This dissertation focuses on the fundamental understanding of liquid dynamics confined in polymer membranes. Such knowledge guides the development of better polymer membranes for practical applications and contributes to the general understanding of confined liquid dynamics in various nanoporous materials. First, we investigate the membrane transport by experimental measurements on a PFSA membrane and computer modeling of the confined liquid molecules. We probe the nano-scale environment in the ionomer membrane by determining the activation energy of diffusion. We notice two structural features of the PFSA membrane that dominate membrane transport. At relatively high hydrations, the nano-scale phase-separation creates bulk-like water in the ionomer membrane and prompts fast transport of mobile species. At relatively low hydrations, the nanoconfinement of the polymer matrix leads to the ordering of confined water and prompts a high energy barrier for transport. We then delve deeper into the confinement effect by molecular modeling of various nanoconfining geometries, including carbon nanotubes, parallel graphene sheets, and parallel rigid rods. We notice retarded water dynamics under hydrophobic confinement regardless of the geometry. We further investigate the confined water by determining the residence time of water around water, which evaluates the timescale of associations between water molecules. We learn that a decreasing confinement size prompts longer associations among water molecules. Further, we propose that the prolonged associations are responsible for the retarded water dynamics under hydrophobic confinement. Next, we turn our attention to the effect of interactions between mobile species (mostly water molecules) and a confining surface. In ionomer membranes, interactions between mobile species and the ionic groups dominate the water-surface interactions. We start by looking at water-ion interactions in bulk solutions. Using solutions at varying concentrations, we notice a temperature-concentration superposition behavior from diffusion coefficients of water molecules and ions in the solutions in both experimental and computational results. Observation of this superposition behavior in bulk solutions is unprecedented. The temperature-concentration superposition parallels the well-known time-temperature superposition. We are able to extract the offset of reciprocal temperature, which fits well to a Williams-Landel-Ferry type equation. The temperature-concentration superposition points to the new perspective that the effect of ions on water dynamics can be similar to the effect of lowering temperature. We further investigate the effect of ions by modeling ions/charges onto confining geometries. Remarkably, we reveal that the presence of ions can break the ordered water structure induced by confinement. The hydrophobic confinement prompts the ordering of water molecules, which leads to slower diffusion and higher activation energy. The presence of ions/charges on the confining surface has multiple effects on the dynamics of confined water. First, the ions associate strongly with neighboring water molecules while breaking the hydrogen-bonding network between water molecules. Second, the disruption of the hydrogen-bonding network leads to decreased activation energy of diffusion and enhanced water mobility. At relatively high ion density, the water-ion interactions overcome the structure-breaking effect and lead to retarded water diffusion. Overall, the studies presented in this dissertation augment our understanding of water transport in nanostructures by revealing the rich behavior of liquid-water dynamics under both hydrophobic and ionic confinement. / Doctor of Philosophy / Polymer separations membranes contribute to important applications such as fuel cells and water desalination. Optimizing the separation ability of polymer membranes improves their practical performance. The transport property of a polymer membrane depends on its nanoscale and microscale structures. This dissertation focuses on the nanoscale structure-transport relations in ionic polymer membranes. We utilize nuclear magnetic resonance techniques and molecular dynamics simulations to probe the transport properties. We investigate the effects of membrane nanostructure and water-ion interactions on the dynamics of confined water. Such knowledge not only guides the development of high-performance membranes but also contributes to the fundamental understanding of liquid dynamics in nanoporous materials.

