Abstract     In this project, I present a design of a scale model of a linear generator (LG) similar to a full size Wave Energy Converter (WEC) being developed at Uppsala University since 2002 and commercialized by Seabased AB. The purpose of a WEC is to convert the energy from ocean waves into electrical energy. In order to implement the behaviour of the prototype design, a preliminary study has been done to further build it for use in education, laboratory tests and research. The challenge with this project is to scale down the WEC but maintain the shape, appearance and characteristics of the generator for educational purposes. A miniature version of a WEC, previously developed by Uppsala University in collaboration with Seabased Industry AB, has been designed with scaling rate 1:14 of the linear dimensions. In this case, the value of the output power is not important- it has simply been calculated. The electrical rated parameters of the three phase generator are power  26 W,  peak line-line voltage  13 V and  rated armature current  2 A. The mechanical parameters utilized in the design are the total length and the diameter of the miniature WEC, 50 cm and 25 cm, respectively. The simulated prototype model (described in Section 5.4) has been validated with an experimental setup comprising translator and stator (described in Section 5.1), where the translator is moved by a programmed industrial robot. The experimental results have shown good agreement with the simulations.