Spelling suggestions: "subject:"nanocrystals -- eynthesis"" "subject:"nanocrystals -- asynthesis""
1 |
Nanocrystal stabilization, synthesis and assembly using supercritical fluidsShah, Parag Suresh 28 August 2008 (has links)
Not available / text
|
2 |
Aspects of colloidal nanocrystals: patterning, catalysis and dopingStowell, Cynthia Ann 28 August 2008 (has links)
Not available / text
|
3 |
Design of novel catalysts by infusion of presynthesized nanocrystals into mesoporous supportsGupta, Gaurav, Ph. D. 11 September 2012 (has links)
Traditionally, supported metal catalysts have been synthesized by reduction of precursors directly over the support. In these techniques, it is challenging to control the metal cluster size, composition and crystal structure. Herein, we have developed a novel approach to design catalysts with controlled morphologies by infusing presynthesized nanocrystals into the supports. High surface area mesoporous materials, including graphitic carbons, have been utilized for obtaining a high degree of metal dispersion to enhance catalyst stabilities and activities. Gold and iridium nanocrystals have been infused in mesoporous silica with loadings up to 2 wt % using supercritical CO₂ as an antisolvent in toluene to enhance the van der Waals interactions between nanocrystals and the silica. The iridium catalysts show high catalytic activity and do not require high temperature annealing for ligand removal, as ligands bind weakly to the iridium surface. To further enhance metal loadings to >10 % in the catalysts, short-ranged interactions between the metal nanocrystals and the support are further strengthened with weakly binding ligands to expose more of the metal surface to the support. For pre-synthesized FePt nanocrystals, coated with oleic acid and oleylamine ligands, high loadings >10 wt % in mesoporous silica are achieved, without using CO₂. The strong metal-support interactions favor FePt adsorption on the support and also enhance stability against sintering at high temperatures. High resistance to sintering favors formation of the FePt intermetallic crystal structure with <4 nm size upon thermal annealing at 700 °C. The fundamental understanding of the metal-support interactions gained from these studies is then utilized in the design of highly stable Pt and Pt-Cu electrocatalysts with controlled size, composition and alloy structure supported on graphitized mesoporous carbons for oxygen reduction. The resistance of the graphitic carbons to oxidation coupled with strong metal-support interactions mitigate nanoparticle isolation from the support, nanoparticle coalescence, Pt dissolution and subsequent Ostwald ripening and thus enhance catalyst stability. The control of the Pt nanocrystal morphology with high concentrations of highly active (111) surface leads to 25% higher activities than commercial Pt catalysts. Furthermore, the catalyst activities obtained for Pt-Cu catalysts are 4-fold higher than Pt catalysts due to strained Pt shell generated from electrochemical dealloying of copper from the nanoparticle surface. / text
|
4 |
Angle-, energy- and position-resolved plasmon resonance coupling between gold nanocrystals. / 金顆粒納米晶中角度、能量和空間位置分辨的表面等離子共振耦合 / Angle-, energy- and position-resolved plasmon resonance coupling between gold nanocrystals. / Jin ke li na mi jing zhong jiao du, neng liang he kong jian wei zhi fen bian de biao mian deng li zi gong zhen ou heJanuary 2010 (has links)
Shao, Lei = 金顆粒納米晶中角度、能量和空間位置分辨的表面等離子共振耦合 / 邵磊. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2010. / Includes bibliographical references. / Abstracts in English and Chinese. / Shao, Lei = Jin ke li na mi jing zhong jiao du, neng liang he kong jian wei zhi fen bian de biao mian deng li zi gong zhen ou he / Shaolei. / Abstract --- p.1 / 摘要 --- p.iii / Acknowledgement --- p.v / Table of Contents --- p.vii / List of Figures --- p.ix / List of Tables --- p.xiv / Chapter 1. --- Introduction --- p.1 / Chapter 1.1 --- Localized Surface Plasmon Resonances of Noble Metal Nanocrystals --- p.3 / Chapter 1.1.1 --- Dielectric Functions of Noble Metal Nanocrystals --- p.3 / Chapter 1.1.2 --- Absorption and Scattering of Light by Noble Metal Nanoparticles --- p.7 / Chapter 1.2 --- Coupling between Localized Surface Plasmons --- p.14 / Chapter 1.2.1 --- Theoretical Treatments for Plasmon Coupling --- p.14 / Chapter 1.2.2 --- Unique Properties Resulting from Plasmon Coupling --- p.15 / Chapter 1.2.3 --- Applications Based on Plasmon Coupling --- p.17 / Chapter 1.3 --- Outline of Thesis --- p.18 / Chapter 2. --- Growth of Gold Nanocrystals and