Spelling suggestions: "subject:"line compressor"" "subject:"eine compressor""
1 |
Developing a dynamic control system for mine compressed air networks / Schalk Willem van HeerdenVan Heerden, Schalk Willem January 2014 (has links)
Mines in general, make use of compressed air systems for daily operational activities. Compressed air on mines is traditionally distributed in two typical fashions. Firstly, direct pipe feed systems for single shafts or compressed air ring networks where multiple shafts are supplied with compressed air from an integral system. These compressed air networks make use of number compressors feeding the ring from various locations in the network. While mines have sophisticated control systems to control these compressors they are not dynamic.
Compressors are selected on static priorities for a chosen time period of the day. While this is acceptable for some days it is not always the ideal solution. The compressed air demand of the ring is dynamic and it is difficult to estimate the future need of the system. The Dynamic Compressor Selector (DCS) is described as a solution to this problem.
DCS is a computer based control system featuring a Graphical User Interface (GUI). The aim of DCS is to dynamically calculate a control pressure set-point, given the demand for compressed air as well as choose the optimal compressors to supply the given compressed air. This will reduce the power requirement of the compressed air ring as well as reduce compressor cycling.
DCS was implemented and tested on a single mine compressed air system. Achieved results were 1.8 MW in electricity savings as well as the added benefit of reduced cycling. This saving results in a cost saving of R3.7 million per annum. The problems and shortfalls of the system are also discussed as well as possible future directions for moving forward. / MIng (Computer and Electronic Engineering), North-West University, Potchefstroom Campus, 2014
|
2 |
Developing a dynamic control system for mine compressed air networks / Schalk Willem van HeerdenVan Heerden, Schalk Willem January 2014 (has links)
Mines in general, make use of compressed air systems for daily operational activities. Compressed air on mines is traditionally distributed in two typical fashions. Firstly, direct pipe feed systems for single shafts or compressed air ring networks where multiple shafts are supplied with compressed air from an integral system. These compressed air networks make use of number compressors feeding the ring from various locations in the network. While mines have sophisticated control systems to control these compressors they are not dynamic.
Compressors are selected on static priorities for a chosen time period of the day. While this is acceptable for some days it is not always the ideal solution. The compressed air demand of the ring is dynamic and it is difficult to estimate the future need of the system. The Dynamic Compressor Selector (DCS) is described as a solution to this problem.
DCS is a computer based control system featuring a Graphical User Interface (GUI). The aim of DCS is to dynamically calculate a control pressure set-point, given the demand for compressed air as well as choose the optimal compressors to supply the given compressed air. This will reduce the power requirement of the compressed air ring as well as reduce compressor cycling.
DCS was implemented and tested on a single mine compressed air system. Achieved results were 1.8 MW in electricity savings as well as the added benefit of reduced cycling. This saving results in a cost saving of R3.7 million per annum. The problems and shortfalls of the system are also discussed as well as possible future directions for moving forward. / MIng (Computer and Electronic Engineering), North-West University, Potchefstroom Campus, 2014
|
3 |
Development of an energy management solution for mine compressor systems / Johan Nicolaas du PlessisDu Plessis, Johan Nicolaas January 2010 (has links)
Eskom is under increasing pressure to provide reliable and sustainable electricity. Demand Side
Management (DSM), offers a short– to medium–term solution to this problem. During 2009, the mining
sector consumed approximately 16% of the domestic electricity supplied by Eskom. This made the
mining sector one of the major targets for Eskom–initiated DSM programmes.
The mining industry uses compressed air for a wide variety of applications and production purposes. This
creates many opportunities to reduce electricity consumption and operating costs. Reducing the airsystem
demand may however not result in significant electrical energy savings, unless the compressed–air
supply is accurately managed to meet the reduced demand.
Until recently, compressor control in the mining sector generally consisted of operating the compressors
continuously, regardless of the actual demand for compressed air. Excessive compressed air is blown off
into the atmosphere resulting in energy loss. This usually occurs when the compressors are operated
manually.
A computer–controlled compressor management solution, which optimises the efficiency potential of the
compressed–air supply, is required to obtain significant electrical energy savings. The need for such a
solution was addressed by the development of an energy management solution for mine compressor
systems. This solution is referred to as Energy Management System (EMS) and is capable of starting,
stopping, loading and unloading compressors. In addition to this, compressor output can be controlled to
maintain a desired pressure set–point.
In this study, the development and implementation of EMS on ten different mine compressor systems is
presented. Automatic compressor capacity control was implemented, while an operator manually initiated
compressor starting; stopping; loading and unloading, according to EMS control schedules.
Centralised compressor control is one of the main advantages offered by EMS, especially for
compressed–air systems with multiple compressor systems at different geographic locations. EMS
facilitated effective and sustainable electrical energy reductions for all these compressed–air systems. / Thesis (M. Ing. (Computer and Electronical Engineering))--North-West University, Potchefstroom Campus, 2011.
|
4 |
Development of an energy management solution for mine compressor systems / Johan Nicolaas du PlessisDu Plessis, Johan Nicolaas January 2010 (has links)
Eskom is under increasing pressure to provide reliable and sustainable electricity. Demand Side
Management (DSM), offers a short– to medium–term solution to this problem. During 2009, the mining
sector consumed approximately 16% of the domestic electricity supplied by Eskom. This made the
mining sector one of the major targets for Eskom–initiated DSM programmes.
The mining industry uses compressed air for a wide variety of applications and production purposes. This
creates many opportunities to reduce electricity consumption and operating costs. Reducing the airsystem
demand may however not result in significant electrical energy savings, unless the compressed–air
supply is accurately managed to meet the reduced demand.
Until recently, compressor control in the mining sector generally consisted of operating the compressors
continuously, regardless of the actual demand for compressed air. Excessive compressed air is blown off
into the atmosphere resulting in energy loss. This usually occurs when the compressors are operated
manually.
A computer–controlled compressor management solution, which optimises the efficiency potential of the
compressed–air supply, is required to obtain significant electrical energy savings. The need for such a
solution was addressed by the development of an energy management solution for mine compressor
systems. This solution is referred to as Energy Management System (EMS) and is capable of starting,
stopping, loading and unloading compressors. In addition to this, compressor output can be controlled to
maintain a desired pressure set–point.
In this study, the development and implementation of EMS on ten different mine compressor systems is
presented. Automatic compressor capacity control was implemented, while an operator manually initiated
compressor starting; stopping; loading and unloading, according to EMS control schedules.
Centralised compressor control is one of the main advantages offered by EMS, especially for
compressed–air systems with multiple compressor systems at different geographic locations. EMS
facilitated effective and sustainable electrical energy reductions for all these compressed–air systems. / Thesis (M. Ing. (Computer and Electronical Engineering))--North-West University, Potchefstroom Campus, 2011.
|
Page generated in 0.0862 seconds