Block copolymers have been extensively applied in diverse fields including packaging, electrolytes, delivery devices, and biosensors. Multiple investigations have been carried out on polymeric materials for cargo delivery purpose to understand how they behave over time. Block copolymer micelles (BCMs) have demonstrated superiority to deliver cargo, especially in drug delivery due to their encapsulation of hydrophobic agents. This dissertation will mainly study BCMs for potential applications in cargo delivery. Methods to study BCMs, including NMR spectroscopy, relaxometry and diffusometry, can provide valuable molecular information, such as chemical structure, translational motion, inter- or intramolecular interaction, dynamics, and exchange kinetics. Therefore, this dissertation describes applications of versatile NMR methods to reveal the fundamental behaviors of block copolymer self-assemblies, such as their dynamic stability, cargo partitioning, polymer chain exchange, and chain distribution in solution. We have investigated two BCM systems. Poly(ethylene oxide)-b-(ε-caprolactone) (PEO-PCL) is a model system to study BCM dynamic stability. PEO-PCL can self-assemble into spherical micelles at 1% w/v in D2O-THF-d8 mixed solvents. We used NMR diffusometry to quantify diffusion coefficients and populations of micelles and unimers (i.e. free polymer chains in solution) over a range of temperature (21 – 50 °C) and solvent composition (10 – 100 vol % THF-d8). By mapping the micelle-unimer coexistence phase diagrams, we are able to enhance our ability to understand and design micelle structure and dynamics. Moreover, we can also probe the chain exchange kinetics between micelles using a new technique we developed – time-resolved NMR spin-lattice relaxation (T1) or TR-NMR. This technique is an analog to time-resolved small-angle neutron scattering (TR-SANS), which can monitor specific signal intensity changes caused after mixing of isotope-labeled micelle solutions. A second system, Pluronic® F127 (PEO99PPO69PEO99) is a test system to study BCM structure and dynamic changes upon drug uptake. Pluronic® F127 is a commercial copolymer that can solubilize different hydrophobic drugs in micelles. We successfully encapsulated three model drugs into Pluronic® F127 BCMs and investigated the effects of polymer concentration and drug composition on drug partitioning fractions. Also, we proposed to design and synthesize a series of block copolymers with varied glass transition temperatures in core-forming blocks. Using NMR diffusometry, we have measured the existing unimer concentrations in micellar solutions and correlated these results with chain mobility and internal chemical composition. Lastly, we have extended our expertise in NMR and polymers into the study of ion-containing polymer systems (polyelectrolytes). A critical problem in polymer science is the inability to reliably measure the molecular weight of polyelectrolytes. We are developing methods to solve this problem by using NMR diffusometry, rheology, scattering, and scaling theories to accomplish general molecular weight measurements for polyelectrolytes. In short, this dissertation describes studies to provide more perspectives on structural and dynamic properties at various time and length scales for polymeric materials. NMR measurements, in combination with many other advanced techniques, have given us a better picture of soft matter behaviors and provided guidance for synthesis and processing efforts, especially in block copolymer micelles for delivery purposes. / Doctor of Philosophy / Block copolymers have been extensively applied in diverse fields in packaging, electrolytes and nano-scale drug delivery carriers. In the area of cancer treatment, only a limited number of drug nanocarriers have been approved for clinical applications. Therefore, it is very important to understand the principles behind drug delivery for targeted purposes. There have been many studies on polymeric delivery carriers but their behaviors have not been completely understood. Therefore, we have tremendous interest in unraveling the mysteries in those polymeric systems. Among a multitude of techniques to study block copolymer materials, the NMR method serves as a potent tool for its non-destructive, chemical-specific and isotope-selective merits. NMR can provide basic information about block copolymer self-assembly and other polymeric properties, such as chemical structure, molecular interactions and diffusion coefficients of species of interests. Chapters 3, 4, 5, 6, and 7 have investigated different classes of polymeric materials, mainly block copolymer micelles, for their structure and stability, exchange kinetics of polymer chains or cargo, and translational properties. Greater understanding about the fundamental properties of these polymeric systems, is essential for enabling new applications and new research areas.

The purpose of this study was to investigate the fundamental characteristics of a chelating surfactant in terms of solution behaviour, chelation of divalent metal ions, and interaction in mixtures with different foaming agents and divalent metal ion, as well as examining its prospects in some practical applications. Chelating surfactants are functional molecules, with both surface active and chelating properties, which are water soluble and therefore suitable for chelation in many aqueous environments. The dual functionality offers the possibility to recover the chelating surfactant as well as the metals. The DTPA (diethylenetriaminepentaacetic acid)-based chelating surfactant 4-C12-DTPA (2-dodecyldiethylenetriaminepentaacetic acid) was synthesized at Mid Sweden University. In the absence of metal ions, all eight donor atoms in the headgroup of 4-C12-DTPA are titrating and the headgroup charge can be tuned from +3 to -5 by altering the pH. The solution properties, studied by surface tension measurements and NMR diffusometry, were consequently found strongly pH dependent. pH measurements of chelating surfactant solutions as a function of concentration was used to extract information regarding the interaction between surfactants in the aggregation process. Small differences in the conditional stability constants (log K) between coordination complexes of DTPA and 4-C12-DTPA, determined by competition measurements utilizing electrospray ionization mass spectrometry (ESI-MS), indicated that the hydrocarbon tail only affected the chelating ability of the headgroup to a limited extent. This was further confirmed in hydrogen peroxide bleaching of thermomechanical pulp (TMP) treated with 4-C12-DTPA. Interaction parameters for mixed systems of 4-C12-DTPA and different foaming agents were calculated following the approach of Rubingh’s regular solution theory. The mixtures were also examined with addition of divalent metal ions in equimolar ratio to the chelating surfactant. Strong correlation was found between the interaction parameter and the phase transfer efficiency of Ni2+ ions during flotations. Furthermore, a significant difference in log K between different metal complexes with 4-C12-DTPA enabled selective recovery of the metal ion with the highest log K. The findings in this study contribute to the understanding of the fundamental characteristics of chelating surfactants, which can be further utilized in practical applications.