The focus in this thesis is to improve knowledge of the BWR related uncertainties void, channel bow, and control rods. The presence of void determines the moderation of neutrons in BWRs. A high void fraction is less efficient in moderating neutrons than a low one. As a consequence, the ratio of thermal to fast neutrons is dependent on the surrounding void fraction. In this thesis, calculations with 2D/3D codes corroborate this dependence, the void correlation, to be linear and very robust to changes in different reactor parameters. The void fraction could be predicted from the ratio of simultaneously measured reaction rates from thermal and fast neutron detectors over the whole core with an uncertainty of ±1.5%. The only parameter found disturbing the void correlation significantly is channel bow. However, since channel bow is the only phenomenon found biasing the void correlation, it is found that the void prediction methodology can be used to indicate channel bow with a sensitivity of 4% per mm bow. Consequently, large channel bows could easily be detected. Increased knowledge of void fractions and channel bow could increase both safety and economy of nuclear power production. This thesis also investigates how 2D/3D codes used in production perform in calculating detailed impact of control rods on pin powers and their ability to perform control rod depletion calculations in the reflector region. It is found that the axial resolution used in 3D nodal codes has very large impact on pin power gradients, i.e., using a standard nodal size of ~15 cm can cause underestimations of 50% in pin power gradients, which could lead to fuel damages. In addition, two methods for determining the neutron flux in the control rod when it is withdrawn from the core are presented. Both methods can be used in a 3D nodal code to reproduce the neutron flux in the reflector region with an uncertainty of ±3%. / Felaktigt tryckt som Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology 715

Submitted by Claudinei Pracidelli (cpracide@ipen.br) on 2014-11-10T11:38:41Z No. of bitstreams: 0 / Made available in DSpace on 2014-11-10T11:38:41Z (GMT). No. of bitstreams: 0 / Dissertação (Mestrado em Tecnologia Nuclear) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Submitted by Claudinei Pracidelli (cpracide@ipen.br) on 2014-11-10T11:38:41Z No. of bitstreams: 0 / Made available in DSpace on 2014-11-10T11:38:41Z (GMT). No. of bitstreams: 0 / A análise por ativação com nêutrons é um método utilizado na determinação de diversos elementos em diferentes tipos de matrizes. Entretanto, quando a amostra contém altos teores de U ocorre o problema de interferência devido aos produtos de fissão do isótopo 235U. Um dos métodos de tratar este problema é fazer a correção usando fatores de interferência devido à fissão do U para os radionuclídeos utilizados nas análises dos elementos. No presente estudo foram determinados os valores dos fatores de interferência devido à fissão do U para os radioisótopos 141Ce, 143Ce,140La, 99Mo, 147Nd, 153Sm e 95Zr no reator nuclear de pesquisas IEA-R1 do IPEN-CNEN/SP. Esses fatores de interferência foram determinados experimentalmente, por meio da irradiação dos padrões sintéticos em uma determinada posição do reator, e teoricamente, determinando a razão dos fluxos de nêutrons epitérmicos e térmicos na mesma posição onde os padrões sintéticos foram irradiados e utilizando parâmetros nucleares da literatura. Os fatores de interferência obtidos foram comparados com os valores reportados em outros estudos. Para avaliar esses fatores de interferência, eles foram aplicados em análises dos elementos alvo deste estudo, nos materiais de referência certificados NIST 8704 Buffalo River Sediment, IRMM BCR-667 Estuarine Sediment e IAEA-SL-1 Lake Sediment. / Dissertação (Mestrado em Tecnologia Nuclear) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP