Indiana University-Purdue University Indianapolis (IUPUI) / This study represents a cost-effective method to advance the physical and mechanical properties of carbon fiber-reinforced polymer (CFRP) prepreg composite materials, where electrospun multiwalled carbon nanotubes (CNTs)/epoxy nanofibers fabricated and deposited in between the layers of traditional CFRP prepreg composite. CNT-aligned epoxy nanofibers were uniformly formed by an optimized electrospinning method. Electrospinning is considered one of the most flexible, low-cost, and globally recognized methods for generating continuous filaments from submicron to tens of nanometer diameter. Nanofilaments were incorporated precisely on the layers of prepreg to accomplish increased adhesion and interfacial bonding, leading to increased strength and enhancements in more mechanical properties. As a result, the modulus of the epoxy and CNT/epoxy nanofibers were revealed to be 3.24 GPa and 4.84 GPa, leading to 49% enhancement. Furthermore, interlaminar shear strength (ILSS) and fatigue performance at high-stress regimes improved by 29% and 27%, respectively. Barely visible impact damage (BVID) energy improved considerably by up to 45%. The thermal and electrical conductivities were also increased considerably because of the highly conductive CNT networks present in between the CFRP layers. The newly introduced approach was able to deposit high content uniform CNTs at the ply interface of prepregs to enhance the CFRP properties, that has not been achieved in the past because of the randomly oriented high viscosity CNTs in epoxy resins.

This study represents a cost-effective method to advance the physical and mechanical properties of carbon fiber-reinforced polymer (CFRP) prepreg composite materials, where electrospun multiwalled carbon nanotubes (CNTs)/epoxy nanofibers fabricated and deposited in between the layers of traditional CFRP prepreg composite. CNT-aligned epoxy nanofibers were uniformly formed by an optimized electrospinning method. Electrospinning is considered one of the most flexible, low-cost, and globally recognized methods for generating continuous filaments from submicron to tens of nanometer diameter. Nanofilaments were incorporated precisely on the layers of prepreg to accomplish increased adhesion and interfacial bonding, leading to increased strength and enhancements in more mechanical properties. As a result, the modulus of the epoxy and CNT/epoxy nanofibers were revealed to be 3.24 GPa and 4.84 GPa, leading to 49% enhancement. Furthermore, interlaminar shear strength (ILSS) and fatigue performance at high-stress regimes improved by 29% and 27%, respectively. Barely visible impact damage (BVID) energy improved considerably by up to 45%. The thermal and electrical conductivities were also increased considerably because of the highly conductive CNT networks present in between the CFRP layers. The newly introduced approach was able to deposit high content uniform CNTs at the ply interface of prepregs to enhance the CFRP properties, that has not been achieved in the past because of the randomly oriented high viscosity CNTs in epoxy resins.

Aims: Limbal stem cell (LSC) deficiency is one of the most challenging ocular surface diseases. The aim of this thesis was to study damaged ocular surface reconstruction. Therefore, a mouse model of limbal transplantation was estab- lished. Furthermore, LSC isolation, transfer of LSCs and bone marrow-derived mesenchymal stem cells (MSCs) on nanofiber scaffolds were studied. Material and methods: Syngeneic, allogeneic and xenogeneic (rat) limbal grafts were transplanted orthotopically into BALB/c mice. Graft survival, immune re- sponse and the effect of monoclonal antibodies (mAb) (anti-CD4 and anti-CD8 cells) were analyzed. Mouse LSCs were separated by Percoll gradient; subse- quently, they were analyzed for the presence of LSC and differentiation corneal epithelial cell markers and characteristics using real-time PCR and flow cytom- etry. Nanofiber scaffolds seeded with LSCs and MSCs were transferred onto the damaged ocular surface in mouse and rabbit models. Cell growth on scaffolds, post-operative inflammatory response and survival of transferred cell were ana- lyzed. Results: Limbal allografts were rejected promptly by the Th1-type of immune response (IL-2, IFN-γ) involving CD4+ cells and nitric oxide produced by macro- phages, contrary to the prevailing Th1 and Th2 immune responses (IL-4, IL-10) in...

Experimental models of a transfer of stem cells for therapeutic purposes Abstract Stem cell therapy currently represents a standard procedure of treating a wide variety of hereditary diseases and serious injuries. Development of the most suitable way of transfer of stem cells into the patient body remains very important question concerning this type of therapy. In our experiments we used nanofiber scaffolds for stem cell cultivation and their subsequent transfer. These nanofibers were prepared by the original needleless electrospun NanospiderTM technology. Allogeneic cornea or skin graft were transplanted from B6 mice to BALB/c mice. The grafts were covered by a nanofibrous scaffold with cultivated stem cells. Stem cells were stained by an imunofluorescent dye to enable us to monitore their migration from nanofibers into tissues and consequent distribution in the body and characterize changes of this distribution in the time. The methods of ELISA and PCR were used to confirm that mesenchymal stem cells support the production of antiinflammatory cytokines IL-4 and IL-10 and contribute to inhibition of production of proinflammatory cytokines IL-1, IFNγ and inducible nitric oxide synthase. We confirmed an important beneficial role of nanofiber scaffolds in transplantation of mesenchymal stem cells. Nanofiber...

