Spelling suggestions: "subject:"icroscopy, electron, scanning"" "subject:"amicroscopy, electron, scanning""
41 |
Bone regeneration in novel porous titanium implantsKhouja, Naseeba, 1981- January 2010 (has links)
Indiana University-Purdue University Indianapolis (IUPUI) / The objective of this study was to evaluate the in vivo performance of the novel
press-fit dental implant fabricated via electron beam melting (EBM, Southern Methodist
Univ.) and compare it to a commercially-available porous-coated press-fit dental implant
(Endopore, Innova Corp.).
Twelve cylindrical shaped implants 3 mm in diameter x 5 mm long were made by
EBM (Southern Methodist Univ.) using Ti6Al4V ELI alloy. Twelve commercial
implants (Endopore, Innova Corp.) of the same geometry were used as controls. Samples
were implanted in rabbit tibia and retrieved six weeks postoperatively. Six specimens from each implant type were embedded undecalcified, sectioned, and stained with
toluidine blue (Sigma) for histomorphometry analysis. Bone-to-implant contact (BIC)
was measured. On the six remaining samples from each implant type, the mechanical
properties were evaluated by pushout test on a material testing machine. The samples
were loaded at a loading rate of 1 mm/min. The pushout strength was measured and the
apparent shear stiffness was calculated. The results were analyzed with a paired-t test.
The histology shows osteointegration of surrounding bone with both implant
types. Bone was found to grow into the porous space between the beads. Both the
Endopore (Innova Corp.) and the EBM (Southern Methodist Univ.) showed similar BIC.
The mean BIC for the Endopore (Innova Corp.) and EBM (Southern Methodist Univ.)
implant were 35 ± 6% and 32 ± 9%, respectively. It failed to reach statistical significance
(p > 0.05). The peak pushout force for Endopore (Innova Corp.) and EBM (Southern
Methodist Univ.) implants were 198.80 ± 61.29 N and 243.21 ± 69.75 N, respectively.
The apparent shear stiffness between bone and implant for the Endopore (Innova Corp.)
and EBM (Southern Methodist Univ.) implants were 577.36 ± 129.99 N/mm; and 584.48
± 146.63 N/mm, respectively. Neither the peak pushout force nor the apparent shear
stiffness of the implants was statistically different between the two groups (p > 0.05).
The results suggest that the implants manufactured by EBM (Southern Methodist Univ.)
perform equally well as the commercial implant Endopore (Innova Corp.) in this current
animal model.
|
42 |
Endodontski retretman-analiza skening elektronskom mikroskopijom / Endodontic retreatment –scanning electron microscopy analysisVukoje Karolina 09 December 2015 (has links)
<p>U slučajevima neuspešne endodontske terapije, neophodno je ponovno lečenje kanala korena. Ortogradni endodontski retretman podrazumeva uklanjanje postojećeg materijala za punjenje iz kanala uz dodatno čišćenje, dezinfekciju i ponovnu finalnu opturaciju kanala. Važan korak u toku retretmana je što potpunije uklanjanje postojećeg kanalnog punjenja kako bi se pristupilo svim delovima kanalnog sistema. Cilj doktorske teze bio je da se ispita kvalitet čisšćenja zidova kanala korena nakon endodontskog retretmana pomoću skening elektronske mikroskopije (SEM). Posmatran je uticaj vrste materijala za opturaciju, uticaj upotrebe rastvarača i uticaj ručnih i mašinskih instrumenata na količinu zaostalog materijala na zidovima kanala. Takođe, ispitan je uticaj ovih faktora na apikalnu transportaciju materijala i na vreme potrebno za retretman, a utvrđena je i učestalost oštećenja korišćenih instrumenata. Materijal i metode: Ukupan uzorak činilo je 125 ekstrahovanih, humanih jednokorenih zuba. Nakon preparacije kanala korena, 120 zuba je podeljeno u dve grupe i napunjeno pomoću dva različita materijala za opturaciju (gutaperkom i resilonom). U zavisnosti od tehnike uklanjanja ovih materijala, grupe su dalje podeljene u odnosu na korišćene instrumente (Hedstrom, ProTaper i Twisted File) i u odnosu na upotrebu rastvarača (sa i bez hloroforma). Preostalih 5 zuba, bez kanalnog punjenja, korišćeni su kao kontrolna grupa. Nakon završenog retretmana, korenovi su uzdužnim cepanjem razdvojeni, a odabrane polovine posmatrane na SEM-u. Mikrofotografije svake trećine kanala načinjene su pri uveličanju od 500x. Količina