The focus of this thesis is peak-to-average power ratio (PAPR) reduction in cooperative wireless networks which exploit orthogonal frequency division multiplexing in transmission. To reduce the PAPR clipping is employed at the source node. The first contribution focuses upon an amplify-and-forward (AF) type network with four relay nodes which exploits distributed closed loop extended orthogonal space frequency block coding to improve end-to-end performance. Oversampling and filtering are used at the source node to reduce out-of-band interference and the iterative amplitude reconstruction decoding technique is used at the destination node to mitigate in-band distortion which is introduced by the clipping process. In addition, by exploiting quantized group feedback and phase rotation at two of the relay nodes, the system achieves full cooperative diversity in addition to array gain. The second contribution area is outage probability analysis in the context of multi-relay selection in a cooperative AF network with frequency selective fading channels. The gains of time domain multi-path fading channels with L paths are modeled with an Erlang distribution. General closed form expressions for the lower and upper bounds of outage probability are derived for arbitrary channel length L as a function of end-to-end signal to noise ratio. This analysis is then extended for the case when single relay selection from an arbitrary number of relay nodes M is performed. The spatial and temporal cooperative diversity gain is then analysed. In addition, exact form of outage probability for multi-path channel length L = 2 and selecting the best single relay from an arbitrary number of relay nodes M is obtained. Moreover, selecting a pair of relays when L = 2 or 3 is additionally analysed. Finally, the third contribution context is outage probability analysis of a cooperative AF network with single and two relay pair selection from M available relay nodes together with clipping at the source node, which is explicitly modelled. MATLAB and Maple software based simulations are employed throughout the thesis to support the analytical results and assess the performance of algorithms and methods.

Stringent pollutant regulations on diesel-powered vehicles have resulted in the development of new technologies to reduce emission of nitrogen oxides (NOx). The urea Selective Catalyst Reduction (SCR) system and Lean NOx Trap (LNT) have become the two promising solutions to this problem. Whilst the LNT results in a fuel penalty due to periodic regeneration, the SCR system with aqueous urea solution or ammonia gas reductants could provide a better solution with higher NOx reduction efficiency. This thesis describes an experimental investigation which has been designed for comparing the effect NOx abatement of a SCR system with AdBlue urea spray and ammonia gas at 5% and 4% concentration. For this study, a SCR exhaust system comprising of a diesel particulate filter (DPF), a diesel oxidation catalyst (DOC) and SCR catalysts was tested on a steady state, direct injection 1998 cc diesel engine. It featured an expansion can, nozzle and diffuser arrangement for a controlled flow profile for CFD model validation. Four different lengths of SCR catalyst were tested for a space velocity study. Chemiluminescence (CLD) based ammonia analysers have been used to provide high resolution NO, NO2 and NH3 measurements across the SCR exhaust system. By measuring at the exit of the SCR bricks, the NO and NO2 profiles within the bricks were found. Comparison of the measurements between spray and gas lead to insights of the behaviour of the droplets upstream and within the SCR bricks. From the analysis, it was deduced that around half to three quarters of the droplets from the urea spray remain unconverted at the entry of the first SCR brick. Approximately 200 ppm of potential ammonia was released from the urea spray in the first SCR brick to react with NOx. The analysis also shows between 10 to 100 ppm of potential ammonia survived through the first brick in droplet form for cases from NOx-matched spray input to excess spray. Measurements show NOx reduction was complete after the second SCR bricks. Experimental and CFD prediction showed breakthrough of all species for the short brick with gas injection due to the high space velocity. The long brick gas cases predictions gave reasonable agreement with experimental results. NO2 conversion efficiency was found higher than NO which contradicts with the fast SCR reaction kinetics. Transient response was observed in both cases during the NOx reduction, ammonia absorption and desorption process. From the transient analysis an estimate of the ammonia storage capacity of the bricks was derived. The amount of ammonia slippage was obtained through numerical integration of the ammonia slippage curve using an excel spreadsheet. Comparing the time constant for the spray and gas cases, showed a slightly faster time response from the gas for both NOx reduction and ammonia slippage.