Aims: Limbal stem cell (LSC) deficiency is one of the most challenging ocular surface diseases. The aim of this thesis was to study damaged ocular surface reconstruction. Therefore, a mouse model of limbal transplantation was estab- lished. Furthermore, LSC isolation, transfer of LSCs and bone marrow-derived mesenchymal stem cells (MSCs) on nanofiber scaffolds were studied. Material and methods: Syngeneic, allogeneic and xenogeneic (rat) limbal grafts were transplanted orthotopically into BALB/c mice. Graft survival, immune re- sponse and the effect of monoclonal antibodies (mAb) (anti-CD4 and anti-CD8 cells) were analyzed. Mouse LSCs were separated by Percoll gradient; subse- quently, they were analyzed for the presence of LSC and differentiation corneal epithelial cell markers and characteristics using real-time PCR and flow cytom- etry. Nanofiber scaffolds seeded with LSCs and MSCs were transferred onto the damaged ocular surface in mouse and rabbit models. Cell growth on scaffolds, post-operative inflammatory response and survival of transferred cell were ana- lyzed. Results: Limbal allografts were rejected promptly by the Th1-type of immune response (IL-2, IFN-γ) involving CD4+ cells and nitric oxide produced by macro- phages, contrary to the prevailing Th1 and Th2 immune responses (IL-4, IL-10) in...

D. Tech. (Department of Biotechnology and Chemistry, Faculty of Applied and Computer Sciences), Vaal University of Technology. / The synthesis of Ag and Cu nanoparticles was carried out using the thermal decomposition method in the presence of oleylamine as a capping agent. This method was used because it can produce uniform and monodisperse nanoparticles with controlled size distribution. The nanoparticles synthesized under various conditions were characterized by transmission electron microscopy (TEM), UV/Vis spectroscopy, photoluminescence spectroscopy (PL), and X-ray diffraction (XRD). The effect of precursor concentration on the morphology and size of the nanoparticles was investigated. It was observed that an increase in the precursor concentration resulted in an increase in particle sizes with different morphologies for both Ag and Cu nanoparticles. The increase in particle sizes for Ag nanoparticles was due to Ostwald ripening, while for Cu nanoparticles it was due to agglomeration, as Cu tends to oxidize in the atmosphere, leading to a change in particle size and shape. However, the ability to control and manipulate their physical and chemical properties depends on tuning their size and shape. Therefore, varying the precursor concentration helped in selecting the optimal concentration for this study. The nanoparticles produced were used in another study as fillers or additives for the production of nanofiber composites. The development of nanofibers by electrospinning process has led to potential applications in filtration, tissue engineering scaffolds, drug delivery, wound dressing and etc. The current study is an attempt to fabricate composite nanofibers that can be used as wound dressing material for effective wound healing. The approach involves the blending of two different polymers both being biocompatible and biodegradable were one is a natural polymer and the other is a synthetic polymer. In this study, different weight ratios of CS/PVA blends, Ag/Cu/CS/PVA, Ag/CS/PVA and Cu/CS/PVA composite fibers have been successfully prepared by the electrospinning process. The tip-to-collector distance was kept at 15 cm and the applied voltage was varied from 15 to 25 kV. The effects of the weight ratios applied voltage and the nanoparticles loading on the morphology and diameter of the fibers were investigated. The resultant fibers were characterized using scanning electron microscopy (SEM), XRD, Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric analysis (TGA) and UV-Vis spectroscopy. The SEM results showed that an increase the amount of chitosan in the CS/PVA blend resulted in a decrease in the fiber diameters while an increase in the voltage from 15 to 25 kV led to a decrease in the fiber diameters. Furthermore, an increase in fiber diameters was observed with irregular morphologies upon addition of Ag/Cu nanoparticles into the blend. The latter changes are perceived to be as a result of an increased conductivity and a higher charge density. The XRD results showed peaks which correspond to Ag in the face centred cubic. Ag peaks are more dominant than Cu peaks in the XRD of the mixed nanoparticles. The FTIR spectra of the Ag/Cu/CS/PVA composite fibers gave almost identical features as the blend. This proves that there was an interaction between CS and PVA polymer due to intermolecular hydrogen bonding. The TGA curves showed no significant effect on the thermal stability of the composite fibers upon addition of different nanoparticles loadings. The absorption spectra of the composite fibers showed an improved optical properties compared to the blend. For Ag and Cu nanoparticles composite fibers it was observed that addition of Ag nanoparticles in the blend resulted in an increase in fiber diameters with uniform morphology whereas for Cu resulted in a decrease in fiber diameters. Both Ag and Cu composite fibers showed an improved optical properties. The effect of CS/PVA, Ag/Cu, Ag, and Cu nanofibers on the selected microorganism (K.pneumoniae, S. aureus, P. aeruginosa, and E.coli) was evaluated using the disk diffusion method. It was observed that Ag/Cu/CS/PVA composite fibers showed greater activity against all microorganisms compared to Ag and Cu composite fibers. The alamar blue and Pierce Lactase dehydrogenase (LDH) assay were used to assess the effect of the blend and the composite fibers on cell viability and cytotoxicity, respectively. The results show that the prepared blend and the composite fibers did not have any toxic effect on human adipose derived stem cells (hADSC). The results also showed that as the concentration of Ag/Cu nanoparticles was increased the viability of the cells also increased after 24 hour incubation. More proliferation was observed in day 1 compared to day 3. The 30/70 blend showed more viable cell compared to the negative control. For Ag and Cu composite fibers the 30/70 CS/PVA blend increased cell proliferation after 3 days with 17% more viable cells compared to the negative control. These results show that the prepared blend with its composite fibers are biocompatible with human (ADSC) and may be suitable for use in biomedical application such as wound dressing.