No description available.

<p>Using more than just on antenna can significantly speed up the data rate in a wireless communication system. These systems are commonly referred to as Diversity- and MIMO-systems. Due to tight volume restriction for the antennas, e.g. in a mobile phone, electromagnetic coupling between the antennas will degrade the capacity of the wireless system and lower the coverage.</p><p><p>In the proposed thesis, a thorough study of Ethertronics’ standard antennas will be established in which the antennas will be used in a multiport system, e.g. MIMO. The thesis will be strongly related to Ethertronics’ engagement in Chase and therefore also dependent on the latest progresses on MPA (Multiport Analyzer) developed in Chase. The thesis will result in a working methodology how to use MPA plus design-, location- and orientation rules for the standard antennas used in a multiport system.</p></p>

Using more than just on antenna can significantly speed up the data rate in a wireless communication system. These systems are commonly referred to as Diversity- and MIMO-systems. Due to tight volume restriction for the antennas, e.g. in a mobile phone, electromagnetic coupling between the antennas will degrade the capacity of the wireless system and lower the coverage. In the proposed thesis, a thorough study of Ethertronics’ standard antennas will be established in which the antennas will be used in a multiport system, e.g. MIMO. The thesis will be strongly related to Ethertronics’ engagement in Chase and therefore also dependent on the latest progresses on MPA (Multiport Analyzer) developed in Chase. The thesis will result in a working methodology how to use MPA plus design-, location- and orientation rules for the standard antennas used in a multiport system.

Multi-Output Dependence (MOD) learning is a generalization of standard classification problems that allows for multiple outputs that are dependent on each other. A primary issue that arises in the context of MOD learning is that for any given input pattern there can be multiple correct output patterns. This changes the learning task from function approximation to relation approximation. Previous algorithms do not consider this problem, and thus cannot be readily applied to MOD problems. To perform MOD learning, we introduce the Hierarchical Multi-Output Nearest Neighbor model (HMONN) that employs a basic learning model for each output and a modified nearest neighbor approach to refine the initial results. This paper focuses on tasks with nominal features, although HMONN has the initial capacity for solving MOD problems with real-valued features. Results obtained using UCI repository, synthetic, and business application data sets show improved accuracy over a baseline that treats each output as independent of all the others, with HMONN showing improvement that is statistically significant in the majority of cases.

<p>In the high-end research process of wireless systems and in the race for the development of the new technologies, MIMO (Multiple Input, Multiple Output) is getting more attention now days. It has a high potential usage in the 3G and 4G communications and beyond. The MIMO based system has got the ability to increase the data throughput in spectrum-limited conditions. With the increase and complexity of wireless applications, the spectrum efficiency improvement in the physical layer will be saturated. MIMO is predicted to be one of the major features for the next generation wireless networking. This thesis work is a part of an ongoing project of the Generic MIMO decoder design carried out at the research laboratory, LESTER at Lorient, France. I was involved in the study of MIMO concepts, orthogonal and Space-time codes and later involved in the design and optimization of the architecture for the core operator for the ML decoder used in the reception of the MIMO system,which is presented in this report work.</p>

This paper considers the combination of interference alignment and distributed antenna systems to improve the rate performance of cell-edge users in the cellular downlink. Because the power resources of each antenna in distributed antenna systems are geographically separated, practical implementations of distributed antenna systems require consideration of per-antenna power constraints on the transmit antennas. For this reason, we consider interference alignment with two types of power constraints: per-antenna power inequality constraints and per-antenna power equality constraints. On one hand, we show that interference alignment with per-antenna power inequality constraints is arbitrarily feasible using a technique of antenna power back-off but suffers from a loss of performance that we quantify in the case of Rayleigh-fading. On the other hand, we show that interference alignment with per-antenna power equality constraints does not suffer from a systematic loss of performance but yet requires more antennas to be feasible. We develop algorithms for implementing interference alignment with both types of constraints and numerically validate the results of our analysis. Finally, we demonstrate using the 3rd Generation Partnership Project spatial channel model in a cellular setting that interference alignment with distributed antenna systems has better rate performance than interference alignment with centralized antenna systems throughout the entire cell, especially near the cell boundary. / text

In the high-end research process of wireless systems and in the race for the development of the new technologies, MIMO (Multiple Input, Multiple Output) is getting more attention now days. It has a high potential usage in the 3G and 4G communications and beyond. The MIMO based system has got the ability to increase the data throughput in spectrum-limited conditions. With the increase and complexity of wireless applications, the spectrum efficiency improvement in the physical layer will be saturated. MIMO is predicted to be one of the major features for the next generation wireless networking. This thesis work is a part of an ongoing project of the Generic MIMO decoder design carried out at the research laboratory, LESTER at Lorient, France. I was involved in the study of MIMO concepts, orthogonal and Space-time codes and later involved in the design and optimization of the architecture for the core operator for the ML decoder used in the reception of the MIMO system,which is presented in this report work.