Characterization Techniques --- p.26 / Chapter 2.1 --- Growth of Gold Nanocrystals --- p.26 / Chapter 2.2 --- Characterization Techniques --- p.29 / Chapter 3. --- Surface Plasmon Coupling in Homodimers of Elongated Gold Nanocrystals --- p.34 / Chapter 3.1 --- Formation of Homodimers of Elongated Gold Nanocrystals --- p.35 / Chapter 3.2 --- Angle-Resolved Plasmon Coupling in Gold Nanorod Dimers --- p.37 / Chapter 3.2.1 --- Experimental Results --- p.39 / Chapter 3.2.2 --- FDTD Calculations --- p.43 / Chapter 3.2.3 --- Dipolar Modeling --- p.49 / Chapter 3.3 --- Effect of the Head Shape on the Plasmon Coupling --- p.57 / Chapter 3.4 --- Summary --- p.60 / Chapter 4. --- Surface Plasmon Coupling in Heterodimers of Gold Nanocrystals --- p.64 / Chapter 4.1 --- Formation of Heterodimers of Gold Nanocrystals --- p.65 / Chapter 4.2 --- Energy-Resolved Plasmon Coupling in Gold Nanorod Heterodimers --- p.67 / Chapter 4.3 --- Position-Resolved Plasmon Coupling in Gold Nanorod-Nanosphere Heterodimers --- p.70 / Chapter 4.3.1 --- Experimental Results --- p.71 / Chapter 4.3.2 --- FDTD Calculations --- p.75 / Chapter 4.4 --- Summary --- p.83 / Chapter 5. --- Summary and Conclusion --- p.87
|
5 |
Solution-based synthesis and processing of nanocrystalline ZrB₂-based compositesXie, Yanli. January 2008 (has links)
Thesis (Ph.D)--Materials Science and Engineering, Georgia Institute of Technology, 2009. / Committee Chair: Speyer, Robert; Committee Co-Chair: Sanders, Thomas; Committee Member: Gerhardt, Rosario; Committee Member: Sandhage, Kenneth; Committee Member: Snyder, Robert; Committee Member: Zhang, John. Part of the SMARTech Electronic Thesis and Dissertation Collection.
|
6 |
Synthesis and characterization of transition-metal-doped zinc oxide nanocrystals for spintronics. / 基於自旋電子學應用的過渡金屬摻雜氧化鋅納米晶之合成與表徵 / CUHK electronic theses & dissertations collection / Ji yu zi xuan dian zi xue ying yong de guo du jin shu shan za yang hua xin na mi jing zhi he cheng yu biao zhengJanuary 2007 (has links)
A simple bottom-up-based synthetic strategy named a solvothermal technique is introduced as the primary synthetic approach and its crystal growth mechanism is scrutinized. N-type cobalt-doped ZnO-based DMS nanocrystals are employed as a model system, and characterized by a broad spectrum of advanced microscopic and spectroscopic techniques. It is found that the self-orientation growth mechanism, imperfect oriented attachment, is intimately correlated with the high-temperature ferromagnetism via defects. The influence of processing on the magnetic properties, such as compositional variations, reaction conditions, and post-growth treatment, is also studied. In this way, an in-depth understanding of processing-structure-property interrelationships and origins of magnetism in DMS nanocrystals are obtained in light of the theoretical framework of a spin-split impurity band model. In addition, a nanoscale spinodal decomposition phase model is also briefly discussed. / Following the similar synthetic route, copper- and manganese-doped ZnO nanocrystals have been synthesized and characterized. They both show high-temperature ferromagnetism in line with the aforementioned theoretical model(s). Moreover, they display interesting exchange biasing phenomena at low temperatures, revealing the complexity of magnetic phases therein. / Spintronics (spin transport electr onics), in which both spin and charge of carriers are utilized for information processing, is believed to challenge the current microelectronics and to become the next-generation electronics. Nanostructured spintronic materials and their synthetic methodologies are of paramount importance for manufacturing future nanoscale spintronic devices. This thesis aims at studying synthesis, characterization, and magnetism of transition-metal-doped zinc oxide (ZnO) nanocrystals---a diluted magnetic semiconductor (DMS)---for potential applications in future nano-spintronics. / The crystal growth strategy demonstrated in this work not only provides a more convenient approach to directly tailor magnetic properties of advanced multifunctional spintronic materials on a nanometer scale but also contributes to a deeper insight into the microscopic origin of magnetism in wide-band-gap oxide DMSs. / Wang, Xuefeng. / "August 2007." / Adviser: J. B. Xu. / Source: Dissertation Abstracts International, Volume: 69-02, Section: B, page: 1230. / Thesis (Ph.D.)--Chinese University of Hong Kong, 2007. / Includes bibliographical references. / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstract in English and Chinese. / School code: 1307.
