This dissertation addresses the issue of noise in quantum information processing devices. It is common knowledge that quantum states are particularly fragile to the effects of noise. In order to perform scalable quantum computation, it is necessary to suppress effective noise to levels which depend on the size of the computation. Various theoretical proposals have discussed how this can be achieved, under various assumptions about properties of the noise and the availability of qubits. We discuss new approaches to the suppression of noise, and propose experimental protocols characterizing the noise. In the first part of the dissertation, we discuss a number of applications of teleportation to fault-tolerant quantum computation. We demonstrate how measurement-based quantum computation can be made inherently fault-tolerant by exploiting its relationship to teleportation. We also demonstrate how continuous variable quantum systems can be used as ancillas for computation with qubits, and how information can be reliably teleported between these different systems. Building on these ideas, we discuss how the necessary resource states for teleportation can be prepared by allowing quantum particles to be scattered by qubits, and investigate the feasibility of an implementation using superconducting circuits. In the second part of the dissertation, we propose scalable experimental protocols for extracting information about the noise. We concentrate on information which has direct practical relevance to methods of noise suppression. In particular, we demonstrate how standard assumptions about properties of the noise can be tested in a scalable manner. The experimental protocols we propose rely on symmetrizing the noise by random application of unitary operations. Depending on the symmetry group use, different information about the noise can be extracted. We demonstrate, in particular, how to estimate the probability of a small number of qubits being corrupted, as well as how to test for a necessary condition for noise correlations. We conclude by demonstrating how, without relying on assumptions about the noise, the information obtained by symmetrization can also be used to construct protective encodings for quantum states.

This dissertation addresses the issue of noise in quantum information processing devices. It is common knowledge that quantum states are particularly fragile to the effects of noise. In order to perform scalable quantum computation, it is necessary to suppress effective noise to levels which depend on the size of the computation. Various theoretical proposals have discussed how this can be achieved, under various assumptions about properties of the noise and the availability of qubits. We discuss new approaches to the suppression of noise, and propose experimental protocols characterizing the noise. In the first part of the dissertation, we discuss a number of applications of teleportation to fault-tolerant quantum computation. We demonstrate how measurement-based quantum computation can be made inherently fault-tolerant by exploiting its relationship to teleportation. We also demonstrate how continuous variable quantum systems can be used as ancillas for computation with qubits, and how information can be reliably teleported between these different systems. Building on these ideas, we discuss how the necessary resource states for teleportation can be prepared by allowing quantum particles to be scattered by qubits, and investigate the feasibility of an implementation using superconducting circuits. In the second part of the dissertation, we propose scalable experimental protocols for extracting information about the noise. We concentrate on information which has direct practical relevance to methods of noise suppression. In particular, we demonstrate how standard assumptions about properties of the noise can be tested in a scalable manner. The experimental protocols we propose rely on symmetrizing the noise by random application of unitary operations. Depending on the symmetry group use, different information about the noise can be extracted. We demonstrate, in particular, how to estimate the probability of a small number of qubits being corrupted, as well as how to test for a necessary condition for noise correlations. We conclude by demonstrating how, without relying on assumptions about the noise, the information obtained by symmetrization can also be used to construct protective encodings for quantum states.

Today's Advance Technology Facilities require low noise levels and increased noise monitoring. Ambient noise can interfere with the accuracy and precision of experiments and manufacturing processes. Therefore preconstruction site surveys are needed to develop strategies for mitigating noise. Vibration and low frequency electromagnetic fields are particularly detrimental for sensitive instruments, and they are also difficult to mitigate. However a large part of these costs can be avoided or minimized if a quiet building site is selected in the first place. Accelerometers and gauss meters combined with a computer for acquisition and analysis provide a low cost method of evaluating noise levels at proposed building sites. This work examines low frequency vibration and electromagnetic fields at two proposed sites for the planned Physical Science Building at the University of Central Florida.

No description available.