preostalog materijala za punjenje ocenjivana je pomoću skale. Otvoreni dentinski kanalići prebrojavani su na mikrofotografijama načinjenim pri uveličanju od 1000x, u odnosu na uvek konstantnu površinu. Rezultati: Analiza rezultata ukazala je na postojanje statistički značajne razlike u kvalitetu čišćenja zidova kanala u zavisnosti od uklanjanog materijala za opturaciju. Kvalitet čišćenja zidova kanala bio je veći nakon uklanjanja gutaperke nego nakon uklanjanja resilona. Rotirajućim, mašinskim instrumentima je efikasnije uklanjana gutaperka, a ručnim Hedstrom turpijama je bolje uklanjan resilon. Posmatrajući ceo uzorak, ProTaper instrumenti ostavljali su velike količine materijala na zidovima kanala nakon endodontskog retretmana. Međutim, uklanjanje materijala pomoću ovih instrumenata bilo je najbrže. Primena rastvarača značajno je doprinela bržem uklanjanju materijala, dok uticaj na kvalitet čišćenja zidova kanala nije bio značajan. Posmatrajući kanal korena po trećinama, najveća količina materijala nalazila se u apikalnoj trećini, bez obzira na vrstu uklanjanog materijala i korišćenih instrumenata, i bez obzira na upotrebu rastvarača tokom retretmana. Učestalost oštećenja instrumenata bila je značajno veća prilikom upotrebe Twisted File instrumenata. Apikalna transportacija materijala je bila veća tokom uklanjanja resilon materijala i kada su korišćene ručne Hedstrom turpije. Zaključak: Kvalitet čišćenja zidova kanala nakon uklanjanja gutaperke je veći nego nakon uklanjanja resilona. Dizajn i vrsta instrumenata utiče na kvalitet čišćenja zidova kanala korena. Upotreba rastvarača tokom retretmana ne utiče značajno na smanjenje količine materijala zaostalog na zidovima kanala. Mašinski pokretani instrumenti i upotreba rastvarača značajno skraćuju vreme potrebno za endodontski retretman.</p> / <p>In cases when endodontic treatment fails, it is necessary to retreat the root canal. Orthograde endodontic retreatment requires the removal of the existing root filling material with additional cleaning, disinfection and refilling of the canal. An important step during retreatment is complete removal of existing filling materials, to regain access to all parts of the canal system. The aim of the doctoral thesis was to investigate the cleanliness of root canal walls after removal of two different obturation material. The retreatment efficacy was observed depending on the usage of solvent and different hand or rotary instruments. The amount of residual material on the canal walls was assessed using scanning electron microscopy (SEM). Also, apical transportation of the obturation material, working time and frequency of instrument damage during retreatment was recorded. Materials and Methods: The total sample consisted of 125 extracted, single-rooted human teeth. After root canal preparation, 120 teeth were divided in two groups and filled using two different obturation materials (gutta-percha and resilon). Depending on the technique of removing these materials, the groups were further divided, in relation to the used instruments (Hedstrom, ProTaper and Twisted File), as well as in relation to the use of solvent (with or without chloroform). The remaining 5 tooth without canal filling were used as a control group. After root canal desopturation, the longitudinaly splitted root halves were observed on SEM. Microphotography of each third were made at magnification of 500x. The amount of remaining filling material was evaluated by using a scale. Open dentinal tubules were counted on microphotographies made at a magnificiation of 1000x, on a surface that was always constant. Results: Analysis of the results indicated a significant difference in the cleanliness of the canal walls depending on the used obturation material. Cleanliness of the canal walls was higher after gutta-percha removal than after the removal of resilon. Rotary instruments were more effective in removing gutta-percha and Hedstrom hand files better removed resilon. ProTaper instruments left more residual material on canal walls, however endodontic retreatment with these instruments was the fastest. The application of solvent significantly contributed to faster material removal, while the impact on the increase of canal cleanliness was not