As semiconductor technologies develop, a System-on-Chip (SoC) that integrates all semiconductor intellectual property (IP) cores is suggested and widely used for various applications. A traditional bus interconnection does not support transmitting data between IP cores for high performance. Because of this reason, a Network-on-Chip (NoC) has been suggested to provide an efficient and scalable solution to interconnect among all IP cores. High throughput and low latency have recently become the main important factors of NoC for achieving hard guaranteed real-time systems. In order to guarantee these factors and provide real-time service (i.e., Guaranteed Service, GS), the circuit switching (CS) approach has been widely utilized. The CS approach allocates mutually exclusive paths to transmitting data between different sources and destinations using dedicated NoC resources. However, the exclusive occupancy of the allocated path reduces the efficiency of the overall use of NoC resources. In order to solve this problem, Space-Division-Multiplexing (SDM) and Time-Division-Multiplexing (TDM) techniques have been suggested. SDM implements a circuit switching technique by assigning physically different NoC-links between different connections. Path connections of the SDM technique based on spatial resources assignment do not provide high scalability. In contrast to this, using virtual time slots for a path connection, the TDM technique can share physical links between exclusively established connections, thereby improving NoC path diversity. For all of these mentioned techniques, the factor that significantly impacts the system efficiency or performance scaling is how the path is allocated. In recent years, a dynamic connection allocation approach that can cope with highly dynamic workloads has been gaining attention due to the sudden and diverse demands of applications in real-time systems. There are two groups in the dynamic connection allocation approach. One is a distributed allocation technique, and the other is a centralized allocation technique. While distributed allocation exploits additional logic integrated into the NoC-routers for path search and allocation, the centralized approach makes use of a central unit to manage the path allocation problem. There are several algorithms for the centralized allocation technique. Trellis search-based allocation approach shows the best performance among them. Many algorithms related to centralized connection allocators have been studied extensively during the past decade. However, relatively little attention was paid to methodology in analyzing and evaluating the centralized connection allocation algorithms. In order to further develop the algorithms, it is necessary to understand and evaluate the centralized connection allocator by establishing a new analysis methodology. Thus, this thesis presents a performance analysis methodology for the trellis search-based allocation approach. Firstly, this thesis proposes a system model for analysis. Secondly, performance metrics are defined. Finally, the analysis results of each performance metric related to the trellis search-based allocation approach are presented. Through this analysis, the performance of the trellis search-based allocation approach can be accurately analyzed. Although a simulation is not performed, the upper limit of performance of the trellis search-based allocation approach can also be predicted through the analysis metrics. Additionally, we introduce the general formulation of the trellis search-based path allocation algorithm. The weight values among available paths through the branch metric and path metric are proposed to enable higher performance path connection. Furthermore, according to network size, topology, TDM, interface load delivery, and router internal storage, the performance of trellis search-based path allocation algorithms is also described. In the end, the Application Specific Instruction Processor (ASIP) hardware platform customized for the trellis search-based path allocation algorithm is presented. The shortest available and lowest-cost (SALC) path search algorithm is proposed to improve the success rate of path connection in the ASIP hardware platform. We evaluate the algorithm performance and implementation synthesis results. In order to realize the dynamic connection approach, a short execution cycle of ASIP time is essential. We develop several algorithms to achieve this short execution cycle. The first one is a rectangular region of search algorithm that allows adapting the size and form of path search region according to the particular source-destination positions and considers actual operational constraints. The average execution cycles for searching an optimum path are decreased because the unnecessary region for path-search is excluded. The second one is a path-spreading search algorithm that separates between involved routers and uninvolved routers in path search. The involved routers are selected and spread out from source to destination at each intermediate trellis-search process. The path-search overhead is considerably reduced due to the router involvements. The third one is a three-directional path-spreading search algorithm that eliminates one direction movement among four spreading movements. Because of this reason, the trellis search-based path connection algorithm, which omits the back-tracing process, can be implemented in the ASIP platform. Thus, the whole algorithm execution time can be halved. The last one is a moving regional path search algorithm that significantly reduces computation complexity by selecting a constant dimensional path-search region that affects performance and moving the region from source to destination. The moving regional path search algorithm achieves a considerable decrement of computational complexity.:1 Introduction 1 1.1 NoC-interconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Thesis outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 Connection allocation in a Network-on-Chip 7 2.1 Circuit Switching NoCs . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.1.1 Guaranteed Service in NoCs . . . . . . . . . . . . . . . . . . . 7 2.1.2 Spatial-Division-Multiplexing technique . . . . . . . . . . . . 8 2.1.3 Time-Division-Multiplexing technique . . . . . . . . . . . . . 10 2.2 System architectures employing circuit switching NoCs . . . . . . . . 11 2.2.1 Static and dynamic connection allocation . . . . . . . . . . . 12 2.2.2 Distributed connection allocation technique . . . . . . . . . . 14 2.2.3 Centralized connection allocation technique . . . . . . . . . . 16 2.2.4 Algorithms for centralized connection allocation . . . . . . . . 17 2.2.4.1 Software based run-time path allocation approach . 18 2.2.4.2 Trellis search-based allocation approach . . . . . . . 19 3 Performance analysis methodology for a centralized connection allocator 23 3.1 System model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3.2 Performance metrics and analysis methodology . . . . . . . . . . . . 25 3.3 System simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4 Trellis search-based path allocation algorithm 45 4.1 General formulation . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 4.1.1 Trellis graph structure . . . . . . . . . . . . . . . . . . . . . . 45 4.1.2 Survivor path selection criterion . . . . . . . . . . . . . . . . . 52 ix 4.1.2.1 Branch metric and path metric . . . . . . . . . . . . 52 4.1.2.2 The shortest-available and lowest-cost path selection criterion . . . . . . . . . . . . . . . . . . . . . . . . . 53 4.2 Algorithm Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 4.2.1 Network topology . . . . . . . . . . . . . . . . . . . . . . . . 55 4.2.2 Network size . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 4.2.3 Time-Division-Multiplexing . . . . . . . . . . . . . . . . . . . 61 4.2.4 NoC interface load diversity . . . . . . . . . . . . . . . . . . . 63 4.2.5 The internal storage of the router . . . . . . . . . . . . . . . . 66 5 ASIP approach for Trellis search-based connection allocation 73 5.1 System model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 5.1.1 Trellis search-based ASIP platform architecture . . . . . . . . 74 5.2 Algorithm for improving success rates of path connection . . . . . . . 81 5.2.1 SALC algorithm for Trellis search-based ASIP platform . . . . 81 5.2.2 Performance evaluation of the SALC algorithm . . . . . . . . 88 5.2.2.1 Simulation results . . . . . . . . . . . . . . . . . . . 88 5.2.2.2 Synthesis results . . . . . . . . . . . . . . . . . . . . 91 5.3 Algorithm for reducing path-search time . . . . . . . . . . . . . . . . 93 5.3.1 Rectangular regional path search algorithm . . . . . . . . . . 93 5.3.2 Path-spreading search algorithm . . . . . . . . . . . . . . . . 99 5.3.3 Three directional path-spreading search algorithm . . . . . . 108 5.3.4 Moving regional path search algorithm . . . . . . . . . . . . . 114 5.3.5 Performance evaluation . . . . . . . . . . . . . . . . . . . . . 123 5.3.5.1 Simulation results . . . . . . . . . . . . . . . . . . . 123 5.3.5.2 Synthesis results . . . . . . . . . . . . . . . . . . . . 126 6 Conclusion and Future work 131 6.1 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 6.2 Future work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Bibliography 135