No description available.

Ao longo dos últimos anos tem se observado no mundo uma expansão do setor leiteiro. Parte dessa expansão se deve a novas tecnologias que foram adotadas nas últimas décadas, mas também ocorreu por causa da queda, ou da anulação de barreiras comerciais. Contudo, notou-se também uma queda no número de fazendas leiteiras. Sendo o leite uma commodity os preços seguem as oscilações de mercado - oferta e demanda - e nenhum dos agentes possui poder para influenciar nos preços de compra e venda dessa mercadoria. Como os boletins do CEPEA mostram, os preços no ano passado têm-se mantido abaixo da média histórica, referente à última década, mas os termos de troca com relação a quantidade de litros de leite para se comprar insumos e defensivos se mantêm em patamares estáveis com tendência de alta. Tendo em vista esse problema, surge a necessidade de buscar compreender melhor como funciona o sistema de produção do setor leiteiro. Este trabalho satisfatoriamente conseguiu detectar através das fronteiras estocásticas de produção simples - leite como único produto de saída - e multi-output - leite e outros produtos animais existentes nas fazendas - além da regressão quantílica para análise de quantis variados da produção de leite, quais os insumos utilizados pelos produtores que oferecem melhores retornos para sua produção bem como analisar fatores de eficiência (BATTESE, COELLI; 1995; CHIDMI; SOLÍS; CABRERA, 2011). Os resultados apresentados apontam para a necessidade de se levar em consideração a inter-relação entre os insumos considerados - função de produção translog - e identificaram os insumos referentes ao capital - quantidade de vacas ordenhadas e gastos com máquinas e equipamentos - e ao trabalho - gastos com salários - como principais insumos da atividade pecuária. Os gastos com medicamentos animais, com energia elétrica e a área disponível para a atividade pecuária se mostraram contraproducentes indicando mau uso ou uso excessivo desses fatores, além de ressaltar a importância do capital na pecuária. Em geral, para quase todos os modelos testados, a produção leiteira apresentou retornos constantes à escala e nível de eficiência em torno de 88% em média para as fronteiras estocásticas e 90% para as estimativas feitas com regressão quantílica. Entre os fatores de eficiência identificados estão a capacidade de armazenamento de silos e tanques de refrigeração para o leite e a margem bruta líquida obtida com a atividade. Os fatores de ineficiência identificados são a prática de queimadas e o percentual de mulheres na administração das unidades produtivas. Com relação aos variados modelos estimados percebeu-se, em suma, a necessidade de se intensificar a produção pecuária e de melhorar a infraestrutura das fazendas. / Over the past few years it has been observed in the world an expansion of the dairy industry. Part of this expansion is due to new technologies that have been adopted in recent decades, but also because of the fall, or the annulment of trade barriers. However, it has also been noted a drop in the number of dairy farms. Being a commodity, milk prices follow the market oscillations - supply and demand - and none of the agents has enough power to influence buying and selling prices of this commodity. As the CEPEA bulletins show, prices last year have remained below the historical average for the last decade, but the terms of trade regarding the amount of liters of milk to buy inputs and pesticides at levels remain stable with uptrend. In view of this problem, there is the need to get a better understanding of how the dairy sector production system works. This work satisfactorily managed to detect, through the single-output stochastic production frontier method - value of milk production as output - and multi-output - value of milk and other existing animal products at the farms - besides quantile regression analysis for multiple production quantiles, which inputs used by farmers offer the best outcome for their production as well as analyzing efficiency factors (BATTESE; COELLI, 1995; CHIDMI; SOLÍS; CABRERA, 2011). The estimated results pointed to the need of considering the interrelation of considered inputs - translog production function - and identified the capital related inputs - quantity of milked cows and expenditure on machinery and equipment - and work related inputs - expenditure on wages - as main production inputs. Expenditure on animal drugs and on electricity and the area available for livestock activity proved counterproductive indicating misuse or overuse of these factors, in addition to emphasizing the importance of capital in livestock. In general, for most of the tested models, dairy production showed constant returns to scale and an average efficiency level of 88% for stochastic frontier models and 90% for estimates done using quantile regression. Among the identified efficiency factors are the storage capacity of silos and cooling tanks for milk and the net gross margin with activity. The identified inefficiency factors are the practice of burning and the percentage of women in the management of production units. With regard to various models estimated it was realized, in short, the need to intensify livestock production and to improve the infrastructure of the farms.

