In the rubber industry, plasticizers for rubber compounds mainly consist of petroleum derivatives. Consequently, the rubber industry is in constant competition with many petroleum consumers. This competition places an economic strain on rubber companies such as HEXPOL RUBBER COMPOUNDING L.L.C. In order to alleviate this strain, natural oil alternatives to petroleum plasticizers are of novel research interest and are investigated in this thesis project.

The bidentate ligand 1,2-bis(ditertbutylphosphinomethyl)benzene has been shown to be a very efficient catalyst for operating the alkoxycarbonylation of alkenes and unsaturated esters and carboxylic acids giving a very high selectivity to the linear product with very few exceptions to this general rule. Due to the increasing prices of petroleum feedstock and petroleum-derived chemicals, the preparation of chemicals starting from renewable resources and waste products from the industry becomes an interesting alternative. Fatty acids and fatty esters, due to the existence of one or more unsaturation in their alkyl chain are subjected to the alkoxycarbonylation reactions in presence of 1,2-bis(ditertbutylphosphinomethyl)benzene, palladium, methane sulfonic acid, carbon monoxide and methanol, yielding diesters with a long carbon chain (up to 19 carbon atoms). The diesters are shown to be readily prepared from unpurified olive, rapeseed or sunflower oils as well as from tall oil. In the last case triesters are also formed. The diesters are subjected to hydrogenation in the presence of 1,1,1-tris(diphenylphosphinomethyl)ethane, ruthenium and hydrogen, in a mixture of dioxane and water at high temperature, yielding the corresponding diols. The resulting products of the reactions are monomers for preparing polyesters having the potential to replace some existing petroleum-based polymers (for instance polyethylene). The aminocarboxylation reaction in the presence of the same palladium/1,2-bis(ditertbutylphosphinomethyl) benzene catalyst, in the presence of aniline, 2{naphthol and potassium iodide in diethylether, is employed for preparing esteramides, which are subjected to hydrogenation. Aromatic polyamides are prepared by melting together an aromatic diamine and diacids obtained from methoxycarbonylation. Finally, N-Heterocyclic Carbene (NHC) ligands are employed for preparing new palladium complexes which are used in the Suzuki-Miyaura cross-coupling reaction in a water/isopropanol mixture. Other complexes based on copper are employed for developing an inexpensive transmetallation reaction for transferring a NHC ligand from copper to palladium and gold.

Submitted by Jorge Silva (jorgelmsilva@ufrrj.br) on 2017-05-10T18:44:51Z No. of bitstreams: 1 2012 - Juliana Grilo Teixeira.pdf: 1403933 bytes, checksum: f46fcf906856bd295558a650d77c9ac0 (MD5) / Made available in DSpace on 2017-05-10T18:44:51Z (GMT). No. of bitstreams: 1 2012 - Juliana Grilo Teixeira.pdf: 1403933 bytes, checksum: f46fcf906856bd295558a650d77c9ac0 (MD5) Previous issue date: 2012-02-29 / CAPES / The use of wood originated reforestation undergo a preservative treatment is becoming increasingly common for the replacement of native woods with high natural durability. However, the use of chemicals traditionally used in wood preservatives, has suffered severe restrictions against more restrictive environmental laws. Thus, it becomes extremely necessary to seek new products and preservative treatments that have low toxicity to humans and low environmental impact. This study aimed to evaluate the chemical and thermal treatment of the wood of Pinus caribaea Morelet from the using of natural products from Nim Oil, candle terpenes and bisabolol resin, besides the combination of these last two to the ratio of 1:1. The products were used in concentrations of 5 and 50%. The temperature of the wood grinding was performed using a thermal camera of the temperatures 150 and 170 ? C for a period of 2 to 3 hours, the treated wood The durability was evaluated freight exposure of these to attack by wood decay fungi, white rot (Trametes versicolor) and brown rot (Postia placenta, Neolentinus lepideus). For comparison, samples of untreated wood and treated with CCA and CCB were exposed to the same types of wood decay fungi. The wood samples used were taken from the region near the bone and also near the bark, to evaluate the effect of radial variation of wood in chemical and thermal treatment. The effectiveness of each treatment was determined by calculating the weight loss occurring after the biodegradation test. The results showed that for the heat treatment, the weight loss after the attack of fungi, decreases with increasing temperature and exposure time. Despite the improvement in the thermal treatment was not efficient in preventing fungal attack coming reach values of mass loss equal to or higher than those found for untreated wood. For the treatments carried out with natural products were statistically significant improvements in relation to weight loss. The 50% concentration showed the best result for all products, especially when using the wood of the region near the shell. According to ASTM D - 2017 (2005), all natural products used gave improvement in durability of the wood, which may be classified after treatment as resistant and highly resistant. Technically, natural products studied have the potential to replace the chemicals traditionally used in wood preservatives used on spools. / A utiliza??o de madeiras oriundas de reflorestamentos submetidas a um tratamento preservativo vem se tornando cada vez mais comum para a substitui??o das madeiras nativas com elevada durabilidade natural. Entretanto, o uso de produtos qu?micos, tradicionalmente utilizados na preserva??o da madeira, vem sofrendo severas restri??es face ?s legisla??es ambientais cada vez mais restritivas. Dessa forma, torna-se extremamente necess?rio a busca de novos produtos e tratamentos preservativos que apresentem baixa toxicidade ao homem e baixo impacto ambiental. Esse trabalho teve como objetivo avaliar o tratamento qu?mico e o tratamento t?rmico da madeira de Pinus caribaea Morelet a partir da utiliza??o dos produtos naturais ?leo de nim, terpenos de candeia e resina de bisabolol, al?m da combina??o destes dois ?ltimos na rela??o de 1:1. Os produtos foram utilizados nas concentra??es de 5 e 50 %. A retifica??o t?rmica da madeira foi realizada numa c?mara t?rmica utilizando-se as temperaturas de 150 e 170oC por um per?odo de 2 e 3 horas. A durabilidade da madeira tratada foi avaliada frente ? exposi??o destas ao ataque de fungos xil?fagos de podrid?o branca (Trametes versicolor) e podrid?o parda (Postia placenta, Neolentinus lepideus). Para efeito de compara??o, amostras de madeiras n?o tratadas e tratadas com Arseniato de Cobre Cromatado (CCA) e Borato de Cobre Cromatado (CCB) foram expostas aos mesmos tipos de fungos xil?fagos. As amostras de madeiras utilizadas foram retiradas da regi?o pr?xima ? medula e pr?xima ? casca, visando avaliar o efeito da varia??o radial da madeira nos tratamentos. A efici?ncia de cada tratamento foi determinada pelo c?lculo da perda de massa ocorrida ap?s o ensaio de biodeteriora??o. No tratamento t?rmico, a perda de massa, ap?s o ataque dos fungos, decresce com o aumento da temperatura e do tempo de exposi??o. Apesar dessa melhora, o tratamento t?rmico n?o se mostrou eficiente na preven??o do ataque dos fungos chegando a atingir valores de perda de massa igual ou superior aquelas encontradas para a madeira n?o tratada. Para os tratamentos realizados com os produtos naturais houve melhoras estatisticamente significativas no que se refere ? perda de massa. A concentra??o 50 % foi a que apresentou o melhor resultado para todos os produtos, especialmente quando se utilizou a madeira da regi?o pr?xima a casca. De acordo com a ASTM D - 2017 (ASTM, 2005), todos os produtos naturais utilizados conferiram melhoria na durabilidade da madeira, a qual p?de ser classificada ap?s o tratamento como resistente e altamente resistente. Tecnicamente, os produtos naturais estudados apresentam potencial para substitui??o dos produtos qu?micos tradicionalmente utilizados na preserva??o de madeira.

In pharmaceutical sciences, topical delivery is a transport process of an active pharmaceutical ingredient (API) from a formulated dosage form to the target site of action. For most topical delivery systems, the skin surface, or the specific skin layers, such as the outermost layer of the stratum corneum, the lipids amid the corneocytes within the stratum corneum, the corneocytes themselves, the epidermis, dermis, Langerhans cells, Merckle cells or the appendageal structures can be the target delivery location. When an API is delivered to the skin, it has to firstly diffuse from the formulation in which it is applied, to the skin surface. From there the API may partition into the stratum corneum, permeate across the stratum corneum and partition into the viable epidermis, from where it may partition further into the dermis and permeate across the dermis into the bloodstream (Wiechers, 2008:1-3, 7). With respect to the barrier function of the skin, the intercellular spaces within the stratum corneum contain lipids and its main purpose is to operate as a barrier to water-loss and to provide an imperative diffusional barrier to the absorption of APIs. This resistance is comprised of a complex interaction of lipids that creates a hydrophilic and lipophilic penetration pathway. The fundamental aspect underlying the impermeability of the skin, therefore, is the lipophilic nature of the stratum corneum (Bouwstra et al., 2003:4; Franz & Lehman, 2000:25; Walker & Smith, 1996:296). A common approach for the promotion of poorly penetrating APIs in transdermal delivery is the incorporation of chemical penetration enhancers in delivery systems, in order to promote the partitioning of an API into the stratum corneum. These chemicals are also referred to as accelerants, promoters and absorption promoters. Penetration enhancers are added to topical formulations and usually also partition into the stratum corneum, where they temporarily and reversibly disrupt its fundamental diffusional barrier properties, hence facilitating the absorption of an API through the skin (Büyüktimkin et al., 1997:358-359; Sinha & Kaur, 2000:1131; Walker & Smith, 