Thesis (M.S.)--Air Force Institute of Technology, 2007. / AFIT/GOR/ENS/07-06. "March 2007." Title from title page of PDF document (viewed on: Nov. 15, 2007). Includes bibliographical references (leaves 154-157).

Thesis (M.S.)--University of Texas at El Paso, 2009. / Title from title screen. Vita. CD-ROM. Includes bibliographical references. Also available online.

Thesis (M.Phil.)--City University of Hong Kong, 2005. / "Submitted to Department of Building and Construction in partial fulfillment of the requirements for the degree of Master of Philosophy" Includes bibliographical references (leaves 239-241)

No description available.

The second marketing model addresses interpretation issues of traditional multiple dimensional scaling (MDS) model, and has three key features. First, it can provide an explicit meaning to each dimension. Second, it can directly provide a link between brand positions and brand attributes, so that marketing mix can be designed to optimize share or profit. Third, for a case of n brands and m product attributes, we only need to estimate m nonzero parameters to represent all brand positions in the reduced space of d dimensions where d < m. The model is applied to a real data set of thirty four cars and nine attributes. Empirical findings suggest that the proposed model is a viable alternative to existing methods. / This thesis proposes two marketing models. The first model is a multiple criteria ranking (MCR) model. It proposes a consensus approach to solve multiple criteria ranking problems. Marketing decisions frequently involve ranking various subjects using multiple criteria. However, it is difficult to have acceptance from all subjects. The proposed multiple criteria ranking model allows each subject to have a "say" in the evaluation process. All subjects together resolve their conflicts through voting so that consensus ranking can be derived under the majority rule principle. The new ranking procedure can be formulated as a series of mathematical programming models, and illustrated with two cases. First, ranking the research performance of thirty one marketing scholars according to their publications in four leading marketing journals. Second, ranking the performance of one hundred information technology companies. / Lam Pong Yuen. / "June 2000." / Added t.p. in Chinese. / Director: Lau Kin Nam. / Source: Dissertation Abstracts International, Volume: 61-08, Section: A, page: 3259. / Thesis (Ph.D.)--Chinese University of Hong Kong, 2000. / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. Ann Arbor, MI : ProQuest dissertations and theses, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. Ann Arbor, MI : ProQuest Information and Learning Company, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstracts in English and Chinese. / School code: 1307.

At no point in history have we demanded so much from our agricultural land whilst simultaneously leaving so little room for management error. Of the many possible environmental impacts from agriculture, soil and water salinisation has some of the most long-lived and deleterious effects. Despite its importance, however, land managers are often unable to make informed decisions of how to manage the risk of salinisation due to a lack of data. Furthermore, there remains no universally agreed method for salinity risk mapping. This thesis addresses these issues by investigating new methods for producing high-resolution predictions of soil salinity, soil physical properties and groundwater depth using a variety of traditional and emerging ancillary data sources. The results show that the methodologies produce accurate predictions yielding natural resource information at a scale and resolution not previously possible. Further to this, a new methodology using fuzzy logic is developed that exploits this information to produce high-resolution salinity risk maps designed to aid both agricultural and natural resource management decisions. The methodology developed represents a new and effective way of presenting salinity risk and has numerous advantages over conventional risk models. The incorporation of fuzzy logic provides a meaningful continuum of salinity risk and allows for the incorporation of uncertainty. The method also allows salinity risk to be calculated relative to any vegetation community and shows where the risk is coming from (root-zone or groundwater) allowing more appropriate management decisions to be made. The development of this methodology takes us a step closer to closing what some have called our greatest gap in agricultural knowledge. That is, our ability to manage the salinity risk at the subcatchment scale.