significant. The largest amount of material remained in the apical third, regardless of the type of material removed and instruments used, and also regardless whether solvent was used for retreatment. The frequency of instrument deformation and fracture was significantly higher when Twisted File instruments were used. Apical transportation of material had a significantly higher occurrence during resilon removal and when manual Hedstrom files were used. Conclusion: Cleanliness of the canal walls was higher after the removal of gutta-percha than after the removal of resilon. The use of solvent is not significant on the increase of canal wall cleanliness, but significantly shortens the time needed for retreatment. There is a difference in the cleanliness of root canal walls depending on the used instruments. Engine-driven rotary instruments and the use of a solvent significantly shortens the time needed for endodontic retreatment.</p>
|
43 |
Reološka svojstva endodontskih silera / Rheological properties of endodontic sealersPremović Milica 09 December 2016 (has links)
<p>Uvod: Sistem kanala korena je složena celina koja pored glavnog korenskog kanala sadrži brojne lateralne, sekundarne, akcesorne kanale, apikalne istmuse i delte, kao i razgranatu mrežu dentinskih tubula. Kako korensko kanalni sistem ne može biti u potpunosti očišćen i dezinfikovan postojećim tehnikama instrumentacije, irigacije i intrakanalne medikacije, uloga kanalnog punjenja se ogleda u postizanju trodimenzionalne opturacije kanalnog prostora, ”pečaćenju” preostalih bakterija i onemogućavanju njihovog prodora u periradikularna tkiva. Ispitivanjem reoloških svojstava mogu se bliže odrediti karakteristike tečenja i viskoelastična svojstva endodontskih materijala. Definisanje i razumevanje reoloških svojstava endodontskih silera u različitim uslovima doprinosi pravilnom rukovanju materijalom shodno primenjenoj tehnici opturacije. Cilj istraživanja: ispitivanje viskoelastičnih svojstava tri različita endodontska silera, uključujući i tečenje / prodor silera u dentinske tubule u kombinaciji sa različitim tehnikama opturacije. Materijal i metode: Ukupan uzorak činilo je 132 meziobukalna i meziolingvalna kanala korena prvih donjih molara. Nakon preparacije kanala krunično-apeksnom tehnikom i ProTaper endodontskim instrumentima, uzorak je podeljen u tri grupe u zavisnosti od ispitivanog silera (AH Plus, Sealapex i EndoREZ) i dodatno u četiri podgrupe shodno primenjenoj tehnici opturacije (hladna lateralna kompakcija, monokona tehnika, opturacija sa čvrstim nosačem gutaperke i topla vertikalna kompakcija), što je činilo ukupno 12 grupa po 11 kanala. Nakon opturacije, uzorci su poprečno presečeni na rastojanju 3, 5 i 8mm od anatomskog foramena, kako bi se dobili preseci koji odgovaraju apikalnoj, srednjoj i koronarnoj trećini kanala. Koronarne površine preseka su analizirane skening elektronskim mikroskopom (SEM). Mesto najdubljeg tubularnog prodora silera je izmereno i izraženo u mikrometrima i procentualno u odnosu na ukupno rastojanje dentinski zid kanala - spoljašnja površina korena. Viskoelastična svojstva endodontskih silera su ispitana na dinamičkom oscilatornom reometru, frequency sweep testom, na četiri različite temperature: 25°C, 35°C, 40°C i 65°C. Rezultati: Tehnike opturacije silerom AH Plus koje primenjuju toplotu i pritisak daju značajno višu dubinu prodora silera u dentinske tubule u odnosu na tehnike koje ne primenjuju. Primena toplote i pritiska tokom opturacije silerom Sealapex nema značajnu ulogu u dubini prodora silera u dentinske tubule. Tehnike opturacije silerom EndoREZ koje ne primenjuju toplotu i pritisak daju značajno višu dubinu prodora silera u dentinske tubule u odnosu na tehnike koje primenjuju. Dubina prodora sva tri ispitivana endodontska silera u dentinske tubule je najviša u koronarnoj trećini, zatim srednjoj i značajno je niža u apikalnoj trećini kanala korena. AH Plus, Sealapex i EndoREZ ispoljavaju viskoelastični karakter sa dominantnim vrednostima elastičnog modula u odnosu na vrednosti viskoznog modula, na svim zadatim temperaturama, u opsegu primenjenih frekvencija i napona smicanja. Kompleksni viskozitet svih ispitivanih silera opada sa porastom frekvencije, na svim zadatim temperaturama. Sa porastom temperature kompleksni viskozitet silera AH Plus opada, dok za silere Sealapex i EndoREZ raste. Korelacionom analizom ustanovljena je jaka negativna korelacija između kompleksnog viskoziteta ispitivanih silera i dubine prodora u dentinske tubule: opadanjem kompleksnog viskoziteta dubina prodora silera u dentinske tubule raste. Zaključak: Odabir endodontskog silera treba da je zasnovan na tehnici opturacije koja se primenjuje.