1996:296). The mechanisms for the enhancement of diffusion of the API should therefore increase the solubility and partitioning of the drug from the formulation into the skin. It should further increase the solubility of the API within the skin and promote its permeability and diffusion coefficient (Rajadhyaksha et al., 1997:489). Fatty acids are recognised to effectively enhance the penetration of transdermally delivered hydrophilic and lipophilic APIs. Many penetration enhancers contain saturated and unsaturated hydrocarbon chains, and a popular fatty acid that has been used in this regard is oleic acid (Williams & Barry, 2004:609-610). It is believed that fatty acids disrupt the lipid organisation of the intercellular lipids within the stratum corneum to cause fluidisation of these bilayers, making the stratum corneum more permeable to APIs. Excipients with polar (hydrophilic) head groups and long hydrophobic chains i.e. fatty acids, can penetrate into the intercellular lipids of the stratum corneum and disrupt these endogenous lipid components, thereby increasing diffusion of an API within the skin (Barry, 2006:9-10; Hadgraft & Finnin, 2006:367-368; Kanikkannan et al., 2006:18; Williams & Barry, 2004:610). Natural oils are widely used in topical formulations and were an obvious choice in this study. Oils are liquids at room temperature, whereas fats are in solid form. They are relatively easy to obtain from both plants and animals. The main constituents of fats and oils are triglycerides comprising of fatty acids and a glycerol. Oils control the evaporation of moisture from the skin, spread easily and evenly and are partly metabolised in the skin to release valuable fatty acids (Fang et al., 2004:170,173; Lautenschläger, 2004:46; Mitsui, 1997:121-122). The focus of this study was not formulation per se, but included the formulation of avocado-, grapeseed-, emu-, crocodile, olive and coconut oil into semisolid emulgel- and two foam formulations. This was done in order to investigate the penetration enhancing properties of their fatty acid content on flurbiprofen which was chosen as the marker API. The emulgels containing the natural oils were compared to the same emulgel formulation containing liquid paraffin, and a hydrogel without the inclusion of an oil. Six natural oils were analysed by gas chromatography (GC) in order to quantify their fatty acid compositions, whilst also providing qualitative information by indicating the retention times of the materials with an alkyl chain composition (Mitsui, 1997:260). Data obtained with the GC indicated that olive- (76%), avocado- (68%), emu- (46%) and crocodile oil (40%) presented with high levels of oleic acid, also known as a mono-unsaturated fatty acid (MUFA). Lower levels of oleic acid were observed within grapeseed- (27%) and coconut oil (8%). The only oil demonstrating high levels of the poly-unsaturated fatty acid (PUFA), linoleic acid, was grapeseed oil (61%), whereas the remainder of the oils showed levels below 24%. Contrary, coconut oil seemed to have been the only oil high in saturated fatty acids (SFAs) and consisted of a lauric acid content of 52% and medium levels of myristic acid (21%). Average levels of palmitic acid (SFA) were found in crocodile- (21%) and in emu oil (21%), both of animal origin, whereas avocado-, grapeseed-, olive- and coconut oils from plants presented with levels below 15%. Stearic acid was also present in levels below 10% in all of these oils, with the oils of animal origin portraying the highest values. A method was developed and validated to determine the concentration of the marker flurbiprofen after diffusion from the formulations into the skin, as well as concentrations of the marker that diffused through the skin, by means of high performance liquid chromatography (HPLC). Franz cell membrane diffusion studies were conducted prior to the skin diffusion studies in order to verify the actual release of the marker from the semisolid formulations. Skin diffusion experiments were performed using dermatomed excised, human skin to which the six emulgel formulations, containing the natural oils, were applied. A comparative study was performed utilising liquid paraffin and a hydrogel, in order to compare the diffusion of the marker, flurbiprofen, into and through the skin. The two oil emulgel formulations that had indicated the best flux values were subsequently formulated into foam preparations in order to compare the penetration enhancement properties on flurbiprofen of these two oils in a foam preparation, to those in the equivalent emulgels. The data generated for all ten the formulations were compared, and the formulations that yielded the best results with regards to median flux values and the flurbiprofen concentrations within the stratum corneum-epidermis and epidermis-dermis, were identified. Application of the liquid paraffin emulgel (21.29 μg/ml) depicted the highest average concentration of the diffused lipophilic flurbiprofen within the stratum corneum-epidermis, followed by the olive oil foam (21.47 μg/ml), olive oil emulgel (17.82 μg/ml) and grapeseed oil emulgel (17.78 μg/ml). Very similar concentrations