Spelling suggestions: "subject:"noise suppressor"" "subject:"boise suppressor""
1 |
The modeling and use of syntactic foams for passive control of fluid-borne noiseMarek, Kenneth A. 12 January 2015 (has links)
Syntactic foams-composite materials consisting of hollow particles embedded in a host matrix-have many applications for manufactured products, including weight reduction, thermal insulation, and noise reduction. In this thesis, a certain variety of syntactic foam is investigated with regards to reducing fluid borne noise in hydraulic systems. Such a foam maintains stiffness at low hydrostatic pressures and becomes compressible as pressure increases. With this compressibility, the foam is potentially useful as a liner for a reactive noise control device, much like compressed gas style devices currently in use; but the syntactic foam additionally adds significant damping to the system. In order to predict device performance, a linear multimodal model is developed of a hydraulic suppressor, constructed as an expansion chamber lined with a syntactic foam insert. Material models are developed for various compositions of the foam liners, based on an inverse analysis matching the model to experimental results. Two model simplifications are considered, and it is found that a simplified bulk modulus model gives sufficiently accurate results to make approximate predictions of suppressor performance. Several optimizations are performed to predict the optimal material composition for hydraulic excavator work cycles. To help compare the prototype suppressor against commercially available bladder style suppressors, a model is developed for the bladder style silencer and is validated experimentally. Overall, this work both demonstrates the current and potential utility of syntactic foam as a device lining material, and contributes new models to the hydraulics noise control community.
|
2 |
A new methodology for sizing and performance predictions of a rotary wing ejectorMoodie, Alex Montfort 07 October 2008 (has links)
The application of an ejector nozzle integrated with a reaction drive rotor configuration for a vertical takeoff and landing rotorcraft is considered in this research. The ejector nozzle is a device that imparts energy from a high speed airflow source to a lower speed secondary airflow inside a duct. The overall nozzle exhaust mass flow rate is increased through fluid entrainment, while the exhaust gas velocity is simultaneously decreased. The exhaust gas velocity is strongly correlated to the jet noise produced by the nozzle, making the ejector a good candidate for propulsion system noise reduction. Ejector nozzles are mechanically simple in that there are no moving parts. However, coupled fluid dynamic processes are involved, complicating analysis and design.
Geometric definitions of the ejector nozzle are determined through a reduced fidelity, multi-disciplinary, representation of the rotary wing ejector. The resulting rotary wing ejector geometric sizing procedure relates standard vehicle and rotor design parameters to the ejector. Additionally, a rotary wing ejector performance procedure is developed to compare this rotor configuration to a conventional rotor. Performance characteristics and aerodynamic effects of the rotor and ejector nozzle are analytically studied. Ejector nozzle performance, in terms of exit velocities, is compared to the primary reaction drive nozzle; giving an indication of the potential for noise reduction.
Computational fluid dynamics are paramount in predicting the aerodynamic effects of the ejector nozzle located at the rotor blade tip. Two-dimensional, steady-state, Reynolds-averaged Navier-Stokes (RANS) models are implemented for sectional lift and drag predictions required for the rotor aerodynamic model associated with both the rotary wing ejector sizing and performance procedures. A three-dimensional, unsteady, RANS simulation of the rotary wing ejector is performed to study the aerodynamic interactions between the ejector nozzle and rotor. Overall performance comparisons are made between the two- and three-dimensional models of the rotary wing ejector, and a similar conventional rotor.
|
Page generated in 0.0386 seconds