Quantum information processing has been the subject of countless discoveries since the early 1990's. It is believed to be the way of the future for computation: using quantum systems permits one to perform computation exponentially faster than on a regular classical computer. Unfortunately, quantum systems that not isolated do not behave well. They tend to lose their quantum nature due to the presence of the environment. If key information is known about the noise present in the system, methods such as quantum error correction have been developed in order to reduce the errors introduced by the environment during a given quantum computation. In order to harness the quantum world and implement the theoretical ideas of quantum information processing and quantum error correction, it is imperative to understand and quantify the noise present in the quantum processor and benchmark the quality of the control over the qubits. Usual techniques to estimate the noise or the control are based on quantum process tomography (QPT), which, unfortunately, demands an exponential amount of resources. This thesis presents work towards the characterization of noisy processes in an efficient manner. The protocols are developed from a purely abstract setting with no system-dependent variables. To circumvent the exponential nature of quantum process tomography, three different efficient protocols are proposed and experimentally verified. The first protocol uses the idea of quantum error correction to extract relevant parameters about a given noise model, namely the correlation between the dephasing of two qubits. Following that is a protocol using randomization and symmetrization to extract the probability that a given number of qubits are simultaneously corrupted in a quantum memory, regardless of the specifics of the error and which qubits are affected. Finally, a last protocol, still using randomization ideas, is developed to estimate the average fidelity per computational gates for single and multi qubit systems. Even though liquid state NMR is argued to be unsuitable for scalable quantum information processing, it remains the best test-bed system to experimentally implement, verify and develop protocols aimed at increasing the control over general quantum information processors. For this reason, all the protocols described in this thesis have been implemented in liquid state NMR, which then led to further development of control and analysis techniques.

Quantum information processing has been the subject of countless discoveries since the early 1990's. It is believed to be the way of the future for computation: using quantum systems permits one to perform computation exponentially faster than on a regular classical computer. Unfortunately, quantum systems that not isolated do not behave well. They tend to lose their quantum nature due to the presence of the environment. If key information is known about the noise present in the system, methods such as quantum error correction have been developed in order to reduce the errors introduced by the environment during a given quantum computation. In order to harness the quantum world and implement the theoretical ideas of quantum information processing and quantum error correction, it is imperative to understand and quantify the noise present in the quantum processor and benchmark the quality of the control over the qubits. Usual techniques to estimate the noise or the control are based on quantum process tomography (QPT), which, unfortunately, demands an exponential amount of resources. This thesis presents work towards the characterization of noisy processes in an efficient manner. The protocols are developed from a purely abstract setting with no system-dependent variables. To circumvent the exponential nature of quantum process tomography, three different efficient protocols are proposed and experimentally verified. The first protocol uses the idea of quantum error correction to extract relevant parameters about a given noise model, namely the correlation between the dephasing of two qubits. Following that is a protocol using randomization and symmetrization to extract the probability that a given number of qubits are simultaneously corrupted in a quantum memory, regardless of the specifics of the error and which qubits are affected. Finally, a last protocol, still using randomization ideas, is developed to estimate the average fidelity per computational gates for single and multi qubit systems. Even though liquid state NMR is argued to be unsuitable for scalable quantum information processing, it remains the best test-bed system to experimentally implement, verify and develop protocols aimed at increasing the control over general quantum information processors. For this reason, all the protocols described in this thesis have been implemented in liquid state NMR, which then led to further development of control and analysis techniques.

Since the 1950s the jet aeroacoustics community has been involved in predicting and measuring the noise distribution in jets. In this work, cylindrical and planar Fourier near-field acoustical holography are used to investigate radiation from a full-scale, installed jet engine. Practical problems involving measurement aperture and the highly directional nature of the source are addressed. Insights from numerical simulations reveal usable reconstruction regions. A comparison of cylindrical and planar NAH for the respective measurement apertures shows cylindrical NAH outperforms planar NAH on reconstructions both towards and away from the source.