|
7 |
Doping And photophysical Properties Of II-VI Semiconductor NanocrystalsNag, Angshuman 12 1900 (has links)
Semiconductor nanocrystals with sizes comparable to the corresponding bulk excitonic diameter exhibit unique size-dependent electronic and optical properties resulting from quantum confinement effect. Such nanocrystals not only allow the study of evolution of bulk properties from the molecular limit providing important fundamental understandings, but also have great technological implications, leading to intense research over the past several years. Besides tuning the crystal size in the nm regime to obtain novel properties, an additional route to derive new functionalities has been to dope transition metal ions into a semiconductor host. Thus, transition metal doped nanocrystals are of great interest since it allows two independent ways to functionalize semiconductor materials, one via the tunability of properties by size variation and other due to properties of such dopants. Chapter 1 of the thesis provide a general introduction to the subject matters dealt in with this thesis, while the necessary methodologies have been discussed in chapter 2. Chapters 3 and 4 of this thesis deal with nanocrystal doping. Following suggestions in previous literatures that the doping of nanocrystal depends strongly upon the crystal structure of the synthesized host nanocrystal, we have studied the phase-transformation between the somewhat zinc-blende and the usual wurtzite structures for CdS and CdSe nanocrystals in chapter 5. In chapter 6 we have pointed out that a gradient structure is essential to achieve nearly ideal photoluminescence efficiency using heterostructured nanocrystals and also achieved strong two-photon absorptions, adding optical bifunctionality to these nanocrystals. Finally, in chapter 7, we establish different approaches to generate white-light using nanocrystals and their unique advantages, as a first step to realizing white light emitting devices.
Chapter 1 provides a brief introduction to various interesting properties and concepts relevant for the studies carried out in the subsequent chapters of this thesis. The present status of the research in the field of semiconductor nanocrystals with an emphasis on synthesizing high quality nanocrystals, doping of nanocrystals and exciting optical properties exhibited by these nanocrystals has been discussed. We have discussed the existing theories and practices of colloidal synthesis that allow us to prepare high quality semiconductor nanocrystals with required size and very narrow size distribution. Optical properties, covering excitonic fine structure, photoluminescence, auger recombination and two-photon absorption have been discussed. We have described heterostructured nanocrystals of different types, particularly in the light of enhancing photoluminescence quantum yield. The difficulty in doping Mn2+ ion in semiconductor nanocrystals and the recent developments in this field have been addressed.
Chapter 2 describes experimental and theoretical methodologies that have been employed to study different nanocrystal systems reported in this thesis. The topics covered in this chapter include UV-visible absorption spectroscopy, steady-state and time-resolved luminescence spectroscopy, X-ray diffraction, transmission electron microscopy, electron spin resonance spectroscopy, photoemission spectroscopy, two-photon absorption and least-squared-error fitting.
Chapter 3 presents a detailed study of water soluble Mn2+-doped CdS nanocrystals synthesized using colloidal routes. Earlier efforts to dope Mn2+ ion into CdS nanocrystals and therefore, obtain the characteristic orange emission, have been largely impeded by the strong overlap of surface state emission of the host and Mn2+ d-emission. We are the first ones to obtain a distinct Mn2+ d-related emission at around 620 nm, well-separated from the surface state emission with its maximum near 508 nm. In spite of using very high (~30%) concentration of Mn2+ precursor, only ~1% Mn2+ was found in the final product, which is consistent with previous literatures, where Mn2+ doping in such nanocrystals was found to be extremely difficult. Most interestingly, present results establish that Mn2+ ion is found to be incorporated preferentially in the relatively larger sized nanocrystals compared to the smaller sized ones even within the narrow size distribution achieved for a specific reaction condition. We found that 55 oC is the optimum reaction temperature to synthesize Mn2+-doped CdS nanocrystals, at higher reaction temperatures, Mn2+ ions get annealed out of the substitutional sites, leading to a lower level of doping in spite of the formation of larger sized particles. Additionally, we could tune the color of the Mn2+ d- emission from red (620 nm) to yellow (580 nm) by increasing the reaction temperature from 55 oC to 130 oC. Another important aspect is that the synthesized nanocrystals readily dissolve in water without any perceptible effect on the Mn2+ d emission intensity.
