No description available.

ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California / Direct spatial antenna modulation (DSAM) is a new approach to phased array control that opens up new "smart antenna" architecture possibilities. The DSAM technique leverages the inherent spatial differences of excitation in an antenna in a novel way to achieve the equivalent of conventional modulation and beam control effects. Smart antenna techniques are of potentially increasing importance to test range operations given a trend toward more flexible, internetworked, and autonomous test activities. The DSAM technique has been demonstrated through several generations of analysis, simulation, and prototyping, but has previously only been applied to narrowband antenna designs. Furthermore, the IQ DSAM approach in particular has not been previously implemented in hardware. This paper details the application of IQ DSAM to achieve wideband phase control using a commercial off the shelf (COTS) antenna. The phase control performance of IQ DSAM over a range of 1.5 GHz to 4 GHz is measured across relative field control angles of +/- 45 degrees. The measured IQ DSAM performance is compared to what could be expected from a conventional phased array element control architecture.

Bacterial adhesion is the first step of biofilm formation that plays various roles in the environment and the human body. Examples of undesirable roles of biofilm formation include metal rust, sewage sludge and bacteria-related diseases. Desirable roles are biofiltration and bioremediation.For a decade, Atomic Force Microscopy (AFM) has been the primary tool used to study the adhesion and elastic properties of individual bacteria. In this work we show it is possible to use a Surface Forces Apparatus (SFA) to measure elastic and adhesive properties of small collections of surface bound bacteria. The measurements are conducted with incomplete, patterned bacterial films and we have developed a protocol to image the contact area with AFM after the experiment. Using the SFA, we measured the force profile between a P. Aeruginosa PAO1 film and a bare mica surface. We repeated the measurement in the same contact position for up to ten days to determine the effect of desiccation on the film material properties, and then moved to the new contact area to measure the film thickness and elastic properties. A large shrinkage of the bacterial film thickness was measured during the first few days due to the bacterial film desiccation and rearrangement. The proportion of shrinkage depends on factors such as the bacterial film coverage, roughness, temperature and relative humidity. Thickness compressibility was estimated from the force curves. As a force approximation, the stress at the center of the contact (σ) and the area of the contact were estimated by applying the Hertz model. Since the film is incomplete the calculated area in contact was reduced by a factor estimated from the optical image of the contact zone. Adhesiveness was measured in receding force profiles. Maximum adhesive force was detected in the first day, due to the high capillary force, decreased by the bacterial film desiccation and increased again due to the conditioning film.

No description available.

Approved for public release, distribution is unlimited / The Free Electron Laser has the potential to become a revolutionary weapon system. Deep magazines, low cost-per-shot, pinpoint accuracy, and speed of light delivery give this developing weapon system significant advantages over conventional systems. One limiting factor in high energy laser implementation is thermal blooming, a lensing effect which is caused by the quick heating of the atmosphere, so that the laser beam does not focus on the desired spot, thereby degrading the effectiveness of the laser on target. The use of multiple beam directors focusing on a target from a single platform may mitigate thermal blooming by allowing half of the laser's energy to travel through a given volume of air, so that they only overlap very near the target. Less energy traveling through a given volume of space means less heating, and therefore lessens the effects of thermal blooming. Also, simulations of FEL's were conducted modifying parameters such as the number of undulator periods, electron beam focus, the normalized Rayleigh length, and mirror output coupling, in order to determine optimum design parameters. New parameters for the next proposed FEL were simulated to examine the effect of mirror tilt on laser power and extraction as well. / Lieutenant, United States Navy

No description available.

No description available.

Les travaux présentés dans cette thèse portent sur l’étude et la conception de lentilles continues en guide d’ondes à plans parallèles (PPW) pour des applications multi-faisceaux. La conversion du front d'onde est assurée par une lentille formée d’une lame et d'une cavité transversale. Ce concept, proposant une approche mécanique simplifiée et possiblement purement métallique, est particulièrement attractif pour les futurs systèmes de communications par satellites (GEO/LEO) requérants des solutions à moindre coût tout en maintenant de hautes performances. La première partie de cette thèse présente la réalisation d’un outil d’analyse numérique basée sur l’optique géométrique (GO). Une prédiction rapide et précise des performances en rayonnement est obtenue. En combinant cet outil avec des processus d’optimisation, des performances en dépointage sur un large secteur angulaire sont ensuite démontrées, incluant une stabilité des diagrammes en rayonnement (ouverture à mi-puissance, niveaux de lobes secondaires et pertes en dépointage). Un prototype fonctionnant dans la bande Ka est réalisé, validant les performances précédemment obtenues. De hautes efficacités de rayonnement sont également mises en avant sur l’ensemble de la plage de fréquence. Enfin un second prototype plus compact basé sur de multiples lentilles est proposé et étudié, démontrant des performances similaires à la première solution fabriquée et mesurée. / The activities presented in this PhD focus on the study and development of continuous parallel plate waveguide (PPW) lenses for multiple beam applications. The wave front conversion is ensured by a PPW transversal ridge and cavity. The proposed concept, based on a simplified mechanical approach and possibly full-metal, is particularly suitable for future satellite communication systems (GO/LEO) requiring low-cost antennas while maintaining high performances. The first part of the thesis deals with the development of a numerical analysis tool based on geometrical optics (GO). A fast and accurate prediction of the radiation performance is provided.Combining the tool with optimization processes, large scanning performances have been demonstrated, including a stability of the radiation pattern performance (HPBW, SLL, scan loss). A prototype working at Ka band has been manufactured, validating the performances demonstrated previously. High radiation efficiencies are also proved over the entire frequency range. Finally, a second prototype targeting performances in compactness and based on multiple lenses is proposed and studied, showing similar performances as the first solution fabricated and measured.