Eine langdauernde Vorinkubation des GPI bzw. des MVD mit Morphin-haltiger Nährlösung (unter in vitro-Bedingungen wird anstelle von Morphin häufig Normorphin verwendet) führte zur Entwicklung von Toleranz und im Falle des GPI zu einer zusätzlichen Abhängigkeits-ähnlichen Reaktion. Die Toleranz manifestierte sich als verminderte Ansprechbarkeit gegenüber dem in Anwesenheit des Morphins akut applizierten Normorphin, während die Gewebeabhängigkeit sich als starke Naloxon-induzierte Kontraktion bemerkbar machte. Diese Kontraktion beruhte auf einer massiven Ausschüttung von Acetylcholin aus den postganglionär parasympathischen Nervenendigungen. Als Erklärung wurde hinzugezogen, dass Naloxon das Morphin von seinen Rezeptoren verdrängt und eine entzugsähnliche Reaktion auslöst. Da nicht nur eine in vitro-Vorinkubation mit Morphin in den beiden Präparaten zur Empfindlichkeitsabnahme gegenüber Morphin/Normorphin führte sondern auch die mehrtägige, subkutane Implantation eines Morphin-Pellets oder einer Opioid-Lösung enthaltenden osmotischen Minipumpe, haben wir über den letzteren Weg selektive Toleranz gegenüber μ- (Morphin, Fentanyl), δ- (DADLE) und κ-Agonisten (Ethylketocyclazocin, MR 2034, MRZ) hervorgerufen. Nach in vivo-Behandlung mit den genannten Substanzen wurde das GPI präpariert, in einer Nährlösung, die den jeweiligen Agonisten in der ungefähr 80-fachen Toleranz-induzierenden Kon-zentration enthielt, aufgehängt und mit Feldelektroden elektrisch stimuliert. Die Reizparameter wurden so gewählt (supramaximale Spannung, 0.5 ms Reizbreite, 0.1 Hz Frequenz), dass ausschließlich das neuronale Gewebe stimuliert wurde, nicht aber der Glattmuskel. In vorhergehenden Experimenten konnte die Rezeptorausstattung des GPI nicht eindeutig identifiziert werden. Mit der Erzeugung der selektiven Toleranz an µ-Rezeptoren wurde die akute Wirkung von sowohl μ- als auch δ-Rezeptor-Agonisten wesentlich vermindert. Demgegenüber, übten κ-Rezeptor-Agonisten ihre Wirkung in unveränderter Intensität aus. Die vollständige Kreuz-Toleranz zwischen Morphin und DADLE schloss das Vorhandensein eines δ-Rezeptors aus, während die fehlende Kreuz-Toleranz zwischen Normorphin/DADLE einerseits und Ethylketocyclazocin andererseits das Vorhandensein eines κ-Rezeptors belegte. Es bedarf einer Erklärung, weshalb die in vivo-Behandlung mit Fentanyl nur geringe Toleranz gegenüber Normorphin auslöste und vice versa (wenig Kreuz-Toleranz), obwohl sich eine hochgradige Toleranz gegenüber derselben Substanz entwickelte. Es wurde geschlussfolgert, dass es verschiedene Subtypen von μ-Rezeptoren gibt, eines mit Empfindlichkeit gegenüber Morphin/Normorphin und ein anderes gegenüber Fentanyl.

Abstract In this paper, we examine the behavior of subjects in a mock financial investment experiment to investigate the effects of “skin in the game” and ego utility on hedonic information acquisition decisions. We observe how often subjects “check” their portfolios after given general market returns, and whether conditions impact the existence and magnitude of the ostrich effect – the tendency to avoid information expected to be negative. When considering these experiment conditions as well as subject sex, risk aversion, curiosity, financial literacy and investing experience, we do not find an ostrich effect. We do find that females check their portfolios more often on average than males. Finally, we find that risk-averse people will check their portfolios more often, regardless of market returns or sex.

International Telemetering Conference Proceedings / October 22-25, 2001 / Riviera Hotel and Convention Center, Las Vegas, Nevada / Design, performance Test and Evaluation (T&E) of a novel smart diversity receiver, based on Feher Diversity (FD) patents over multipath, fast dynamic frequency selective fading channels is presented. A hardware simulator for construction of a frequency selective fading channel has been implemented in laboratory to resemble a telemetry aeronautical channel model, namely the two-path channel model. As an illustrative example, the block error rate (BLER) of a 1 Mb/s rate IRIG 106-00 and CCSDS standardized Feher’s patented quadrature phase shift keying (FQPSK) [1][2] with and without diversity in multipath frequency selective fading channels has been tested and evaluated. The experimental results clearly indicate significant performance improvement with the proposed diversity technique even in cases of severely distorted channels.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / In this paper, we propose applying the spatio-temporal signal processing and OFDM techniques to a multiple-antenna system in order to achieve high data rate and high performance transmission capability. In order to perform real time processing for this system, we also propose a complexity reduced QR beamforming algorithm. The performance of the proposed system has been investigated for a two-ray frequency-selective fading model by extensive computer simulations. These results show that significant benefits can be realized in terms of lower bit error rate and higher data transmission rate.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / Three Quadrature Phase Shift Keying (QPSK) mapped COFDM systems demonstrating a continuum of complexity levels are simulated over an evolving three ray model of the multipath fading channel with parameters interpolated from actual channel sounding experiments. The first COFDM system uses coherent QPSK and convolutional coding with interleaving in frequency, channel equalization and soft decision decoding; the second uses convolutional coding with interleaving in frequency, Differential Phase Shift Keying (DPSK) and soft decision decoding; the third system uses a quaternary BCH code with DPSK mapping and Error and Erasure Decoding (EED). All three systems are shown to be able to provide reliable data communication during frequency selective fade events. Simulations demonstrate QPSK mapped COFDM with reasonable complexity performs well in a multipath frequency selective fading environment under parameters typically encountered in aeronautical telemetry.