Chapter 4 discusses the outstanding problem that a semiconductor host in the bulk form can be doped to a large extent, while the same host in the nanocrystal form resist any appreciable level of doping. We first describe two independent models available in literatures to explain this baffling phenomenon. In one, it was suggested that the doping of Mn2+ ion in such nanoclusters is invariably an energetically unfavorable state, thus, Mn2+ ions get annealed out from the host nanocrystal and an increase in reaction temperature facilitate such annealing, a phenomenon known as self-purification. In the second model, it was suggested that the ease of initial adsorption of Mn2+ ions on specific surfaces of a growing nanocrystal, kinetically controls the extent of impurity doping. Specifically, it is easier to dope zinc-blende nanocrystals compared to their wurtzite counterpart. In contrast, the main claim of this chapter is neither crystal structure nor self-purification is as important in nanocrystal doping as lattice mismatch between the dopant and host lattice. To support this claim, we have doped Mn2+ ions into alloyed ZnxCd1-xS nanocrystals. Ionic radius of Mn2+ ion being in between those of Zn2+ and Cd2+ ions, the lattice mismatch between the host ZnxCd1-xS nanocrystal and MnS could be tuned in either side by tuning the composition “x”. It was gratifying to observe that there is an evident maximum of manganese content for Zn0.49Cd0.51S host nanocrystals that has no lattice mismatch with MnS, and the manganese content decreases systematically with increasing compressive as well as tensile lattice mismatches. Based on lattice parameter tuning, we could dope an extraordinarily higher amount of ~7.5% manganese for x = 0.49, at a reaction temperature as high as 310 oC and in a nanocrystal that exhibit wurtzite structure, which was previously suggested unfavorable for doping. These results prove our hypothesis that the strain fields generated because of the lattice mismatch between the dopant and host, are necessarily long range, much longer than typical nanocrystal dimensions and it tends to relieve itself by ejecting the dopant to the surface of nanocrystals, thus, resisting doping in such nanocrystals. High temperature synthesis, on the other hand, leads to a very high photoluminescence efficiency of ~25%.
Chapter 5 deals with the phase-control of CdS and CdSe nanocrystals synthesized employing colloidal routes. CdS nanocrystals exhibit a very sensitive phase transformation from zinc-blende to wurtzite structure by increasing the reaction temperature from 280 to 310 oC, which is also accompanied by an increase in particle size from 6 to 6.8 nm, respectively. More importantly, just by changing the S precursor, it has been possible to change the crystal structure of the CdS nanocrystals at a given synthesis temperature of 310 oC. En route, we have synthesized >12 nm zinc-blende CdS nanocrystal, which is the largest one known in literature and that too employing the highest (310 oC) reaction temperature. Thus, our results contradict with the suggestions already in literatures that low reaction temperature and small crystal size favors zinc-blende structure. Also, we could tune crystal structure between zincblende and wurtzite at a given pressure of the reaction vessel and for a given solvent, just by changing the S-precursor, which is again in contradiction to previously made suggestions in literatures that high pressure or noncoordinating solvents favors the formation of zinc-blende nanocrystals. Instead, we believe that the surface energy might be crucial in stabilizing the usually rare zinc-blende structure for such nanocrystals.
