Thesis (Ph.D.)--University of Wollongong, 2009. / Typescript. Includes bibliographical references.

Flame retardant (FR) intumescent additives and montmorillonite (MMT) organoclay incorporated nylon-6 nanocomposite (FR-NC-PA6) fibers with a diameter of about 200 nm were fabricated by electrospinning. Before electrospinning, dispersion and exfoliation of the FR additive and MMT in nylon-6 were achieved by twin-screw extrusion. Tensile, TGA and UL-94 flammability tests were first performed using injection-molded bulk samples. The tensile modulus of FR-NC-PA6 was 45% higher than that of neat PA6, but tensile strength and elongation at break decreased by 23% and 98.7%, respectively. It is worth noting that although the TGA results show that FR-NC-PA6 has a slightly earlier decomposition temperature than neat PA6, it did not drip under fire and had the best rating (V-0) in UL 94 test, while neat PA6 is only rated as V-2. SEM and EDX of char residues after the UL 94 test clearly show the oxygen-rich protective char layer on the surface. These results indicate the advantage of using clay and FR additive in bulk-form PA6. Flammability of electrospun nanocomposite fibers was characterized by Micro-combustion calorimeter (MCC), a small-scale test to screen flammability of polymer materials. The MCC results show that the nano-fillers in both bulk and fiber form could effectively improve flame retardant properties of the material. Electrospun fibers had similar combustion properties as bulk materials. In addition to FR applications, superhydrophobic surface was another area that was explored using the electrospun nanocomposite fibers. Static water contact angle (WCA) test showed that samples with 5wt% clay even without plasma treatment greatly improved the WCA to 140°, probably due to the barrier effect of nanoclay platelets. Plasma treatment was used to modify the surface energy, further improving WCA to as high as 160°. However, fiber structure was partially etched away when overexposed to the plasma. This etching effect increased the surface roughness. Clay incorporated samples had higher level of surface roughness and better resistance to plasma etching compared to neat nylon 6. / text

Conductive and flexible nanocomposites can have wide applications in textiles, including wearable sensors, antenna, electrodes, etc. The objective of this research is to develop electrically conductive fibers and films that are flexible and deformable for use in textile structures able to accommodate the drape and movement of the human body. To achieve this objective, we evaluate the electrical properties of PEDOT:PSS/nickel nanostrand as well as nylon 6/nickel nanostrand nanocomposites. Nickel nanostrands (NiNS) were first used to reinforce an intrinsically conductive polymer, Poly(3,4-ethylenedioxythiophene) (PEDOT:PSS), in order to fabricate nanocomposite films with high electrical conductivity. The electrical properties of the films were evaluated by the Van der Pauw method. The addition of 10 wt% nanostrands in PDOT:PSS provided a two order of magnitude improvement in electrical conductivity. In addition to PDOT:PSS, nylon 6/NiNS nanocomposite fibers were produced using electrospinning and exhibited diameters in the sub-micron range. The NiNS-reinforced fibers had electrical conductivity that exceeded the ESD range, which offers the potential for use in protective textile applications. / text

Polymers, typically known, as plastics, long time were only insulators. In 1977 D.J. Heeger, A.G. Diarmid ir H. Shirakawa discovered a new type of this organic material – conductive polymers. Conductive polymers have a unique property of high electrical conductivity, where the electronic structure of polymer chains plays essential role. In this work we theoretically investigate conductive organic materials. Conductance of this materials is the result of charge carriers tunnelling. Tunnelling is a temperature-dependent process due to the interaction of electrons with phonons (phonon – kvaziparticle describing the periodical motion of cristal atoms). The basic quantum-mechanical theory what helps us to interpret the experimental results – phonon-assisted tunnelling theory. Experimental results were taken from other authors papers. In this theory is assumed that tunnelling rate depends on both – temperature and field. All the calculations were taken in Mathematica 5.0. Programs made in this algebrical system helped us to fit experimentical and theoretical data. It let us to describe tunnelling rate variating parameters. The main attention was taken to investigate how some of this parameters change tunnelling rate (W) and estimate parameters of polyacetylene and carbon nanotubes (CNT). This materials were taken because of it`s unique properties. Polyacetylene can become very good conductor by it`s doping. Carbon is one of the most abundant ellements in the Earth crust. It... [to full text]

This research work focuses on single wall carbon nanotube (SWNT)/polymer composites and novel structured electrospun polymer materials. Poly (methyl methacrylate) (PMMA) is used as polymer matrix. Obtaining SWNT/PMMA composite with enhanced mechanical and electrical properties is one of the research goals. The first important step is to figure out a method for achieving uniform SWNT dispersion in PMMA. Eight different solvents were used to disperse SWNT in PMMA. It is found that the polar component of the solubility parameter (£_p) of the solvent affects SWNT dispersion in PMMA. SWNT dispersion in PMMA improves with increasing solvent Ôp value, and the most uniform dispersion is obtained in nitromethane, which is the most polar solvent employed in this study. SWNT/PMMA composite films at various SWNT concentrations were processed employing nitromethane as the solvent. Mechanical and electrical property enhancements are observed. Processing, structure, morphology, and properties of these composites are discussed. A comparison between reinforcement efficiency of SWNT, multiwall carbon nanotubes (MWNT), and vapor grown carbon nano fibers (VGCNF) in PMMA is also discussed. In order to electrospin SWNT/PMMA/nitromethane solution into composite nanofibers successfully, first PMMA was electrospun. With increasing solution concentration, morphology of the electrospun polymer changed from particles to fibers. At relatively low solution concentrations, micro- and nano-structured polymer particles, and at higher solution concentrations, porous and solid nanofibers are observed. SWNT/PMMA/nitromethane solution was electrospun into polymer shell-SWNT core nanofibers. Solvent characteristics play an important role on particle or fiber mat morphology. The qualitative relationship between solvent properties (evaporation rate, dielectric constant, surface tension, and viscosity) and particle morphologies is discussed. By tailoring solution properties and electrospinning conditions, one can produce particles or fibers with controlled morphology for specific applications.

Thesis (M.S.)--University of Alabama at Birmingham, 2008. / Description based on contents viewed Feb. 5, 2008; title from title screen. Includes bibliographical references (p. 65-68).

Thesis (doctoral)--Göteborg University, 2007. / Original thesis t.p. with abstract (2 p.) inserted. Includes bibliographical references.

Thesis (Ph. D.)--Ohio State University, 2008.

Thesis (Ph. D.)--University of Alabama at Birmingham, 2009. / Title from PDF title page (viewed Sept. 2, 2009). Additional advisors: Uday Vaidya, Burton Patterson, Susan Bellis, Mark Weaver, Vinoy Thomas. Includes bibliographical references.

Thesis (M.S.)--University of Alabama at Birmingham, 2008. / Title from PDF t.p. (viewed July 21, 2010). Includes bibliographical references.