</p> / <p>Introduction: The root canal system has a complex anatomy with main root canal and many lateral, secondary, accessory canals, apical isthmuses and deltas, as well as numerous branched dentinal tubules. Due to its complexity, the root canal system cannot be completely cleaned, shaped and disinfected using available techniques of instrumentation, irrigation and intracanal medication. The aim of root canal filling is to achieve a three-dimensional obturation of the root canal space, entomb residual bacteria and prevent their penetration into the periradicular tissue. Defining and understanding the rheological properties of endodontic sealers in different conditions contributes to the proper handling of the material according to the obturation technique applied. The aim: testing the viscoelastic properties of three different endodontic sealers, including the flow / sealer penetration into dentinal tubules in combination with different obturation techniques. Materials and Methods: The total sample consisted of 132 mesiobuccal and mesiolingual root canals of first mandibular molars. After root canal preparation using ProTaper endodontic instruments, in crown-down manner, the sample is divided into three groups depending on the tested sealers (AH Plus, Sealapex and EndoREZ) and additionally into four subgroups according to the obturation technique applied (cold lateral compaction, single-cone technique, carrier – based obturation and warm vertical compaction), making a total of 12 groups of 11 canals. After root canal obturation, the samples were sectioned horizontally at 3, 5 and 8mm from the anatomical foramen, in order to get the sections that correspond to the apical, middle and coronary third of the canal. The coronal surfaces of the sections were analyzed using scanning electron microscopy (SEM). The maximum depth of sealer penetration was measured and expressed in micrometers and as a percent of the total distance: canal dentinal wall - the outer surface of the root. The viscoelastic properties of endodontic sealers were measured using frequency sweep test on dynamic oscillatory rheometer, at four different temperatures: 25°C, 35°C, 40°C and 65°C. Results: Obturation techniques with AH Plus that applied heat and pressure produced a significantly higher depth of sealer penetration into dentinal tubules as compared to techniques that did not apply. The application of heat and pressure during obturation with Sealapex had no a significant role in the depth of sealer penetration into dentinal tubules. Obturation techniques with EndoREZ that did not apply heat and pressure produced a significantly higher depth of sealer penetration into dentinal tubules as compared to techniques that applied. The depth of penetration of all three endodontic sealers into dentinal tubules was the highest in the coronary third, followed by the second and was significantly lower in the apical third of the root canal. AH Plus, Sealapex and EndoREZ exhibited viscoelastic character with dominant values of elastic over viscous modulus, at all specified temperatures, in the range of applied frequencies and shear stresses. Complex viscosity of all sealers decreased as the frequency increased at all temperatures. AH Plus showed decreased viscosity as the temperature increased, while Sealapex and EndoREZ demonstrated opposite behavior. Correlation analysis has established a strong negative correlation between the complex viscosity of the tested sealers and the depth of penetration into dentinal tubules: the decrease of complex viscosity increase the depth of sealer penetration into dentinal tubules. Conclusion: The choice of endodontic sealer should be based on the obturation technique applied.</p>
|
44 |