for the marker were demonstrated by the hydrogel (16.73 μg/ml) and crocodile oil emulgel (14.89 μg/ml), whereas a lower concentration was shown for coconut oil emulgel (7.18 μg/ml). The remainder of the formulations yielded concentrations below 3%, i.e. the avocado oil emulgel (2.72 μg/ml), the coconut oil foam (1.57 μg/ml) and finally the emu oil emulgel (1.25 μg/ml). The penetration of the marker, flurbiprofen, being trapped within the skin seemed to have been enhanced more by the oleic acid (UFA) containing emulgels and foam, especially. This was followed by oils containing high linoleic acid values, which indicated that the more kinked shaped the fatty acids, the more difficult it became to insert themselves within the lipid structures of the stratum corneum, with a resulting accumulation of the marker (Fang et al., 2003:318-319). It therefore seemed that those oils that predominantly consisted of unsaturated fatty acids (UFAs) (grapeseed-, crocodile- and olive oils) seemed to have increased the concentration of the diffused marker more significantly than those oils containing an almost even combination of MUFAs and PUFAs (avocado oil), or those mainly consisting of SFAs (coconut oil). Average concentrations of the diffused flurbiprofen found in the epidermis-dermis region of the skin for all of the formulations demonstrated low concentrations, ranging between 0.97 - 5.39 μg/ml, with the exception of the emu oil emulgel that presented with a higher concentration of 16.15 μg/ml. The reason for the high accumulation of the marker might have been as a result of epidermal proliferation, with subsequent accumulation of the marker within the epidermis-dermis due to high oleic- and linoleic acid values, as well as small amounts of palmitoleic acid present within this oil (Katsuta et al., 2005:1011). The resistance of the epidermis-dermis region to the general permeation of flurbiprofen might have been caused by its lipophilic nature, resulting in a reduced solubility within the hydrophilic environment of this region (Hadgraft, 1999:5). Median results from the skin diffusion studies demonstrated that the hydrogel (23.79 μg/cm2.h) had the highest flux, followed by the olive oil- (17.99 μg/cm2.h), liquid paraffin- (15.70 μg/cm2.h), coconut oil- (13.16 μg/cm2.h), grapeseed oil- (11.85 μg/cm2.h), avocado oil- (8.31 μg/cm2.h), crocodile oil- (6.68 μg/cm2.h) and emu oil emulgels (4.41 μg/cm2.h). The fact that the hydrogel presented a higher flux value for the marker could have been as a result of its high water content that had caused hydration of the skin. Hydration opens up the dense lipid structures inside of the stratum corneum, due to swelling of the corneocytes, with a subsequent increase in the marker‘s flux (Benson, 2005:28; Ranade & Hollinger, 2004:213). The high flux value of flurbiprofen with the liquid paraffin emulgel might also have resulted from the fact that it occluded the skin, which increased the hydration of the stratum corneum, with a subsequent increase in the flux (Mitsui, 1997:124; Thomas & Finnin, 2004:699). Results from the skin diffusion studies could be explained by the fact that the fatty acids differ in their hydrocarbon chain by (1) the length of the chain, and (2) the position- and number of the double bonds (Babu et al., 2006:144). It is suggested that fatty acids with hydrocarbon (lipophilic) chains between C12 to C14 (also present within coconut oil) have an optimal balance of the partition coefficient and its affinity for the skin (Ogiso & Shintani, 1990:1067). It appears as though the branched UFAs, especially oleic acid, present in high quantities in olive oil, were more powerful enhancers of the diffusion of the marker, flurbiprofen (Chi et al., 1995:270). Foam formulations were manufactured with the olive- and coconut oil emulgels that had demonstrated the best median flux values of flurbiprofen from the natural oil emulgel formulations. These formulated foams, however, did not significantly increased flux values for flurbiprofen through the skin, but only achieved values of 5.56 μg/cm2.h for the olive oil foam and 4.36 μg/cm2.h for the coconut oil foam formulations. The low flux values could have been attributed to the nature of the formulation itself, which was filled with trapped air that could have resulted in the formulation not making optimal direct contact with the available skin surface. Throughout this study, it became evident that olive oil, predominantly consisting of oleic acid (UFA), was most effective in enhancing the flux of the lipophilic marker, flurbiprofen, through the skin, closely followed by coconut oil consisting of SFAs, with lauric- and myristic acid as its main constituents. Better enhancement effects were observed with those oils containing high amounts of oleic acid (MUFA), than oils consisting of almost equal amounts of both PUFAs and MUFAs (avocado-, emu- and crocodile oil), or oils mainly consisting of PUFAs (grapeseed oil) as its main components, but their effect was not more significant than the oil containing SFAs (coconut oil) as its key components. / Thesis (MSc (Pharmaceutics))--North-West University, Potchefstroom Campus, 2013.

