This thesis addresses the problem of size invariant shape recognition based on scale transformation within modulated competition neural layer. In this thesis I will present the advantages of applying neural networks in pattern recognition and study how the traditional automatic target recognition fails to recognise known patterns due to size change, cluttered backgrounds and distortion. Within the thesis we will also discuss possible ways to overcome size variance and how the combining of Selective Attention Adaptive Resonance Theory makes the system capable of recognising images with size changes, distortion and in complex backgrounds. The model is constructed based on neurophysiology experiments in vision systems. The Neural Circuit Simulation studies undertaken demonstrate the effectiveness of the proposed model in recognising 2D objects in many non-ideal visual conditions. Despite size differences from the stored memory image, difficult visual environments, including severe distortion, the simulation results indicate the model can recognise the shape stored in memory from the simulated shapes. / From the research presented in this thesis, it is concluded that the use of attentional mechanisms can enhance artificial vision systems to cope with difficult visual conditions. It is shown that feed-forward-feedback interactions with synaptic modulation are a versatile and powerful mechanism for performing many useful functions such as gain control, filtering and selective processing in neural network based vision systems. / Thesis (MEng(ComputerSystemsEng))--University of South Australia, 2004.

No description available.

No description available.

This thesis investigates the viability of using dynamic-based ‘damage fingerprints’ in combination with artificial neural network (ANN) techniques and principal component analysis (PCA) to identify defects in civil engineering structures. Vibration-based damage detection techniques are global methods and are based on the principle that damage alters both the physical properties, such as mass, stiffness and damping, as well as the dynamic properties of a structure. It is therefore feasible to utilise measured dynamic quantities, such as time histories, frequency response functions (FRFs) and modal parameters, from structural vibration to detect damage. Damage identification based on vibrational characteristics is essentially a form of pattern recognition problem, which looks for the discrimination between two or more signal categories, e.g., before and after a structure is damaged, or differences in damage levels or locations. Artificial neural networks are capable of pattern recognition, classification, signal processing and system identification, and are therefore an ideal tool in complementing dynamic-based damage detection techniques. Likewise, PCA has pattern recognition abilities and is capable of data reduction and noise filtering. With these characteristics, both techniques can help overcome limitations associated with previously developed vibration-based methods and assist in delivering more accurate and robust damage identification results. In this study, two types of dynamic-based damage identification methods are proposed. The first is based on the damage index (DI) method (initially proposed by Stubbs et al.), while the second approach uses changes in FRF data as damage fingerprints. The advantage of using damage patterns from the DI method, which is based on changes in modal strain energies, is that only measured mode shapes are required in the damage identification, without having to know the complete stiffness and mass matrices of the structure. The use of directly measured FRF data, which provide an abundance of information, is further beneficial as the execution of experimental modal analysis is not required, thus greatly reducing human induced errors. Both proposed methods utilise PCA and neural network techniques for damage feature extraction, data reduction and noise filtering. A hierarchical network training scheme based on network ensembles is proposed to take advantage of individual characteristics of damage patterns obtained from different sources (different vibrational modes for the DI-based method and different sensor locations for the FRF-based method). In the ensemble, a number of individual networks are trained in parallel, which optimises the network training and delivers improved damage identification outcomes. Both methods are first tested on a simple beam structure to assess their feasibility and performance. Then, the FRF-based method is applied to a more complicated structure, a two-storey framed structure, for validation purposes. The two methods are verified by numerical simulations and laboratory testing for both structures. As defects, notch type damage of different severities and locations are investigated for the beam structure. For the two-storey framed structure, three different types of structural change are studied, i.e. boundary damage, added mass changes and section reduction damage. To simulate field-testing conditions, the issue of limited sensor availability is incorporated into the analysis. For the DI-based method, sensor network limitations are compensated for by refining coarse mode shape vectors using cubic spline interpolation techniques. To simulate noise disturbances experienced during experimental testing, for the numerical simulations, measurement data are polluted with different levels of white Gaussian noise. The damage identifications of both methods are found to be accurate and reliable for all types of damage. For the DI-based method, the results show that the proposed method is capable of overcoming limitations of the original DI method associated with node point singularities and sensitivities to limited number of sensors. For the FRF-based method, excellent results are obtained for damage identification of the beam structure as well as of the two-storey framed structure. A major contribution is the training of the neural networks in a network ensemble scheme, which operates as a filtering mechanism against individual networks with poor performance. The ensemble network, which fuses results of individual networks, gives results that are in general better than the outcomes of any of the individual networks. Further, the noise filtering capabilities of PCA and neural networks demonstrate great performance in the proposed methods, especially for the FRF-based identification scheme.