Effect of simulated intraoral erosion and/or abrasion effects on etch-and-rinse bonding to enamel.Wang, Linda, Casas-Apayco, Leslie, Hipólito, Ana Carolina, Dreibi, Vanessa Manzini, Giacomini, Marina Ciccone, Bim Júnior, Odair, Rios, Daniela, Magalhães, Ana Carolina 02 1900 (has links)
El texto completo de este trabajo no está disponible en el Repositorio Académico UPC por
restricciones de la casa editorial donde ha sido publicado. / PURPOSE: To assess the influence of simulated oral erosive/abrasive challenges on the bond strength of an etch-and-rinse two-step bonding system to enamel using an in situ/ex vivo protocol. METHODS: Bovine enamel blocks were prepared and randomly assigned to four groups: CONT - control (no challenge), ABR - 3x/day-1 minute toothbrushing; ERO - 3x/day - 5 minutes extraoral immersion into regular Coca Cola; and ERO+ABR - erosive protocol followed by a 1-minute toothbrushing. Eight blocks were placed into an acrylic palatal appliance for each volunteer (n = 13), who wore the appliance for 5 days. Two blocks were subjected to each of the four challenges. Subsequently, all the blocks were washed with tap water and Adper Single Bond 2/Filtek Z350 were placed. After 24 hours, 1 mm2 beams were obtained from each block to be tested with the microtensile bond strength test (50 N load at 0.5 mm/minute). The data were statistically analyzed by one-way RM-ANOVA and Tukey's tests (alpha = 0.05). RESULTS: No difference was detected among the ABR, ERO, and CONT groups (P > 0.05). ERO+ABR group yielded lower bond strengths than either the ABR and ERO groups (P < 0.0113). / Revisión por pares
|
45 |
Biokompatibilnost i marginalna adaptacija mineral-trioksid agregata, trikalcijum-silikatnog cementa i amalgama kao materijala za retrogradno zatvaranje kanala korena zuba / Biocompatibility and marginal adaptation of mineral trioxide aggregate, tricalcium silicate cement and dental amalgam as a root end filling materialsJovanović Lena 25 October 2019 (has links)
<p>Već izvesno vreme u stručnoj literaturi vodi se rasprava o biokompatibilnosti materijala koji se koriste u periapikalnoj hirurgiji. Pored biokompatibilnosti, od materijala za retrogradnu opturaciju kanala korena zuba se očekuje da spreči prodor bakterija iz kanalnog sistema u okolna tkiva. Kvalitetno rubno zaptivanje, odnosno adekvatna marginalna adaptacija su među najznačajnijim faktorima za dugoročan uspeh tretmana. Cilj ovog istraživanja je bio ispitati biokompatibilnost i utvrditi da li postoji razlika u biokompatibilnosti između mineral-trioksid agregata, trikalcijum-silikatnog cementa i amalgama na osnovu tri standadna testa citotoksičnosti, kao i utvrditi marginalnu adaptaciju ispitivanih materijala za retrogradno zatvaranje kanala korena zuba. Materijali i metode: Eksperimentalni deo istraživanja je podeljen na dva dela. U prvom delu istraživanja je vršeno ispitivanje biokompatibilnosti materijala, dok je u drugom delu vršeno ispitivanje marginalne adaptacije na osnovu mikrofotografija dobijenih skening elektronskim mikroskopom. Ispitivanje biokompatibilnosti je izvršeno na dve ćelijske linije, liniji mišjih fibroblasta (L929) i liniji humanih fibroblasta (MRC-5). U eksperimentima su korišćene samo žive (vijabilne) ćelije. Broj ćelija i njihova vijabilnost je određena testom odbacivanja boje sa 0,1% tripan plavim. Vijabilnost ćelija korišćenih u eksperimentu je bila veća od 90%. Biokompatibilnost sve tri vrste materijala je ispitana na osnovu standardnih testova biokompatibilnosti: DET test, MTT test, Agar difuzioni test. Ispitivanje marginalne adaptacije je sprovedeno na 90 ekstrahovanih jednokorenih zuba interkaninog sektora gornje vilice sa intaktnom pulpom, završenim rastom korena, bez frakture i resorpcije korena zuba. Izvršena je endodontska obrada svih zuba i nakon toga su zubi ostavljeni u vlažnoj sredini na 48h, da bi se sprečile frakture prilikom sečenja. Nakon mehaničko medikamentozne obrade i opturacije kanala korena zuba je vršena resekcija vrha korena zuba 3mm, a nakon toga su svi zubi preparisani do dubine od 3 mm unutar kanala, ultrazvučnim nastavcima (EMS, miniMaster Piezon scaler). Zubi su naizmenično podeljeni u 3 grupe (30 zuba po grupi). Prvu grupu čine zubi kojima je apikalni kavitet biti ispunjen amalgamom, u drugoj grupi, apikalni kavitet je ispunjen MTA, a u trećoj trikalcijum-silikatnim cementom. Nakon retrogradne