Chapter 6 is divided into two sections and deals with optically active heterostructured nanocrystals exhibiting high photoluminescence efficiency and strong two-photon absorption. In section-I, we probe the internal structure of extraordinarily luminescent (quantum yield = 85%) CdSeS nanocrystals making a somewhat unconventional use of Photoelectron spectroscopy, using the tunability of the photon energy from the third generation synchrotron radiation source as well as the traditional Mg Kα and Al Kα photon sources. CdSeS nanocrystals synthesized with Se:S precursor ratios 1:5 and 1:50, emitting red and green light have CdSe/CdSeS/CdS core/gradient-shell/shell and CdSeS/CdS gradient-core/shell structure, respectively. Gradient interface/core tunes the lattice parameters continuously between that of CdSe and CdS minimizing the interface related defects which in turn increases the photoluminescence efficiency even beyond that obtained from traditional core/shell nanocrystals, as evidenced by the nearly single exponential photoluminescence decay dynamics exhibited by these nanocrystals. Quantum mechanical calculations further show that a graded-core/shell structure leads to a remarkable spatial collapse and consequently a stronger overlap of the HOMO and LUMO wavefunctions towards the core region and thereby, making these luminescent beyond the traditional core/shell limit. In section-II, we have synthesized hetero-structured nanocrystals with CdSe rich core and CdS-ZnS hybrid shell using a simple single-step reaction. These nanocrystals exhibit a very rare example of an optically bi-functional material, simultaneously exhibiting high (~65%) photoluminescence efficiency and strong two-photon absorption cross-section of 1923 GM. Open-aperture z-scan technique was used to measure two-photon absorptions.
Chapter 7 is divided into two sections and deals with the generation of white-light emitting nanophosphors. Section-I addresses the white-light emission from a blend of blue, green and red emitting CdSeS nanocrystals. Different shades of the emitted white-light were achieved by tailoring the composition of the blende. Chromaticity of the emitted light of a particular blend is independent of excitation wavelength. Section-II discusses a new approach to generate white-light by combining surface-state emission of nanocrystalline host and d-electron transitions from dopant centres, with an example of Mn2+-doped CdS nanocrystals. Relative contributions from both surface-state emission and Mn2+ d-emission can be tuned by controlling the dopant concentration to generate white lights of different shades. Similar to section-I, here again the chromaticity of the emitted light is independent of the excitation wavelength; but this approach offers additional advantages. Since the surface state emission as well as the Mn2+ d-emission are relatively less sensitive to a size variation compared to the band-edge emission, the chromaticity of the emitted light is not critically dependent on the particle size. Most importantly, these nanocrystals exhibit a huge stokes shift between the absorption and emission spectra resulting in a complete absence of the well-known self-absorption problem, thus, chromaticity of the white-light emitted by these nanocrystals remains unchanged both in dilute dispersion form as well as in solid state.
Also there are two appendices in the thesis. Appendix A discusses the preparation of InP nanocrystals using a novel solvothermal route. Appendix B contains the equations explaining photoemission intensity ratios between Se and S (ISe/IS) for a model nanocrystal with a given internal structure.
|
8 |
Solution-based synthesis and processing of nanocrystalline ZrB₂-based compositesXie, Yanli 24 November 2008 (has links)
Zirconium- and tantalum-based diborides, and diboride/carbide composites are of interest for ultra-high temperature applications requiring improved thermomechanical and thermochemical stability. This thesis focuses on the synthesis, processing and sintering of nanocrystalline powders with Zr- and Ta-based diboride/carbide/silicide compositions. A solution-based processing method was developed to prepare reactive mixtures that were precursors for ZrB₂-based powders. The precursors reacted to form the ceramic powders after suitable pyrolysis and borothermal/carbothermal reduction heat treatments. Single-phase ZrB₂ powders were prepared with initial composition of C/Zr = 4.8 and B/Zr = 3.0. ZrB₂-based composite powders with ZrC, ZrO₂, TaB₂, TaC, SiC, TaSi₂ and B₄C were prepared with particle sizes of 10-500 nm for different phases based SEM micrographs. The composite powders were highly sinterable with proper processing methods developed to avoid and remove oxide impurities. The relative densities of ZrB₂/B₄C, ZrB₂/TaB₂, ZrB₂/TaB₂/B4C, ZrB₂/TaSi₂ were in the range of 91%-97% after pressureless sintering at 2020 ℃
for 1 h or 30 min.
|
9 |
Continuous flow synthesis of lead sulfide and copper indium diselenide nanocrystalsKnapp, Michael W. 15 June 2012 (has links)
The use of size and shape tunable quantum confinement nanocrystals has many potential applications for use in semiconductors, optics and sensors. The synthesis of lead sulfide (PbS) and copper indium diselenide (CuInSe���) nanoparticles are of particular interest for use in semiconductor, optoelectronics and bio-medical applications.