Evolutionary Structural Optimisation (ESO) is a relatively new design tool used to improve and optimise the design of structures. It is a heuristic method where a few elements of an initial design domain of finite elements are iteratively removed. Such a process is carried out repeatedly until an optimum design is achieved, or until a desired given area or volume is reached. There have been many contributions to the ESO procedure since its conception back in 1992. For example, a provision known as Bi-Directional ESO (BESO) has now been incorporated where elements may not only be removed, but added. Also, rather than deal with elements where they are either present or not, the designer now has the option to change the element's properties in a progressive fashion. This includes the modulus of elasticity, the density of the material and the thickness of plate elements, and is known as Morphing ESO. In addition to the algorithmic aspects of ESO, a large preference exists to optimise a structure based on a selection of criteria for various physical processes. Such examples include stress minimisation, buckling and electromagnetic problems. In a changing world that demands the enhancement of design tools and methods that incorporate optimisation, the development of methods like ESO to accommodate this demand is called for. It is this demand that this thesis seeks to satisfy. This thesis develops and examines the concept of multicriteria optimisation in the ESO process. Taking into account the optimisation of numerous criteria simultaneously, Multicriteria ESO allows a more realistic and accurate approach to optimising a model in any given environment. Two traditional methods � the Weighting method and the Global Criterion (Min-max) method have been used, as has two unconventional methods � the Logical AND method and the Logical OR method. These four methods have been examined for different combinations of Finite Element Analysis (FEA) solver types. This has included linear static FEA solver, the natural frequency FEA solver and a recently developed inertia FE solver. Mean compliance minimisation (stiffness maximisation), frequency maximisation and moment of inertia maximisation are an assortment of the specific objectives incorporated. Such a study has provided a platform to use many other criteria and multiple combinations of criteria. In extending the features of ESO, and hence its practical capabilities as a design tool, the creation of another optimisation method based on ESO has been ushered in. This method concerns the betterment of the bending and rotational performance of cross-sectional areas and is known as Evolutionary Moment of Inertia Optimisation (EMIO). Again founded upon a domain of finite elements, the EMIO method seeks to either minimise or maximise the rectangular, product and polar moments of inertia. This dissertation then goes one step further to include the EMIO method as one of the objectives considered in Multicriteria ESO as mentioned above. Most structures, (if not all) in reality are not homogenous as assumed by many structural optimisation methods. In fact, many structures (particularly biological ones) are composed of different materials or the same material with continually varying properties. In this thesis, a new feature called Constant Width Layer (CWL) ESO is developed, in which a distinct layer of material evolves with the developing boundary. During the optimisation process, the width of the outer surrounding material remains constant and is defined by the user. Finally, in verifying its usefulness to the practical aspect of design, the work presented herein applies the CWL ESO and the ESO methods to two dental case studies. They concern the optimisation of an anterior (front of the mouth) ceramic dental bridge and the optimisation of a posterior (back of the mouth) ceramic dental bridge. Comparisons of these optimised models are then made to those developed by other methods.

Quality Capability Self-diagnosis is a convenient and economical way to assess the performance of an operating quality system, as well as a basis for initiating necessary corrective actions essential to quality improvement and preparation for certification. This paper describes the research leading to the development of a cost-effective and systematic methodology for performing quality capability self-diagnosis. ISO 9000 series standards and the methods used to implement multicriteria system evaluation are employed to provide a sound basis for the development of this quality capability self-diagnosis scheme (QCSDS). The QCSDS has been developed to assist manufacturers in the conduct of quality assurance audits using internal personnel. The methodological structure of QCSDS is presented in two major parts: a regular model and a refined model. The regular model includes: (1) development of quality system auditing criteria, (2) selection of a suitable checklist developed from ISO 9000 series requirements, (3) development of importance weights for applicable criteria, (4) performance measurement, (5) quality system rating, (6) analysis of quality auditing results, and (7) suggestions for improvement. The refined model is developed to strengthen capability of the model and its reliability for confirming the effectiveness of an operating quality system using quality cost analysis, utility theory and regression analysis. A decision support system (QCSDDSS) based on the Quattro Pro spreadsheet is incorporated to facilitate the application of QCSDS. The QCSDDSS development is based on the regular model using ISO 9002 to provide both tabular and graphical displays for performance demonstration and improvement analysis. / Graduation date: 1994

