1 |
Interdiffusion Analysis For Nicocraly And Nial Vs. Various SuperalloysPerez, Emmanuel 01 January 2005 (has links)
Hot section components in gas turbines can be NiCoCrAlY-coated to provide the component with an Al reservoir that maintains a protective oxide layer on its surface. Over the service life of the component, the coatings degrade by composition and phase changes due to oxidation/hot-corrosion, and multicomponent interdiffusion from and into the superalloy substrate. In this study, the rate of Al interdiffusion into selected Ni-base superalloys using various diffusion couples of two-phase NiCoCrAlY (beta + gamma) and single beta-phase NiAl with the selected alloys is measured. The diffusion couples were examined with an emphasis on the composition-dependence of Al interdiffusion. Microstructural analysis of the NiCoCrAlY vs. superalloys couples is performed to examine the dependence of coatings lifetime on the superalloy composition. The beta-NiAl diffusion couples were analyzed to determine the integrated, apparent and average effective interdiffusion coefficient as a function of superalloy's composition. Concentration profiles were obtained by EPMA of the NiAl vs. superalloy diffusion couples. Findings of this study show that the lifetimes of NiCoCrAlY are heavily dependent on superalloy compositions. The rate of interdiffusion in the diffusion couples is affected by the refractory precipitate phase microstructure structures in the interdiffusion zones as well as by component interactions. The results of the beta-NiAl diffusion couples show that increasing concentrations of Cr, Mo and Ti in the superalloy increase the Al effective interdiffusion coefficient into the superalloy, while increasing concentrations of Al, Ta and W reduce it. Thus NiCoCrAlY-superalloy systems may be designed to produce optimal microstructures in the interdiffusion zone and minimize Al interdiffusion by consideration of these diffusional interactions.
|
2 |
Mechanical Behaviour of Gas Turbine CoatingsEskner, Mats January 2004 (has links)
Coatings are frequently applied on gas turbine components inorder to restrict surface degradation such as corrosion andoxidation of the structural material or to thermally insulatethe structural material against the hot environment, therebyincreasing the efficiency of the turbine. However, in order toobtain accurate lifetime expectancies and performance of thecoatings system it is necessary to have a reliableunderstanding of the mechanical properties and failuremechanisms of the coatings. In this thesis, mechanical and fracture behaviour have beenstudied for a NiAl coating applied by a pack cementationprocess, an air-plasma sprayed NiCoCrAlY bondcoat, a vacuumplasma-sprayed NiCrAlY bondcoat and an air plasma-sprayed ZrO2+ 6-8 % Y2O3topcoat. The mechanical tests were carried out ata temperature interval between room temperature and 860oC.Small punch tests and spherical indentation were the testmethods applied for this purpose, in which existing bending andindentation theory were adopted for interpretation of the testresults. Efforts were made to validate the test methods toensure their relevance for coating property measurements. Itwas found that the combination of these two methods givescapability to predict the temperature dependence of severalrelevant mechanical properties of gas turbine coatings, forexample the hardness, elastic modulus, yield strength, fracturestrength, flow stress-strain behaviour and ductility.Furthermore, the plasma-sprayed coatings were tested in bothas-coated and heat-treated condition, which revealedsignificant difference in properties. Microstructuralexamination of the bondcoats showed that oxidation with loss ofaluminium plays an important role in the coating degradationand for the property changes in the coatings. Keywords:small punch test, miniaturised disc bendingtests, spherical indentation, coatings, NiAl, APS-NiCoCrAlY,VPS-NiCrAlY, mechanical properties
|
3 |
Mechanical Behaviour of Gas Turbine CoatingsEskner, Mats January 2004 (has links)
<p>Coatings are frequently applied on gas turbine components inorder to restrict surface degradation such as corrosion andoxidation of the structural material or to thermally insulatethe structural material against the hot environment, therebyincreasing the efficiency of the turbine. However, in order toobtain accurate lifetime expectancies and performance of thecoatings system it is necessary to have a reliableunderstanding of the mechanical properties and failuremechanisms of the coatings.</p><p>In this thesis, mechanical and fracture behaviour have beenstudied for a NiAl coating applied by a pack cementationprocess, an air-plasma sprayed NiCoCrAlY bondcoat, a vacuumplasma-sprayed NiCrAlY bondcoat and an air plasma-sprayed ZrO<sub>2</sub>+ 6-8 % Y<sub>2</sub>O<sub>3</sub>topcoat. The mechanical tests were carried out ata temperature interval between room temperature and 860oC.Small punch tests and spherical indentation were the testmethods applied for this purpose, in which existing bending andindentation theory were adopted for interpretation of the testresults. Efforts were made to validate the test methods toensure their relevance for coating property measurements. Itwas found that the combination of these two methods givescapability to predict the temperature dependence of severalrelevant mechanical properties of gas turbine coatings, forexample the hardness, elastic modulus, yield strength, fracturestrength, flow stress-strain behaviour and ductility.Furthermore, the plasma-sprayed coatings were tested in bothas-coated and heat-treated condition, which revealedsignificant difference in properties. Microstructuralexamination of the bondcoats showed that oxidation with loss ofaluminium plays an important role in the coating degradationand for the property changes in the coatings.</p><p><b>Keywords:</b>small punch test, miniaturised disc bendingtests, spherical indentation, coatings, NiAl, APS-NiCoCrAlY,VPS-NiCrAlY, mechanical properties</p>
|
Page generated in 0.0311 seconds