Thesis (MSc)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: The aim of this thesis was to study structure-property relationships in porous materials using various adapted analytical techniques and in-house instruments. The thesis is divided into two sections, and the first section of work constitutes the majority of the thesis. The first section of work deals with the theoretical versus experimental classification of sorption selectivity in porous compounds. A transiently porous metallocycle that can adsorb acetylene and carbon dioxide served as a model host for this experiment. A volumetric sorption instrument had to be constructed to carry out sorption with acetylene. Even though the metallocycle should theoretically be selective for acetylene over carbon dioxide based on single-gas sorption isotherms, this was not the case during the sorption of a mixture of the two gases. Furthermore, high-pressure single-crystal diffraction was carried out utilising an in-house environmental gas cell, and structural elucidation indicated that both acetylene and carbon dioxide coexist in a single cavity of the host. Additional complementary techniques are discussed that were used to confirm that both gases are present in a single host cavity. The techniques included infrared spectroscopy as well as high-pressure florescence and Raman spectroscopy, which had to be conducted with a specially designed pressure vessel and with adapted instrumentation. Finally, density functional theory calculations were employed to explain how host-guest and guest-guest interactions lead to the change in adsorption selectivity. It is concluded that researchers need to show experimentally that a compound is selective for the adsorption of a specific gas, because theoretical models are not always accurate. The second part of this work focuses on a fundamental study of the structure-property relationships in a porous hydrogen-bonded organic framework. The section starts off by exploring the activation conditions and thermal stability of the framework. This is followed by an exploration of a possible phase transformation or thermal expansion in the framework, but neither of these occurred. Thereafter, an extended study of the framework’s sorption behaviour with various gases is discussed. Then, a structural study of its solvated phase is used to explain the framework’s stability. Finally, a novel analytical method is introduced, and two examples are used to demonstrate why the instrument is useful in the field of supramolecular chemistry. The chapter is concluded by stating the importance these fundamental studies, as well the development of new analytical techniques. / AFRIKAANSE OPSOMMING: Die doel van hierdie tesis was om die struktuur-afhanklike eienskappe van poreuse materiale te ondersoek. Die studie het gebruik gemaak van verskeie aangepasde analitiese metodes asook instrumente wat spesifiek vir die studie gebou was. Die werk word in twee dele verdeel, en die meerderheid van die tesis word in die eerste deel bevat. In die eerste deel van die tesis word die validiteit van teoretiese- teen eksperimentele adsorpsie selektiwiteit opgeweeg. ʼn Gasheer wat bestaan uit ringvormige koördinasie-verbindings en wat asetileen asook koolstof dioksied kan adsorbeer, dien as ʼn model gasheer vir die studie. ʼn Volumetriese sorpsie instrument was spesiaal vir die studie gebou sodat asetileen sorpsie gedoen kon word. Volgens asetileen en koolstof dioksied se enkel-gas adsorpsie isoterme moet asetileen teoreties met voorkeur geadsorbeer word gedurende ʼn adsorpsie eksperiment waarin beide gasse teenwoordig is, maar eksperimenteel was dit bepaal dat dit nie so is nie, dus is daar ʼn verandering in die gasheer se adsorpsie selektiwiteit. Hierna word strukturele data van die gasheer, onder ʼn hoë druk van die gas mengsel, versamel deur gebruik te maak van enkel-kristal diffraksie en ʼn spesiaal-gemaakde gas sel. Die strukturele data toon dat beide asetileen en koolstof dioksied teenwoordig is binne elke porie van die gasheer. Daar word dan van addisionele analitiese metodes gebruik te maak om die observasie te bevestig. Die analitiese metodes sluit in infrarooi spektroskopie asook hoë-druk fluoressensie en Raman spektroskopie wat geëis het dat ʼn spesiale druk-bestande monster houer gebou moes word en dat analitiese instrumente gemodifiseer moet word. Ten slotte was daar van “density functional theory” gebruik gemaak om te verduidelik dat die interaksie tussen die gasheer en gas sowel as die interaksie tussen twee gasse lei tot die verandering in adsorpsie selektiwiteit. Uit hierdie bevinding word die gevolgtrekking gemaak dat navorsers met meer eksperimentele data vorendag sal moet kom voordat ʼn gevolgtrekking gemaak kan word dat ʼn raamwerk selektief een gas adsorbeer. Die tweede afdeling van die werk fokus op ʼn fundamentele studie van die struktuur-afhanklike eienskappe van ʼn poreuse waterstof-verbinde organies raamwerk. Die afdeling begin deur ʼn ondersoek van die aktivering kondisies sowel as die temperatuur-afhanklike stabiliteit van die raamwerk. Dit word gevolg deur te soek na moontlike fase veranderings of temperatuur-afhanklike uitsetting van die raamwerk, maar nie een van die twee eienskappe word waargeneem nie. Daarna word die deeglike ondersoek van die raamwerk se adsorpsie vermoë met verskeie gasse bespreek. Dit word gevolg deur ʼn strukturele studie van die solvaat van die raamwerk, wat dan gebruik word om die stabiliteit van die raamwerk te verduidelik. Ten slotte word ʼn analitiese metode bekend gestel, en twee voorbeelde word gebruik om te wys hoe nuttig die metode is om ʼn kombinasie van resultate te bekom. Die hoofstuk word saamgevat deur te verduidelik hoekom dit belangrik is om hierdie tipe fundamentele studies te doen asook waarom nuwe analitiese metodes ontwerp moet word.