Multiple criteria decision analysis (MCDA) techniques are developed to address challenging classification problems arising in engineering management and elsewhere. MCDA consists of a set of principles and tools to assist a decision maker (DM) to solve a decision problem with a finite set of alternatives compared according to two or more criteria, which are usually conflicting. The three types of classification problems to which original research contributions are made are <ol> <li>Screening: Reduce a large set of alternatives to a smaller set that most likely contains the best choice. </li> <li>Sorting: Arrange the alternatives into a few groups in preference order, so that the DM can manage them more effectively. </li> <li>Nominal classification: Assign alternatives to nominal groups structured by the DM, so that the number of groups, and the characteristics of each group, seem appropriate to the DM. </ol> Research on screening is divided into two parts: the design of a sequential screening procedure that is then applied to water resource planning in the Region of Waterloo, Ontario, Canada; and the development of a case-based distance method for screening that is then demonstrated using a numerical example. <br /><br /> Sorting problems are studied extensively under three headings. Case-based distance sorting is carried out with Model I, which is optimized for use with cardinal criteria only, and Model II, which is designed for both cardinal and ordinal criteria; both sorting approaches are applied to a case study in Canadian municipal water usage analysis. Sorting in inventory management is studied using a case-based distance method designed for multiple criteria ABC analysis, and then applied to a case study involving hospital inventory management. Finally sorting is applied to bilateral negotiation using a case-based distance model to assist negotiators that is then demonstrated on a negotiation regarding the supply of bicycle components. <br /><br /> A new kind of decision analysis problem, called multiple criteria nominal classification (MCNC), is addressed. Traditional classification methods in MCDA focus on sorting alternatives into groups ordered by preference. MCNC is the classification of alternatives into nominal groups, structured by the DM, who specifies multiple characteristics for each group. The features, definitions and structures of MCNC are presented, emphasizing criterion and alternative flexibility. An analysis procedure is proposed to solve MCNC problems systematically and applied to a water resources planning problem.

Multiple criteria decision analysis (MCDA) techniques are developed to address challenging classification problems arising in engineering management and elsewhere. MCDA consists of a set of principles and tools to assist a decision maker (DM) to solve a decision problem with a finite set of alternatives compared according to two or more criteria, which are usually conflicting. The three types of classification problems to which original research contributions are made are <ol> <li>Screening: Reduce a large set of alternatives to a smaller set that most likely contains the best choice. </li> <li>Sorting: Arrange the alternatives into a few groups in preference order, so that the DM can manage them more effectively. </li> <li>Nominal classification: Assign alternatives to nominal groups structured by the DM, so that the number of groups, and the characteristics of each group, seem appropriate to the DM. </ol> Research on screening is divided into two parts: the design of a sequential screening procedure that is then applied to water resource planning in the Region of Waterloo, Ontario, Canada; and the development of a case-based distance method for screening that is then demonstrated using a numerical example. <br /><br /> Sorting problems are studied extensively under three headings. Case-based distance sorting is carried out with Model I, which is optimized for use with cardinal criteria only, and Model II, which is designed for both cardinal and ordinal criteria; both sorting approaches are applied to a case study in Canadian municipal water usage analysis. Sorting in inventory management is studied using a case-based distance method designed for multiple criteria ABC analysis, and then applied to a case study involving hospital inventory management. Finally sorting is applied to bilateral negotiation using a case-based distance model to assist negotiators that is then demonstrated on a negotiation regarding the supply of bicycle components. <br /><br /> A new kind of decision analysis problem, called multiple criteria nominal classification (MCNC), is addressed. Traditional classification methods in MCDA focus on sorting alternatives into groups ordered by preference. MCNC is the classification of alternatives into nominal groups, structured by the DM, who specifies multiple characteristics for each group. The features, definitions and structures of MCNC are presented, emphasizing criterion and alternative flexibility. An analysis procedure is proposed to solve MCNC problems systematically and applied to a water resources planning problem.