In pharmaceutical sciences, topical delivery is a transport process of an active pharmaceutical ingredient (API) from a formulated dosage form to the target site of action. For most topical delivery systems, the skin surface, or the specific skin layers, such as the outermost layer of the stratum corneum, the lipids amid the corneocytes within the stratum corneum, the corneocytes themselves, the epidermis, dermis, Langerhans cells, Merckle cells or the appendageal structures can be the target delivery location. When an API is delivered to the skin, it has to firstly diffuse from the formulation in which it is applied, to the skin surface. From there the API may partition into the stratum corneum, permeate across the stratum corneum and partition into the viable epidermis, from where it may partition further into the dermis and permeate across the dermis into the bloodstream (Wiechers, 2008:1-3, 7). With respect to the barrier function of the skin, the intercellular spaces within the stratum corneum contain lipids and its main purpose is to operate as a barrier to water-loss and to provide an imperative diffusional barrier to the absorption of APIs. This resistance is comprised of a complex interaction of lipids that creates a hydrophilic and lipophilic penetration pathway. The fundamental aspect underlying the impermeability of the skin, therefore, is the lipophilic nature of the stratum corneum (Bouwstra et al., 2003:4; Franz & Lehman, 2000:25; Walker & Smith, 1996:296). A common approach for the promotion of poorly penetrating APIs in transdermal delivery is the incorporation of chemical penetration enhancers in delivery systems, in order to promote the partitioning of an API into the stratum corneum. These chemicals are also referred to as accelerants, promoters and absorption promoters. Penetration enhancers are added to topical formulations and usually also partition into the stratum corneum, where they temporarily and reversibly disrupt its fundamental diffusional barrier properties, hence facilitating the absorption of an API through the skin (Büyüktimkin et al., 1997:358-359; Sinha & Kaur, 2000:1131; Walker & Smith, 1996:296). The mechanisms for the enhancement of diffusion of the API should therefore increase the solubility and partitioning of the drug from the formulation into the skin. It should further increase the solubility of the API within the skin and promote its permeability and diffusion coefficient (Rajadhyaksha et al., 1997:489). Fatty acids are recognised to effectively enhance the penetration of transdermally delivered hydrophilic and lipophilic APIs. Many penetration enhancers contain saturated and unsaturated hydrocarbon chains, and a popular fatty acid that has been used in this regard is oleic acid (Williams & Barry, 2004:609-610). It is believed that fatty acids disrupt the lipid organisation of the intercellular lipids within the stratum corneum to cause fluidisation of these bilayers, making the stratum corneum more permeable to APIs. Excipients with polar (hydrophilic) head groups and long hydrophobic chains i.e. fatty acids, can penetrate into the intercellular lipids of the stratum corneum and disrupt these endogenous lipid components, thereby increasing diffusion of an API within the skin (Barry, 2006:9-10; Hadgraft & Finnin, 2006:367-368; Kanikkannan et al., 2006:18; Williams & Barry, 2004:610). Natural oils are widely used in topical formulations and were an obvious choice in this study. Oils are liquids at room temperature, whereas fats are in solid form. They are relatively easy to obtain from both plants and animals. The main constituents of fats and oils are triglycerides comprising of fatty acids and a glycerol. Oils control the evaporation of moisture from the skin, spread easily and evenly and are partly metabolised in the skin to release valuable fatty acids (Fang et al., 2004:170,173; Lautenschläger, 2004:46; Mitsui, 1997:121-122). The focus of this study was not formulation per se, but included the formulation of avocado-, grapeseed-, emu-, crocodile, olive and coconut oil into semisolid emulgel- and two foam formulations. This was done in order to investigate the penetration enhancing properties of their fatty acid content on flurbiprofen which was chosen as the marker API. The emulgels containing the natural oils were compared to the same emulgel formulation containing liquid paraffin, and a hydrogel without the inclusion of an oil. Six natural oils were analysed by gas chromatography (GC) in order to quantify their fatty acid compositions, whilst also providing qualitative information by indicating the retention times of the materials with an alkyl chain composition (Mitsui, 1997:260). Data obtained with the GC indicated that olive- (76%), avocado- (68%), emu- (46%) and crocodile oil (40%) presented with high levels of oleic acid, also known as a mono-unsaturated fatty acid (MUFA). Lower levels of oleic acid were observed within grapeseed- (27%) and coconut oil (8%). The only oil demonstrating high levels of the poly-unsaturated fatty acid (PUFA), linoleic acid, was grapeseed oil (61%), whereas the remainder of the oils showed levels below 24%. Contrary, coconut oil seemed to have been the only oil high in saturated fatty acids (SFAs) and consisted of a lauric acid content of 52% and medium levels of myristic acid (21%). Average levels of palmitic acid (SFA) were found in crocodile- (21%) and in emu oil (21%), both of animal origin, whereas avocado-, grapeseed-, olive- and coconut oils from plants presented with levels below 15%. Stearic acid was also present in levels below 10% in all of these oils, with the oils of animal origin portraying the highest values. A method was developed and validated to determine the concentration of the marker flurbiprofen after diffusion from the formulations into the skin, as well as concentrations of the marker that diffused through the skin, by means of high performance liquid chromatography (HPLC). Franz cell membrane diffusion studies were conducted prior to the skin diffusion studies in order to verify the actual release of the marker from the semisolid formulations. Skin diffusion experiments were performed using dermatomed excised, human skin to which the six emulgel