Ao longo dos últimos anos tem se observado no mundo uma expansão do setor leiteiro. Parte dessa expansão se deve a novas tecnologias que foram adotadas nas últimas décadas, mas também ocorreu por causa da queda, ou da anulação de barreiras comerciais. Contudo, notou-se também uma queda no número de fazendas leiteiras. Sendo o leite uma commodity os preços seguem as oscilações de mercado - oferta e demanda - e nenhum dos agentes possui poder para influenciar nos preços de compra e venda dessa mercadoria. Como os boletins do CEPEA mostram, os preços no ano passado têm-se mantido abaixo da média histórica, referente à última década, mas os termos de troca com relação a quantidade de litros de leite para se comprar insumos e defensivos se mantêm em patamares estáveis com tendência de alta. Tendo em vista esse problema, surge a necessidade de buscar compreender melhor como funciona o sistema de produção do setor leiteiro. Este trabalho satisfatoriamente conseguiu detectar através das fronteiras estocásticas de produção simples - leite como único produto de saída - e multi-output - leite e outros produtos animais existentes nas fazendas - além da regressão quantílica para análise de quantis variados da produção de leite, quais os insumos utilizados pelos produtores que oferecem melhores retornos para sua produção bem como analisar fatores de eficiência (BATTESE, COELLI; 1995; CHIDMI; SOLÍS; CABRERA, 2011). Os resultados apresentados apontam para a necessidade de se levar em consideração a inter-relação entre os insumos considerados - função de produção translog - e identificaram os insumos referentes ao capital - quantidade de vacas ordenhadas e gastos com máquinas e equipamentos - e ao trabalho - gastos com salários - como principais insumos da atividade pecuária. Os gastos com medicamentos animais, com energia elétrica e a área disponível para a atividade pecuária se mostraram contraproducentes indicando mau uso ou uso excessivo desses fatores, além de ressaltar a importância do capital na pecuária. Em geral, para quase todos os modelos testados, a produção leiteira apresentou retornos constantes à escala e nível de eficiência em torno de 88% em média para as fronteiras estocásticas e 90% para as estimativas feitas com regressão quantílica. Entre os fatores de eficiência identificados estão a capacidade de armazenamento de silos e tanques de refrigeração para o leite e a margem bruta líquida obtida com a atividade. Os fatores de ineficiência identificados são a prática de queimadas e o percentual de mulheres na administração das unidades produtivas. Com relação aos variados modelos estimados percebeu-se, em suma, a necessidade de se intensificar a produção pecuária e de melhorar a infraestrutura das fazendas. / Over the past few years it has been observed in the world an expansion of the dairy industry. Part of this expansion is due to new technologies that have been adopted in recent decades, but also because of the fall, or the annulment of trade barriers. However, it has also been noted a drop in the number of dairy farms. Being a commodity, milk prices follow the market oscillations - supply and demand - and none of the agents has enough power to influence buying and selling prices of this commodity. As the CEPEA bulletins show, prices last year have remained below the historical average for the last decade, but the terms of trade regarding the amount of liters of milk to buy inputs and pesticides at levels remain stable with uptrend. In view of this problem, there is the need to get a better understanding of how the dairy sector production system works. This work satisfactorily managed to detect, through the single-output stochastic production frontier method - value of milk production as output - and multi-output - value of milk and other existing animal products at the farms - besides quantile regression analysis for multiple production quantiles, which inputs used by farmers offer the best outcome for their production as well as analyzing efficiency factors (BATTESE; COELLI, 1995; CHIDMI; SOLÍS; CABRERA, 2011). The estimated results pointed to the need of considering the interrelation of considered inputs - translog production function - and identified the capital related inputs - quantity of milked cows and expenditure on machinery and equipment - and work related inputs - expenditure on wages - as main production inputs. Expenditure on animal drugs and on electricity and the area available for livestock activity proved counterproductive indicating misuse or overuse of these factors, in addition to emphasizing the importance of capital in livestock. In general, for most of the tested models, dairy production showed constant returns to scale and an average efficiency level of 88% for stochastic frontier models and 90% for estimates done using quantile regression. Among the identified efficiency factors are the storage capacity of silos and cooling tanks for milk and the net gross margin with activity. The identified inefficiency factors are the practice of burning and the percentage of women in the management of production units. With regard to various models estimated it was realized, in short, the need to intensify livestock production and to improve the infrastructure of the farms.