La popularité de la grande variété de l'utilisation d'Internet entraîne une croissance significative du trafic de données dans les réseaux de télécommunications. L'efficacité de la transmission de données sera contestée en vertu du principe de la capacité actuelle du réseau et des mécanismes de contrôle de flux de données. En plus d'augmenter l'investissement financier pour étendre la capacité du réseau, améliorer les techniques existantes est plus rationnel et éconmique.Diverses recherches de pointe pour faire face aux besoins en évolution des réseaux ont vu le jour, et l'une d'elles est appelée codage de réseau. Comme une extension naturelle dans la théorie du codage, il permet le mélange de différents flux réseau sur les noeuds intermédiaires, ce qui modifie la façon d'éviter les collisions de flux de données. Il a été appliqué pour obtenir un meilleur débit, fiabilité, sécurité et robustesse dans différents environnements et applications réseau. Cette thèse porte sur l'utilisation du réseau de codage pour le multicast dans les réseaux maillés fixes et systèmes de stockage distribués. Nous avons d'abord des modèles de différentes stratégies de routage multicast dans un cadre d'optimisation, y compris de multicast à base d'arbres et de codage de réseau; nous résolvons les modèles avec des algorithmes efficaces et comparons l'avantage de codage, en termes de gain de débit de taille moyenne graphique généré aléatoirement. Basé sur l'analyse numérique obtenue à partir des expériences précédentes, nous proposons un cadre révisé de routage multicast, appelé codage de réseau stratégique, qui combine transmission muticast standard et fonctions de codage de réseau afin d'obtenir le maximum de bénéfice de codage réseau au moindre coût lorsque ces coûts dépendent à la fois sur le nombre de noeuds à exécuter un codage et le volume de trafic qui est codé. Enfin, nous étudions le problème révisé de transport qui est capable de calculer un système de routage statique entre les serveurs et les clients dans les systèmes de stockage distribués où nous appliquons le codage pour soutenir le stockage de contenu. Nous étendons l'application à un problème d'optimisation général, nommé problème de transport avec des contraintes de degré, qui peut être largement utilisé dans divers domaines industriels, y compris les télécommunications, mais n'a pas été étudié très souvent. Pour ce problème, nous obtenons quelques résultats théoriques préliminaires et nous proposons une approche de décomposition Lagrange raisonnable / The popularity of the great variety of Internet usage brings about a significant growth of the data traffic in telecommunication network. Data transmission efficiency will be challenged under the premise of current network capacity and data flow control mechanisms. In addition to increasing financial investment to expand the network capacity, improving the existing techniques are more rational and economical. Various cutting-edge researches to cope with future network requirement have emerged, and one of them is called network coding. As a natural extension in coding theory, it allows mixing different network flows on the intermediate nodes, which changes the way of avoiding collisions of data flows. It has been applied to achieve better throughput and reliability, security, and robustness in various network environments and applications. This dissertation focuses on the use of network coding for multicast in fixed mesh networks and distributed storage systems. We first model various multicast routing strategies within an optimization framework, including tree-based multicast and network coding; we solve the models with efficient algorithms, and compare the coding advantage, in terms of throughput gain in medium size randomly generated graphs. Based on the numerical analysis obtained from previous experiments, we propose a revised multicast routing framework, called strategic network coding, which combines standard multicast forwarding and network coding features in order to obtain the most benefit from network coding at lowest cost where such costs depend both on the number of nodes performing coding and the volume of traffic that is coded. Finally, we investigate a revised transportation problem which is capable of calculating a static routing scheme between servers and clients in distributed storage systems where we apply coding to support the storage of contents. We extend the application to a general optimization problem, named transportation problem with degree constraints, which can be widely used in different industrial fields, including telecommunication, but has not been studied very often. For this problem, we derive some preliminary theoretical results and propose a reasonable Lagrangian decomposition approach