formulations, containing the natural oils, were applied. A comparative study was performed utilising liquid paraffin and a hydrogel, in order to compare the diffusion of the marker, flurbiprofen, into and through the skin. The two oil emulgel formulations that had indicated the best flux values were subsequently formulated into foam preparations in order to compare the penetration enhancement properties on flurbiprofen of these two oils in a foam preparation, to those in the equivalent emulgels. The data generated for all ten the formulations were compared, and the formulations that yielded the best results with regards to median flux values and the flurbiprofen concentrations within the stratum corneum-epidermis and epidermis-dermis, were identified. Application of the liquid paraffin emulgel (21.29 μg/ml) depicted the highest average concentration of the diffused lipophilic flurbiprofen within the stratum corneum-epidermis, followed by the olive oil foam (21.47 μg/ml), olive oil emulgel (17.82 μg/ml) and grapeseed oil emulgel (17.78 μg/ml). Very similar concentrations for the marker were demonstrated by the hydrogel (16.73 μg/ml) and crocodile oil emulgel (14.89 μg/ml), whereas a lower concentration was shown for coconut oil emulgel (7.18 μg/ml). The remainder of the formulations yielded concentrations below 3%, i.e. the avocado oil emulgel (2.72 μg/ml), the coconut oil foam (1.57 μg/ml) and finally the emu oil emulgel (1.25 μg/ml). The penetration of the marker, flurbiprofen, being trapped within the skin seemed to have been enhanced more by the oleic acid (UFA) containing emulgels and foam, especially. This was followed by oils containing high linoleic acid values, which indicated that the more kinked shaped the fatty acids, the more difficult it became to insert themselves within the lipid structures of the stratum corneum, with a resulting accumulation of the marker (Fang et al., 2003:318-319). It therefore seemed that those oils that predominantly consisted of unsaturated fatty acids (UFAs) (grapeseed-, crocodile- and olive oils) seemed to have increased the concentration of the diffused marker more significantly than those oils containing an almost even combination of MUFAs and PUFAs (avocado oil), or those mainly consisting of SFAs (coconut oil). Average concentrations of the diffused flurbiprofen found in the epidermis-dermis region of the skin for all of the formulations demonstrated low concentrations, ranging between 0.97 - 5.39 μg/ml, with the exception of the emu oil emulgel that presented with a higher concentration of 16.15 μg/ml. The reason for the high accumulation of the marker might have been as a result of epidermal proliferation, with subsequent accumulation of the marker within the epidermis-dermis due to high oleic- and linoleic acid values, as well as small amounts of palmitoleic acid present within this oil (Katsuta et al., 2005:1011). The resistance of the epidermis-dermis region to the general permeation of flurbiprofen might have been caused by its lipophilic nature, resulting in a reduced solubility within the hydrophilic environment of this region (Hadgraft, 1999:5). Median results from the skin diffusion studies demonstrated that the hydrogel (23.79 μg/cm2.h) had the highest flux, followed by the olive oil- (17.99 μg/cm2.h), liquid paraffin- (15.70 μg/cm2.h), coconut oil- (13.16 μg/cm2.h), grapeseed oil- (11.85 μg/cm2.h), avocado oil- (8.31 μg/cm2.h), crocodile oil- (6.68 μg/cm2.h) and emu oil emulgels (4.41 μg/cm2.h). The fact that the hydrogel presented a higher flux value for the marker could have been as a result of its high water content that had caused hydration of the skin. Hydration opens up the dense lipid structures inside of the stratum corneum, due to swelling of the corneocytes, with a subsequent increase in the marker‘s flux (Benson, 2005:28; Ranade & Hollinger, 2004:213). The high flux value of flurbiprofen with the liquid paraffin emulgel might also have resulted from the fact that it occluded the skin, which increased the hydration of the stratum corneum, with a subsequent increase in the flux (Mitsui, 1997:124; Thomas & Finnin, 2004:699). Results from the skin diffusion studies could be explained by the fact that the fatty acids differ in their hydrocarbon chain by (1) the length of the chain, and (2) the position- and number of the double bonds (Babu et al., 2006:144). It is suggested that fatty acids with hydrocarbon (lipophilic) chains between C12 to C14 (also present within coconut oil) have an optimal balance of the partition coefficient and its affinity for the skin (Ogiso & Shintani, 1990:1067). It appears as though the branched UFAs, especially oleic acid, present in high quantities in olive oil, were more powerful enhancers of the diffusion of the marker, flurbiprofen (Chi et al., 1995:270). Foam formulations were manufactured with the olive- and coconut oil emulgels that had demonstrated the best median flux values of flurbiprofen from the natural oil emulgel formulations. These formulated foams, however, did not significantly increased flux values for flurbiprofen through the skin, but only achieved values of 5.56 μg/cm2.h for the olive oil foam and 4.36 μg/cm2.h for the coconut oil foam formulations. The low flux values could have been attributed to the nature of the formulation itself, which was filled with trapped air that could have resulted in the formulation not making optimal direct contact with the available skin surface. Throughout this study, it became evident that olive oil, predominantly consisting of oleic acid (UFA), was most effective in enhancing the flux of the lipophilic marker, flurbiprofen, through the skin, closely followed by coconut oil consisting of SFAs, with lauric- and myristic acid as its main constituents. Better enhancement effects were observed with those oils containing high amounts of oleic acid (MUFA), than oils consisting of almost equal amounts of both PUFAs and MUFAs (avocado-, emu- and crocodile oil), or oils mainly consisting of PUFAs (grapeseed oil) as its main components, but their effect was not more significant than the oil containing SFAs (coconut oil) as its key components. / Thesis (MSc (Pharmaceutics))--North-West University, Potchefstroom Campus, 2013.

