Upper-limb myoelectric prostheses are controlled by muscle activity information recorded on the skin surface using electromyography (EMG). Intuitive prosthetic control can be achieved by deploying statistical and machine learning (ML) tools to decipher the user's movement intent from EMG signals. This thesis proposes various means of advancing the capabilities of non-invasive, ML-based control of myoelectric hand prostheses. Two main directions are explored, namely classification-based hand grip selection and proportional finger position control using regression methods. Several practical aspects are considered with the aim of maximising the clinical impact of the proposed methodologies, which are evaluated with offline analyses as well as real-time experiments involving both able-bodied and transradial amputee participants. It has been generally accepted that the EMG signal may not always be a reliable source of control information for prostheses, mainly due to its stochastic and non-stationary properties. One particular issue associated with the use of surface EMG signals for upper-extremity myoelectric control is the limb position effect, which is related to the lack of decoding generalisation under novel arm postures. To address this challenge, it is proposed to make concurrent use of EMG sensors and inertial measurement units (IMUs). It is demonstrated this can lead to a significant improvement in both classification accuracy (CA) and real-time prosthetic control performance. Additionally, the relationship between surface EMG and inertial measurements is investigated and it is found that these modalities are partially related due to reflecting different manifestations of the same underlying phenomenon, that is, the muscular activity. In the field of upper-limb myoelectric control, the linear discriminant analysis (LDA) classifier has arguably been the most popular choice for movement intent decoding. This is mainly attributable to its ease of implementation, low computational requirements, and acceptable decoding performance. Nevertheless, this particular method makes a strong fundamental assumption, that is, data observations from different classes share a common covariance structure. Although this assumption may often be violated in practice, it has been found that the performance of the method is comparable to that of more sophisticated algorithms. In this thesis, it is proposed to remove this assumption by making use of general class-conditional Gaussian models and appropriate regularisation to avoid overfitting issues. By performing an exhaustive analysis on benchmark datasets, it is demonstrated that the proposed approach based on regularised discriminant analysis (RDA) can offer an impressive increase in decoding accuracy. By combining the use of RDA classification with a novel confidence-based rejection policy that intends to minimise the rate of unintended hand motions, it is shown that it is feasible to attain robust myoelectric grip control of a prosthetic hand by making use of a single pair of surface EMG-IMU sensors. Most present-day commercial prosthetic hands offer the mechanical abilities to support individual digit control; however, classification-based methods can only produce pre-defined grip patterns, a feature which results in prosthesis under-actuation. Although classification-based grip control can provide a great advantage over conventional strategies, it is far from being intuitive and natural to the user. A potential way of approaching the level of dexterity enjoyed by the human hand is via continuous and individual control of multiple joints. To this end, an exhaustive analysis is performed on the feasibility of reconstructing multidimensional hand joint angles from surface EMG signals. A supervised method based on the eigenvalue formulation of multiple linear regression (MLR) is then proposed to simultaneously reduce the dimensionality of input and output variables and its performance is compared to that of typically used unsupervised methods, which may produce suboptimal results in this context. An experimental paradigm is finally designed to evaluate the efficacy of the proposed finger position control scheme during real-time prosthesis use. This thesis provides insight into the capacity of deploying a range of computational methods for non-invasive myoelectric control. It contributes towards developing intuitive interfaces for dexterous control of multi-articulated prosthetic hands by transradial amputees.

Upper Limb work-related musculoskeletal disorders (WMSDs) present a significant health risk to industrial workers. To address this, rigid-body exoskeletons have been widely used in industrial settings to mitigate these risks while exosuits offer advantages such as reduced weight, lower inertia, and no need for precise joint alignment, However, they remain in the early stages of development, especially for reducing muscular effort in repetitive and forceful tasks like heavy lifting and overhead work. This study introduces a multiple degrees-of-freedom cable-driven upper limb bilateral exosuit for human power augmentation. Two control schemes were developed and compared: an IMU based controller, and a myoelectric controller to compensate for joint torque exerted by the wearer. The results of preliminary experiments showed a substantial reduction in muscular effort with the exosuit's assistance, with the myoelectric control scheme exhibiting reduced operational delay. In parallel, the neuromusculoskeletal modeling and simulator (NMMS) has been widely applied in various fields. Most of the research works implements the PD-based internal model of human’s central nervous system to simulate the generated muscle activation. However, the PD-based internal models in recent works are tuned by the empirical data which requires empirical data from human subject experiments. In this dissertation, an off-policy DRL algorithm, Deep Deterministic Policy Gradient was implemented to tune the PD-based internal model of human’s central nervous system. Compared to the conventional approaches, the DRL-based auto-tuner can learn the optimal policy through trial-and-error which doesn’t require human subject experiment and empirical data. The experiment this work showed promising results of this DRL-based auto-tuner for internal-model of human’s central nervous system.

No description available.

This report presents the design and manufacturing process of a bionic signal messagebroker (BSMB), intended to allow communication between implanted electrodes andprosthetic legs designed by Ossur. The BSMB processes and analyses the data intorelevant information to control the bionic device. The intention is to carry out eventdetection in the BSMB, where events in the muscle signal are matched to the events ofthe gait cycle (toe-o, stance, swing).The whole system is designed to detect muscle contraction via sensors implantedin residual muscles and transmit the signals wireless to a control unit that activatesassociated functions of a prosthetic leg. Two users, one transtibial and one transfemoral,underwent surgery in order to get electrodes implantable into their residual leg muscles.They are among the rst users in the world to get this kind of implanted sensors.A prototype of the BSMB was manufactured. The process took more time thanexpected, mainly due to the fact that it was decided to use a ball grid array (BGA)microprocessor in order to save space. That meant more complicated routing and higherstandards for the manufacturing of the board. The results of the event detection indicatethat the data from the implanted electrodes can be used in order to get sucient controlover prosthetic legs. These are positive ndings for users of prosthetic legs and shouldincrease their security and quality of life.It is important to keep in mind when the results of this report are evaluated that allthe testing carried out were only done on one user each.

No description available.