opturacije, zubi su ostavljeni u vlažnoj sredini 48h, do potpunog vezivanja ispitivanih materijala. Nakon vezivanja ispitivanih materijala, zubi su sečeni longitudinalno, finom dijamantskom šajbnom. Marginalna adaptacija ispitivanih materijala je procenjena skening elektronskim mikroskopom (SEM). Pripremljeni uzorci su posmatrani pod uvećanjima 30x, 40x, 80x i 100x. Uvećanje 30x je rađeno radi prikaza celokoupnog retrogradnog punjenja na jednom snimku, tj. spoja materijal-zub. Nakon toga je napravljeno više uzastopnih snimaka sauvećanjem 80x do pune dužine materijala. Na taj način je utvrđeno postojanje i izvršeno merenje marginalne pukotine u mikrometrima. Merenja ukupne dužine marginalne pukotine u mikrometrima u 5 tačaka sa obe strane preparata su vršena u softverskoj aplikaciji Image J software (National Institutes of Health, Bethesda, USA). Tačke su izabrane tako da tačka 1a i tačka 5a predstavljaju gornju i donju ivicu preparata. Tačka 3a predstavlja sredinu rastojanja između tačke 1a i tačke 5a. Tačka 2a i tačka 4a predstavljaju sredinu razmaka između tačke 1a i 3a, odnosno 3a i a5. Tačke 1b-5b su naspramne tačke. Rezultati biokompatibilnosti ukazuju na visok stepen ćelijske kompatibilnosti svih ispitivanih materijala. Međutim, DET testomnije utvrđena statistički značajna razlika u citotoksičnosti između istovetnih ispitivanih materijala u obe ćelijske linije, niti između sva tri ispitivana materijala u obe ćelijske kulture.Poređenjem rezultata MTT testa nakon 24h i 48h, kao i nakon 48h i 72h uočava se da su dobijene srednje vrednosti indeksa citotoksičnosti kod sva tri ispitivana materijala i na obe ćelijske linije manje nakon 48h, odnosno nakon 72h, što ukazuje na oporavak ćelijskog metabolizma. Poređenjem rezultata nakon 24h i nakon 72h, uočava se znatno veći pad vrednosti indeksa citotoksičnosti nakon 72h kod sva tri ispitivana materijala i na obe ćelijske linije. U kulturi ćelija MRC5, kod sva tri ispitivana materijala postoji statistički značajna razlika između indeksa citotoksičnosti izmerenog nakon 24h i nakon 72h, kao i u kulturi ćelija L929. Agar difuzionim testom nije uočena dekolorizacija, niti liza ćelija ispod ispitivanih materijala. Ćelijski odgovor je 0/0 što ukazuje da ovim testom nije utvrđeno postojanje citotoksičnog efekta ispitivanih materijala na ćelijske linije L929 i MRC-5. Ispitivanje marginalne adaptacije materijala je vršeno na osnovu mikrofotografija dobijenih skening elektronskim mikroskopom.. Najpre su testirane razlike na prvoj tački merenja. Rezultati ovog testa pokazuju da postoje značajne razlike između materijala i da amalgam ima značajno više vrednosti izmerenih pukotina u odnosu na preostala dva materijala, dok se vrednosti za MTA i biodentin međusobno značajno ne razlikuju. Kao još jedna referentna tačka uzeta je tačka merenja 5. I u odnosu na vrednosti u ovoj tački merenja zabeležene su značajne razlike između materijala. Post hoc Mann-Whitney test pokazuje da se amalgam značajno razlikuje od preostala dva materijala, dok nema značajnih razlika između MTA i biodentina. Na osnovu medijane može se videti da amalgam ima niže vrednosi u ovoj tački merenja u odnosu na preostala dva materijala. U tačkama 2-4, kao i u tačkama 1-5 (ukupno), ne postoji statistički značajna razlika u marginalnoj adaptaciji ispitivanih materijala. Rezultati biokompatibilnosti ukazuju na visok stepen ćelijske kompatibilnosti svih ispitivanih materijala. Rezultati sva tri testa pokazuju da ne postoji statistički značajna razlika u citotoksičnosti između ispitivanih materijala. MTT test pokazuje da u obe ćelijske kulture, kod istovetnih ispitivanih materijala postoji statistički značajna razlika između indeksa citotoksičnosti izmerenog nakon 24h i nakon 72h. Rezultati ispitivanja marginalne adaptacije pokazuju da u tački 1 najgore zaptiva amalgam, dok izmedju MTA i biodentina nema razlike. U tački 5 najbolje zaptiva amalgam.