explain the experimentally fomd variation of the residual activity coefficient -ratio with solvent composition. Hence, it is concluded that the importance of the parameters involved in the hydrolysis of esters - an ion-molecule reaction - in aqueousorganic solvent mixtures are in the order of Ymolecule > aH 20> YOH_/YM+ -> (dielectric constant), and that the nonelectrostatic effects -- thermodynamic effects - are more important in these studies than the electrostatic effects. From a preliminary investigation of the data in the literature the thermodynamic approach also yields a valid interpretation of the effect of solvent composition on the rates of the acid hydrolysis of esters.

Values of the rate constant for the alkaline hydrolysis of methyl acetate in various aqueous-organic solvent mixtures (dimethyl sulfoxide 0<x40.2, dioxane 0 <, x., < 0.2, methyl ethyl ketone 0<x<0.06 and diglyme, i. e. ether-bis (2-methyloxethyl) 0x<0.10) have been determined for the temperatures 15 0 C, 25 0C and 35 0C conductometrically. To interpret these results the approach adapted is to experimentally determine the activity coefficient of the ester (YE ) and the activity of the water (aH20', mechanistically, at least one molecule of water is involved in the rate-determining step) and then to use the Bronsted-Bjerrum equation to determine the residual activity coefficient ratio of the participating ions, y (Yf - for Oil the transition state). Values of YE and aH 20 have been determined by a transpiration method, using gas-chromatographic analysis of the vapours of solutions of methyl acetate in aqueous-organic solvent mixtures of dir. ethyl sulfoxide, dioxane, methyl ethyl ketone and diglyme in the same composition ranges as above, tetrahydrofuran 04x org z<, 0.15, methanol, ethanol and tert-butanol in t1h6e range 04x0.20'at 25oC. These results indicate that on changing org the solvent composition YE varies by a larger factor than is predicted for the ratio YOH-/yýO_ by the Debye-Iluckel approach, and hence is the dominant factor in determining the effects of solvent composition on the rates of the hydrolysis. This is in contradiction to the assumptions of the electrostatic theories of Laidler and Eyring, and of Amis and Jaffe. The gas-chromatographic results also indicate that whilst the concentration of the water varies in each mixture studied, the activity coefficient varies in the opposite way to produce almost constant values of aý, 0* Using the transpiratioii/gas-chromatogralýlic method, the thermodynamic properties of the ternary systems, methyl acetate-water-organic Solvcat, using the organic solvents mentioned above (excepting, diglyme) have been investigated, and the results indicate that the variation of *ýE with solvent composition, for the dilute solutions of ester used, can be estimated from the thermodynamic properties of the binary water-organic solvent mixtures, using the Gibbs-Dahem equation. Single ion activity coefficients in the literature for small negative ions, to represent the OH_ ion, and for large ions, to rep-resent the transition state ion, have been used to explain the experimentally fomd variation of the residual activity coefficient -ratio with solvent composition. Hence, it is concluded that the importance of the parameters involved in the hydrolysis of esters - an ion-molecule reaction - in aqueousorganic solvent mixtures are in the order of Ymolecule > aH 20> YOH_/YM+ -> (dielectric constant), and that the nonelectrostatic effects -- thermodynamic effects - are more important in these studies than the electrostatic effects. From a preliminary investigation of the data in the literature the thermodynamic approach also yields a valid interpretation of the effect of solvent composition on the rates of the acid hydrolysis of esters. / Ministry of Science and Higher Education of Iran