The proliferation of wireless ad-hoc networks especially wireless LAN (IEEE 802.11b Standard) in the commercial market in recent years has reached a critical mass. The adoption and strong support of wireless IEEE 802.11 standard, coupled with the consequent decline in costs, has made wireless LAN deployment as one of the fastest growth area in communication access technology. With the ever increasing use of wireless LAN technology the various networks are reaching their full capacity in terms of network throughput, number of users and interference level in the wireless channel. In this thesis work I propose to the use smart antenna technology and a power management scheme in the wireless ad-hoc networks to increase the network capacity in terms of throughput, number of simultaneous communication and to lower the average transmit power and consequently co-channel interference. Power management scheme can be used to maximize the power efficiency of the transmitter by choosing an optimum transmit power level. Smart antenna or adaptive antenna array technology has reached a level of sophistication that it is feasible to use it on small mobile terminals like handheld PDA, LAPTOP and other mobile devices with limited battery power. The simulation results of various ad-hoc network scenario shows that there are significant gains to be had if these technologies can be integrated in the existing wireless LAN physical layer and/or in the standard them self. Smart antennas along with slight modification in channel access scheme reduce co-channel interference dramatically and increases the number of simultaneous transmissions hence improves network throughput. Power management algorithm is shown to improve average transmission of a node. We present a mathematical framework to characterize the outage probability of cellular mobile radio system with selective co-channel interference receiver in overloaded array environments. The mathematical framework outlines a general numerical procedure for computing the probability of outage of a cellular mobile radio system that is equipped with a smart antenna to suppress a few strongest co-channel interferers (CCI) out of a total of NI active interferers by null steering. / Master of Science

The popularity of the great variety of Internet usage brings about a significant growth of the data traffic in telecommunication network. Data transmission efficiency will be challenged under the premise of current network capacity and data flow control mechanisms. In addition to increasing financial investment to expand the network capacity, improving the existing techniques are more rational and economical. Various cutting-edge researches to cope with future network requirement have emerged, and one of them is called network coding. As a natural extension in coding theory, it allows mixing different network flows on the intermediate nodes, which changes the way of avoiding collisions of data flows. It has been applied to achieve better throughput and reliability, security, and robustness in various network environments and applications. This dissertation focuses on the use of network coding for multicast in fixed mesh networks and distributed storage systems. We first model various multicast routing strategies within an optimization framework, including tree-based multicast and network coding; we solve the models with efficient algorithms, and compare the coding advantage, in terms of throughput gain in medium size randomly generated graphs. Based on the numerical analysis obtained from previous experiments, we propose a revised multicast routing framework, called strategic network coding, which combines standard multicast forwarding and network coding features in order to obtain the most benefit from network coding at lowest cost where such costs depend both on the number of nodes performing coding and the volume of traffic that is coded. Finally, we investigate a revised transportation problem which is capable of calculating a static routing scheme between servers and clients in distributed storage systems where we apply coding to support the storage of contents. We extend the application to a general optimization problem, named transportation problem with degree constraints, which can be widely used in different industrial fields, including telecommunication, but has not been studied very often. For this problem, we derive some preliminary theoretical results and propose a reasonable Lagrangian decomposition approach

This work is focused on the issue of wireless networks according to the IEEE 802.11 standard. The main subject of research is the Rate Adaptation Algorithms (RAA). The work also contains a description of simulation environments NS-3 and OMNeT in terms of adaptation algorithms. At the end of the work there is a summary of wireless network simulations in NS-3 and OMNeT environments and their comparison with the actual measurement of network parameters.