Natural oils are regularly used in cosmetics and as treatment for numeral skin conditions (Nielsen, 2006:575). The natural products industry is a multibillion dollar industry and has grown tremendously over the past few years. Natural oils used in cosmetics contain a range of fatty acids which contribute to several valuable properties in cosmetic- and personal care products. Fatty acids are divided into saturated acids and unsaturated acids (Vermaak et al., 2011:920,922). Because of the popularity and wide diversity of skin care products, it is necessary to create products that will distinguish themselves from the rest of the commercial products. To include natural oils in skin care products is a new way to prevent skin ageing, as well as other dermatological conditions. In this study, a natural oil, namely crocodile oil was used. Crocodile oil is obtained from the fat of the Nile crocodile (Crocodylus niloticus). Crocodile oil has the same composition as human skin oil. It only differs with regard to the percentages of the ingredients present. Crocodile oil contains saturated and unsaturated fatty acids. Because of the similar composition as human skin oil, crocodile oil will rarely be allergenic when applied to human skin and therefore will be a very accepted and harmless product to use (Croc city, 2012). There are many claims of positive results when crocodile oil containing products have been used. It includes fading of freckles, treatment of acne and pimple marks, dark lines, wrinkles and laugh lines. It also includes vanishing of dark shadows, sun spots and other discolorations. It helps prevent discolorations from forming and makes the skin softer, brighter and more attractive. It also controls rashness and dryness (Croc city, 2012). Because of crocodile oil’s anti-ageing, anti-fungal and anti-bacterial effects claimed by crocodile oil suppliers, and due to the fact that little scientific data is available on crocodile oil, it was decided to investigate the claims. In this study, the aims and objectives were to use natural oil, namely crocodile oil, and investigate the fatty acid profile, anti-microbial and anti-fungal activity, anti-oxidant activity, toxicity studies, stability determination of crocodile oil lotion and clinical efficacy testing of the anti-ageing effects. To determine the fatty acid profile of crocodile oil, fatty acid methyl ester (FAME) analysis with gas chromatography were used. Identification of FAME peaks in the samples was made by comparing the relative retention times of FAME peaks from samples to those of reference standards. The composition of fatty acids in crocodile oil compared well to fatty acids found in human skin oil. Anti-microbial and anti-fungal tests were done by Envirocare Laboratories, North-West University, Potchefstroom. Staphylococcus aureus, Esterichia coli, Pseudomanas aeruginosa, Candida albicans, Brasiliensis, Propionibacterium acnes and Trichophyton rubrum cultures were used to determine the anti-microbial and anti-fungal activity of crocodile oil. Unfortunately no activity was observed. The anti-oxidant properties of crocodile oil and crocodile oil lotion were determined by using the most commonly used method for measuring Malondialdehyde (MDA) in biological samples, namely the thiobarbituric acid (TBA) test. This method is based on spectrophotometric quantification of the pink complex formed after reaction of MDA with two molecules of TBA. No anti-oxidant activity was observed in the oil or the lotion. Toxicity studies were performed by Dr. D. Goosen (BVSc Hons. Pret.) from Tswane University of Technology (Pretoria, South Africa). The studies showed that the lotion had no toxicity in the skin sensitisation, acute dermal toxicity and acute dermal irritation studies. To determine the stability of the crocodile oil lotion, the formulated products were store at 25 °C / 60% RH (relative humidity), 30 °C / 60% RH and 40 °C / 75% RH for 6 months in the original packaging as well as a glass container. The stability tests included pH, viscosity, visual appearance assessment, zeta-potential, droplet size and mass loss. The crocodile cream lotion was stable over the 6 months period in both containers. Clinical efficacy testing was performed at the CEL (Clinical Efficacy Laboratory) of the North-West University, Potchefstroom, South Africa. A short-term study over a period of 3 h was performed to investigate the hydrating effects of crocodile oil lotion. A long-term study over a period of 12 weeks was performed to examine the anti-ageing effects of crocodile oil lotion. An erythema study was also conducted to test the anti-erythema properties of crocodile oil lotion. Although the crocodile oil lotion as well as the placebo lotion showed an increase in skin hydration, there was no significant difference between the two treatments. Crocodile oil lotion also showed no anti-erythema properties. / Thesis (PhD (Pharmaceutics))--North-West University, Potchefstroom Campus, 2013.