This study reports on investigation of ways of improving the breeding programme for growth-related traits in common carp in Vietnam. The base population was synthesized following a single pair mating scheme from six carp stocks: (1) 2nd generation of family selection; (2) Hungarian 6th generation of mass selection; (3) Hungarian scaled carp; (4) Indonesian yellow 6th generation of mass selection; (5) Indonesian yellow carp; and (6) Vietnamese 6th generation of mass selection. The next two selected generations were produced using a partial factorial mating scheme, with each family being split and reared using communal early rearing (CER) or separate early rearing (SER) methods. The second generation (G2) was produced from selected fish from the CER G1 group. The total number of selection, control and reference families was 135 in the G1 and 101 in the G2 respectively. The control and reference (Hungarian P33 line) families were produced by single pair mating (reference families with the G2 only). Seven microsatellite loci were used for parentage assignment in the CER groups: 96.8% of the offspring (1284 individuals) and 96.2% offspring (1341 individuals) were unambiguously assigned to 113 families (selection, control) in the G1 and 99 families (selection, control and reference) in the G2 generations, respectively. Restricted maximum likelihood in the individual model was used to estimate phenotypic and genetic parameters. In CER, the estimated heritability values of common carp were from 0.20 ± 0.04 to 0.29 ± 0.05 for both weight and length at final harvest, indicating substantial additive genetic variation for selection on growth-related traits. The overall obtained maternal and common environmental effects were consistently close to zero. The average of direct response to selection for body weight was 15.0% per generation. In SER, the number of families in the G1 and G2 were 135 (selection and control) and 101 (selection, control and reference), respectively. The heritability estimates were from 0.20 ± 0.07 to 0.31 ± 0.08 at final measurement. Common environmental (full-sib family) effect were all lower at tagging and slightly higher at last measurement, ranging from 0.05 to 0.22. The response in each generation of selection as the difference between the selection and control lines was 8.1% on average for weight at final harvest, lower than under CER. The high genetic correlations of growth-related traits between the third (one year old, mature) and second (7 months old) measurements could allow selection to be based on the earlier assessment, reducing handling stress close to spawning. The benefits of using microsatellite markers to ascertain parentage, achieve greater growth rate (close to farming systems), shorten time to maturity and selection, and the overall relative merits of using CER v’s SER in this genetic improvement programme are discussed.

This thesis proposes a metallic hole array of a rectangular converging-diverging channel (RCDC) shape with extraordinary transmission. We use a three-dimensional (3D) finite element method to analyze the transmission characteristics of two-dimensional metallic hole arrays (2D-MHA) with RCDC. For a straight channel MHA, when the aperture size is reduced, the transmission peaks have a blue-shift. The same result is observed for a smaller gap throat for the RCDC structure. For the rectangular holes with a high length-width ratio, a similar blue-shift in the transmission peaks as well as a narrower full width at half maximum (FWHM) are observed. The asymmetry from the rectangular shape gives this structure high selectivity for light with different polarizations. Furthermore, the RCDC shape gives extra degrees of geometrical variables to 2D-MHA for tuning the location of the transmission peak and FWHM. The tunable transmission property of this structure shows promise for applications in tunable filters, photonic circuits, and biosensors. / text