The continuous synthesis of lead sulfide (PbS) and copper indium diselenide (CuInSe���) nanocrystals was undertaken in this work. Quality colloidal nanocrystal synthesis requires three components: precursors, organic surfactants and solvents. The synthesis of the nanocrystals can be thought of as a nucleation event, followed by a subsequent growth period. Both the nucleation and growth rates were found to be dependent upon factors such as temperature, growth time, and precursor concentration. For a continuous flow system the residence time (at nucleation and growth conditions) was also found to be important. In order to separate the nucleation and growth events, injection techniques were employed to achieve rapid nucleation of nanocrystals with final size dictated by the growth temperature and/or residence time through the growth zone of the reaction system.
Experimental parameters to investigate the size, shape, and composition of synthesized nanocrystals included injection temperature, growth temperature,
residence time, and concentration of organic surfactants. Size tunability was accomplished for both PbS and CuInSe��� nanocrystals where particle sizes less than 10 nm were achieved and the resulting nanocrystal compositions were found to be at the approximate stoichiometric ratios for both PbS and CuInSe���. The materials used for the process tubing and pumps were found to be important as chlorinated reaction byproducts were found to react with the stainless steel tubing and pump heads. Post processing was also found to be important in order to remove any possible reaction by-products and residual precursors from the surface of synthesized nanocrystals.
When at least one dimension of the nanocrystal approaches the exciton Bohr radius, the bandgap for the nanocrystal increases. UV-VIS spectroscopy was used to optically characterize synthesized PbS nanocrystals from our continuous flow synthesis. The absorption spectra for the particles demonstrated an absorption onset showing a large blueshift compared to that of bulk PbS. The blueshift matches closely with literature reports of the quantum confinement effect that would be desired when synthesizing PbS nanoparticles at diameters that are less than the PbS exciton Bohr radius of 18 nm. / Graduation date: 2013
|
10 |
Synthesis of colloidal metal oxide nanocrystals and nanostructured surfaces using a continuous flow microreactor system and their applications in two-phase boiling heat transferChoi, Chang-Ho 04 March 2013 (has links)
Metal oxide nanocrystals have attracted significant interests due to their unique chemical, physical, and electrical properties which depend on their size and structure. In this study, a continuous flow microreactor system was employed to synthesize metal oxide nanocrystals in aqueous solution. Assembly of nanocrystals is considered one of the most promising approaches to design nano-, microstructures, and complex mesoscopic architectures. A variety of strategies to induce nanocrystal assembly have been reported, including directed assembly methods that apply external forces to fabricate assembled structures.
In this study ZnO nanocrystals were synthesized in an aqueous solution using a continuous flow microreactor. The growth mechanism and stability of ZnO nanocrystals were studied by varying the pH and flow conditions of the aqueous solution. It was found that convective fluid flow from Dean vortices in a winding microcapillary tube could be used for the assembly of ZnO nanocrystals. The ZnO
nanocrystal assemblies formed three-dimensional mesoporous structures of different shapes including a tactoid, a retangle and a sphere. The assembly results from a competing interaction between electrostatic forces caused by surface charge of nanocrystals and collision of nanocrystals associated with Dean vortices. The as synthesized colloidal ZnO nanocrystals or assembly were directly deposited onto a substrate to fabricate ZnO nanostructured surfaces. The rectangular assembly led to flower-like ZnO nanostructured films, while the spherical assembly resulted in amorphous ZnO thin film and vertical ZnO nanowire (NW) arrays. In contrast to the formation of flower structure or amorphous thin film, only colloidal ZnO nanocrystals were used as the building blocks for forming vertical ZnO NW arrays. This study demonstrates the versatility of the microreactor-assisted nanomaterial synthesis and deposition process for the production of nanostrucuturesres with various morphologies by tuning the physical parameters while using the same chemical precursors for the synthesis.
ZnO flower structure was coated on a microwick structure to improve the capillary flow. The coated microwick structure showed an enhanced capillary rise, which was attributed to the hydrophilic property and geometrical modification of ZnO nanostructure. Two-phase boiling heat transfer was performed using ZnO nanostructured surfaces. ZnO nanocoating altered the important characteristics including surface roughness and wettability. Hydrophilic nature of the ZnO nanocoating generally enhanced the boiling heat transfer performance, resulting in higher heat transfer coefficient (HTC), higher critical heat flux (CHF), and lower surface superheat comparing to the bare surface. Octahedral SnO and porous NiO
films, fabricated by a continuous flow microreactor system, were suggested as potential boiling surfaces for the high porosity and irregularity of their structures. / Graduation date: 2013
|
Page generated in 0.0931 seconds