</p> / <p>Biocompatibility of materials, deployed in periapical surgery, has been a subject of debate in referential literature for some time now. Apart from biocompabillity, root end filling materials are expected to prevent bacteria from entering the surrounding tissue from canal system. The most important factors for successful long term treatment include marginal seal, i.e. adequate marginal adaptation. The aim of this research was to examine biocompatibility and establish the potential difference in biocompatibility between mineral trioxide aggregate, tricalcium silicate cement and dental amalgam according to three cytotoxicity tests, but also to corroborate marginal adaptation of the materials in question for retrograde seal of a root canal. Materials and methods: The experimental part of the research is divided in two parts. In the first part of the research biocompatibility of the materials was examined, while the examination of the marginal adaptation based on the micro images from scanning electron microscope was conducted in the second part. The examination of biocompatibility was executed on two cell lines, mouse fibroblast cell line (L929) and human cell line (MRC-5).Biocompatibility of all three types of material was examined based on three standard biocompatibility tests: DET test, MTT test, Agar diffusion test.The examination of marginal adaptation was carried out on 90 single-rooted tooth extractied human teeth of the intercanine sector of maxilla with intact pulp, mature apices, without root fractures or resorption. All teeth were endodontically treated. After the extirpation, irrigation and opturation, the resection of 3mm of root apex and retrograde preparation with ultrasonic instruments up to 3 mm depth inside the canal was done. Teeth were divided in three groups alternately. The First group include teeth which apical cavitation was filled with amalgam, in the Second group apical cavitation was filled with MTA, and in the Third group with tricalcium silicate cement. After the complete setting of the materials, teeth were cut in longitudinal manner, with fine, diamond tool. Marginal adaptation of the materials was assessed through scanning electron microscope (SEM). Software application Image J software was deployed to measure the total length of marginal fissure in micrometers in 5 pointson both sides of the preparation . The results of biocompatibility indicate high degree of cell compatibility of all tested materials. DET test did not assert any statistically significant difference in cytotoxicity between the same tested materials in both cell lines, nor between all three tested materials in both cell cultures. Comparing the results of MTT test after 24h and 48h, and 48h and 72h, it is noted that middle value of cytotoxicity index with all three tested materials and on both cell lines is lower after 48h, and after 72h, indicating the recovery of cell metabolism. In both cell cultures, with all three tested materials there is statistically significant difference between measured cytotoxicity indices after 24h and after 72h. Agar diffusion test did not show decolorization, nor cell lysis underneath the tested materials, which means that cytotoxic effect was not asserted on cell lines L929 i MRC-5. The examination of marginal adaptation was conducted according to micro images gained by scanning electron microscope. The results in the measure point 1 indicate there are significant differences between materials, and amalgam has significantly higher values of the measured fissures in relation to remaining two materials, whereas values for MTA and biodentine do not differ significantly. In measure point 5 significant differences were noted. Post hoc Mann-Whitney test shows that amalgam has lower values of the tested fissures in this measure point in relation to two other materials, while there were no significant differences between MTA i biodentine. In points 2-4, as well as points 1-5 (in total), there were no statistically significant differences in marginal adaptation of the examined materials. The results of all three tests show that there is no statistically significant difference in cytotoxicity between examined materials. MTT test shows that there is, in both cell cultures, with the same examined materials , statistically significant difference between cytotoxicity indices measured after 24h and after 72h. The results of the examination of marginal adaptation show that in point 1 amalgam has the worst seal, whereas between MTA and biodentine there is no difference. In point 5 amalgam has the best seal.</p>
|
Page generated in 0.0688 seconds