This thesis investigates the viability of using dynamic-based ‘damage fingerprints’ in combination with artificial neural network (ANN) techniques and principal component analysis (PCA) to identify defects in civil engineering structures. Vibration-based damage detection techniques are global methods and are based on the principle that damage alters both the physical properties, such as mass, stiffness and damping, as well as the dynamic properties of a structure. It is therefore feasible to utilise measured dynamic quantities, such as time histories, frequency response functions (FRFs) and modal parameters, from structural vibration to detect damage. Damage identification based on vibrational characteristics is essentially a form of pattern recognition problem, which looks for the discrimination between two or more signal categories, e.g., before and after a structure is damaged, or differences in damage levels or locations. Artificial neural networks are capable of pattern recognition, classification, signal processing and system identification, and are therefore an ideal tool in complementing dynamic-based damage detection techniques. Likewise, PCA has pattern recognition abilities and is capable of data reduction and noise filtering. With these characteristics, both techniques can help overcome limitations associated with previously developed vibration-based methods and assist in delivering more accurate and robust damage identification results. In this study, two types of dynamic-based damage identification methods are proposed. The first is based on the damage index (DI) method (initially proposed by Stubbs et al.), while the second approach uses changes in FRF data as damage fingerprints. The advantage of using damage patterns from the DI method, which is based on changes in modal strain energies, is that only measured mode shapes are required in the damage identification, without having to know the complete stiffness and mass matrices of the structure. The use of directly measured FRF data, which provide an abundance of information, is further beneficial as the execution of experimental modal analysis is not required, thus greatly reducing human induced errors. Both proposed methods utilise PCA and neural network techniques for damage feature extraction, data reduction and noise filtering. A hierarchical network training scheme based on network ensembles is proposed to take advantage of individual characteristics of damage patterns obtained from different sources (different vibrational modes for the DI-based method and different sensor locations for the FRF-based method). In the ensemble, a number of individual networks are trained in parallel, which optimises the network training and delivers improved damage identification outcomes. Both methods are first tested on a simple beam structure to assess their feasibility and performance. Then, the FRF-based method is applied to a more complicated structure, a two-storey framed structure, for validation purposes. The two methods are verified by numerical simulations and laboratory testing for both structures. As defects, notch type damage of different severities and locations are investigated for the beam structure. For the two-storey framed structure, three different types of structural change are studied, i.e. boundary damage, added mass changes and section reduction damage. To simulate field-testing conditions, the issue of limited sensor availability is incorporated into the analysis. For the DI-based method, sensor network limitations are compensated for by refining coarse mode shape vectors using cubic spline interpolation techniques. To simulate noise disturbances experienced during experimental testing, for the numerical simulations, measurement data are polluted with different levels of white Gaussian noise. The damage identifications of both methods are found to be accurate and reliable for all types of damage. For the DI-based method, the results show that the proposed method is capable of overcoming limitations of the original DI method associated with node point singularities and sensitivities to limited number of sensors. For the FRF-based method, excellent results are obtained for damage identification of the beam structure as well as of the two-storey framed structure. A major contribution is the training of the neural networks in a network ensemble scheme, which operates as a filtering mechanism against individual networks with poor performance. The ensemble network, which fuses results of individual networks, gives results that are in general better than the outcomes of any of the individual networks. Further, the noise filtering capabilities of PCA and neural networks demonstrate great performance in the proposed methods, especially for the FRF-based identification scheme.

Thesis (Ph. D.)--University of North Texas, Aug., 2007. / Title from title page display. Includes bibliographical references.

Thesis (Ph.D.) -- McMaster University, 1998. / Includes bibliographical references (leaves 129-144). Also available via World Wide Web.

Thesis (M.S.)--Rochester Institute of Technology, 2007. / Typescript. Includes bibliographical references (p. 49-52).

Thesis (Ph. D.)--University of Texas at Austin, 2006. / Vita. Includes bibliographical references.

Thesis (Ph.D) -- McMaster University, 1997. / Includes bibliographical references (leaves 113-124). Also available via World Wide Web.