Natural oils are regularly used in cosmetics and as treatment for numeral skin conditions (Nielsen, 2006:575). The natural products industry is a multibillion dollar industry and has grown tremendously over the past few years. Natural oils used in cosmetics contain a range of fatty acids which contribute to several valuable properties in cosmetic- and personal care products. Fatty acids are divided into saturated acids and unsaturated acids (Vermaak et al., 2011:920,922). Because of the popularity and wide diversity of skin care products, it is necessary to create products that will distinguish themselves from the rest of the commercial products. To include natural oils in skin care products is a new way to prevent skin ageing, as well as other dermatological conditions. In this study, a natural oil, namely crocodile oil was used. Crocodile oil is obtained from the fat of the Nile crocodile (Crocodylus niloticus). Crocodile oil has the same composition as human skin oil. It only differs with regard to the percentages of the ingredients present. Crocodile oil contains saturated and unsaturated fatty acids. Because of the similar composition as human skin oil, crocodile oil will rarely be allergenic when applied to human skin and therefore will be a very accepted and harmless product to use (Croc city, 2012). There are many claims of positive results when crocodile oil containing products have been used. It includes fading of freckles, treatment of acne and pimple marks, dark lines, wrinkles and laugh lines. It also includes vanishing of dark shadows, sun spots and other discolorations. It helps prevent discolorations from forming and makes the skin softer, brighter and more attractive. It also controls rashness and dryness (Croc city, 2012). Because of crocodile oil’s anti-ageing, anti-fungal and anti-bacterial effects claimed by crocodile oil suppliers, and due to the fact that little scientific data is available on crocodile oil, it was decided to investigate the claims. In this study, the aims and objectives were to use natural oil, namely crocodile oil, and investigate the fatty acid profile, anti-microbial and anti-fungal activity, anti-oxidant activity, toxicity studies, stability determination of crocodile oil lotion and clinical efficacy testing of the anti-ageing effects. To determine the fatty acid profile of crocodile oil, fatty acid methyl ester (FAME) analysis with gas chromatography were used. Identification of FAME peaks in the samples was made by comparing the relative retention times of FAME peaks from samples to those of reference standards. The composition of fatty acids in crocodile oil compared well to fatty acids found in human skin oil. Anti-microbial and anti-fungal tests were done by Envirocare Laboratories, North-West University, Potchefstroom. Staphylococcus aureus, Esterichia coli, Pseudomanas aeruginosa, Candida albicans, Brasiliensis, Propionibacterium acnes and Trichophyton rubrum cultures were used to determine the anti-microbial and anti-fungal activity of crocodile oil. Unfortunately no activity was observed. The anti-oxidant properties of crocodile oil and crocodile oil lotion were determined by using the most commonly used method for measuring Malondialdehyde (MDA) in biological samples, namely the thiobarbituric acid (TBA) test. This method is based on spectrophotometric quantification of the pink complex formed after reaction of MDA with two molecules of TBA. No anti-oxidant activity was observed in the oil or the lotion. Toxicity studies were performed by Dr. D. Goosen (BVSc Hons. Pret.) from Tswane University of Technology (Pretoria, South Africa). The studies showed that the lotion had no toxicity in the skin sensitisation, acute dermal toxicity and acute dermal irritation studies. To determine the stability of the crocodile oil lotion, the formulated products were store at 25 °C / 60% RH (relative humidity), 30 °C / 60% RH and 40 °C / 75% RH for 6 months in the original packaging as well as a glass container. The stability tests included pH, viscosity, visual appearance assessment, zeta-potential, droplet size and mass loss. The crocodile cream lotion was stable over the 6 months period in both containers. Clinical efficacy testing was performed at the CEL (Clinical Efficacy Laboratory) of the North-West University, Potchefstroom, South Africa. A short-term study over a period of 3 h was performed to investigate the hydrating effects of crocodile oil lotion. A long-term study over a period of 12 weeks was performed to examine the anti-ageing effects of crocodile oil lotion. An erythema study was also conducted to test the anti-erythema properties of crocodile oil lotion. Although the crocodile oil lotion as well as the placebo lotion showed an increase in skin hydration, there was no significant difference between the two treatments. Crocodile oil lotion also showed no anti-erythema properties. / Thesis (PhD (Pharmaceutics))--North-West University, Potchefstroom Campus, 2013.