Södra DuraPulp is a relatively new eco-composite, made from natural wood fibers and polylactic acid (PLA), which comes from corn starch. Until now, there are only few applications for DuraPulp, mainly in the area of design. To find new fields of application, more knowledge about its mechanical material properties are of great interest.This study deals with characterizing the mechanical properties of DuraPulp in an analytical way by means of micromechanical modelling and evaluation with help of Matlab. The mechanical properties for PLA were taken from scientific literature. Not all properties of the wood fibers could be found in literature (particularly Poisson’s ratios were unavailable). Therefore, they partly had to be assumed within reasonable boundaries. These assumptions are later validated regarding their influence on the final product.Figures and tables were used to present and compare the in- and out-of-plane E-Moduli, shear moduli and Poisson’s ratios of DuraPulp. The calculated in-plane E-Moduli were then compared to those obtained from an earlier study, where DuraPulp was tested in tension. The results showed that experimental and analytical values are very similar to each other. / Södra DuraPulp är en relativt ny eco-komposit, tillverkat av naturliga trä fibrer och polylactic syra som kommer från majsstärkelser. I dagsläget finns det få användningsområden för DuraPulp, huvudsakligen används det inom design. För att expandera användningsområdet behövs det mer kunskaper angående de mekaniska egenskaperna för materialet. Studien handlar om att karakterisera de mekaniska egenskaperna för DuraPulp på ett analytiskt sätt i form av mikro-mekanisk modellering och evaluering med hjälp av Matlab. De huvudsakliga mekaniska egenskaperna för PLA kunde hämtas från flera vetenskapliga källor, men de motsvarande mekaniska egenskaperna för fibrer kunde inte alla valideras. Delvis antogs dem i rimliga gränser och deras inverkan validerades med hjälp av en parameter studie.Figurer och tabeller användes för att presentera och jämföra in- och ut-plan E-Moduler, skjuvmoduler och tvärkontraktionstalen av DuraPulp. De beräknade in-plan E-modulerna för DuraPulp jämfördes med motsvarande E-moduler från en tidigare studie där DuraPulp genomgick dragtest. Resultatet visade att analytiska och experimentella värden överensstämmer bra med varandra.

Although it is common to model modulus of elasticity (MOE) and modulus of rupture (MOR) of graded lumber as normal, lognormal, or Weibull distributions, recent theories and empirical practices have cast doubt on these models. Mathematical proofs have been used to shown how the MOR distributions of graded lumber can be derived from the MOR distributions of mill-run populations. The MOR distribution of a graded lumber subpopulation is "pseudo- truncated" and does not exhibit the same theoretical form as the mill-run population from which it was drawn. Therefore, it is essential to explore the properties of mill-run lumber populations and properly characterize their MOE and MOR distributions. To investigate this topic, this dissertation has three objectives: 1) to determine if the within-mill means and standard deviations of MOE and MOR in mill-run southern pine (Pinus spp.) lumber differ over time, 2) to determine the correlations among hand-held grain angle meter readings, MOE, and MOR in mill- run southern pine lumber, and 3) to model statistical distributions of MOE and MOR in mill-run red pine (Pinus resinosa) and spruce (Picea spp.) lumber. This research features four main sections: 1) an introduction summarizing the conclusions of each chapter, 2) a chapter investigating if there are statistically significant differences between the means and variances of MOE and MOR in mill-run southern pine lumber populations at the same mill over time, 3) a chapter evaluating the bivariate correlations among handheld grain angle meter readings, MOR, and three measures of MOE in mill-run southern pine lumber, and 4) a chapter modeling the distributions of MOE and MOR in mill-run red pine and spruce lumber populations and comparing those to previous work on mill-run southern pine lumber populations.

No description available.