In this study, the effect of implementing Network Coding on the aggregated throughput in Wireless Mesh Networks, was examined. Wireless Mesh Networks (WMNs) are multiple hop wireless networks, where routing through any node is possible. The implication of this characteristic, is that messages flow across the points where it would have been terminated in conventional wireless networks. User nodes in conventional wireless networks only transmit and receive messages from an Access Point (AP), and discard any messages not intended for them. The result is an increase in the volume of network traffic through the links of WMNs. Additionally, the dense collection of multiple RF signals propagating through a shared wireless medium, contributes to the situation where the links become saturated at levels below their capacity. The need exists to examine methods that will improve the utilisation of the shared wireless medium in WMNs. Network Coding is a coding and decoding technique at the network level of the OSI stack, aimed to improve the boundaries of saturated links. The technique implies that the bandwidth is simultaneously shared amongst separate message flows, by combining these flows at common intermediate nodes. The number of transmissions needed to convey information through the network, is decreased by Network Coding. The result is in an improvement of the aggregated throughput. The research approach followed in this dissertation, includes the development of a model that investigates the aggregated throughput performance of WMNs. The scenario of the model, followed a typical example of indoors WMN implementations. Therefore, the physical environment representation of the network elements, included an indoors log–distance path loss channel model, to account for the different effects such as: power absorption through walls; and shadowing. Network functionality in the model was represented through a network flow programming problem. The problem was concerned with determining the optimal amount of flow represented through the links of the WMN, subject to constraints pertaining to the link capacities and mass balance at each node. The functional requirements of the model stated that multiple concurrent sessions were to be represented. This condition implied that the network flow problem had to be a multi–commodity network flow problem. Additionally, the model requirements stated that each session of flow should remain on a single path. This condition implied that the network flow problem had to be an integer programming problem. Therefore, the network flow programming problem of the model was considered mathematically equivalent to a multi–commodity integer programming problem. The complexity of multi–commodity integer programming problems is NP–hard. A heuristic solving method, Simulated Annealing, was implemented to solve the goal function represented by the network flow programming problem of the model. The findings from this research provide evidence that the implementation of Network Coding in WMNs, nearly doubles the level of the calculated aggregated throughput values. The magnitude of this throughput increase, can be further improved by additional manipulation of the network traffic dispersion. This is achieved by utilising link–state methods, rather than distance vector methods, to establish paths for the sessions of flow, present in the WMNs. / Thesis (M.Ing. (Computer and Electronical Engineering))--North-West University, Potchefstroom Campus, 2012.

In this study, the effect of implementing Network Coding on the aggregated throughput in Wireless Mesh Networks, was examined. Wireless Mesh Networks (WMNs) are multiple hop wireless networks, where routing through any node is possible. The implication of this characteristic, is that messages flow across the points where it would have been terminated in conventional wireless networks. User nodes in conventional wireless networks only transmit and receive messages from an Access Point (AP), and discard any messages not intended for them. The result is an increase in the volume of network traffic through the links of WMNs. Additionally, the dense collection of multiple RF signals propagating through a shared wireless medium, contributes to the situation where the links become saturated at levels below their capacity. The need exists to examine methods that will improve the utilisation of the shared wireless medium in WMNs. Network Coding is a coding and decoding technique at the network level of the OSI stack, aimed to improve the boundaries of saturated links. The technique implies that the bandwidth is simultaneously shared amongst separate message flows, by combining these flows at common intermediate nodes. The number of transmissions needed to convey information through the network, is decreased by Network Coding. The result is in an improvement of the aggregated throughput. The research approach followed in this dissertation, includes the development of a model that investigates the aggregated throughput performance of WMNs. The scenario of the model, followed a typical example of indoors WMN implementations. Therefore, the physical environment representation of the network elements, included an indoors log–distance path loss channel model, to account for the different effects such as: power absorption through walls; and shadowing. Network functionality in the model was represented through a network flow programming problem. The problem was concerned with determining the optimal amount of flow represented through the links of the WMN, subject to constraints pertaining to the link capacities and mass balance at each node. The functional requirements of the model stated that multiple concurrent sessions were to be represented. This condition implied that the network flow problem had to be a multi–commodity network flow problem. Additionally, the model requirements stated that each session of flow should remain on a single path. This condition implied that the network flow problem had to be an integer programming problem. Therefore, the network flow programming problem of the model was considered mathematically equivalent to a multi–commodity integer programming problem. The complexity of multi–commodity integer programming problems is NP–hard. A heuristic solving method, Simulated Annealing, was implemented to solve the goal function represented by the network flow programming problem of the model. The findings from this research provide evidence that the implementation of Network Coding in WMNs, nearly doubles the level of the calculated aggregated throughput values. The magnitude of this throughput increase, can be further improved by additional manipulation of the network traffic dispersion. This is achieved by utilising link–state methods, rather than distance vector methods, to establish paths for the sessions of flow, present in the WMNs. / Thesis (M.Ing. (Computer and Electronical Engineering))--North-West University, Potchefstroom Campus, 2012.