This thesis focuses on research I have done on ytterbium-doped femtosecond fiber lasers. These lasers operate in the near infrared region, lasing at 1030 nm. This wavelength is particularly important in biomedical applications, which includes but is not limited to confocal microscopy and ablation for surgical incisions. Furthermore, fiber lasers are advantageous compared to solid state lasers in terms of their cost, form factor, and ease of use. Solid state lasers still dominate the market due to their comparatively high energy pulses. High energy pulse generation in fiber lasers is hindered by either optical wave breaking or by multipulsing. One of the main challenges for fiber lasers is to overcome these limitations to achieve high energy pulses. The motivation for the work done in this thesis is increasing the output pulse peak power and energy. The main idea of the work is that decreasing the nonlinearity that acts on the pulse inside the cavity will prevent optical wave breaking, and thus will generate higher energy pulses. By increasing the output energy, ytterbium-doped femtosecond fiber lasers can be competitive with solid state lasers which are used commonly in research. Although fiber lasers tend to lack the wavelength tuning ability of solid state lasers, many biomedical applications take advantage of the 1030 µm central wavelength of ytterbium-doped fiber lasers, so the major limiting factor of fiber lasers in this field is simply the output power. By increasing the output energy without resorting to external amplification, the cavity is optimized and cost can remain low and economical. During verification of the main idea, the cavity was examined for possible back-reflections and for components with narrow spectral bandwidths which may have contributed to the presence of multipulsing. Distinct cases of multipulsing, bound pulse and harmonic mode-locking, were observed and recorded as they may be of more interest in the future. The third-order dispersion contribution from the diffraction gratings inside the laser cavity was studied, as it was also considered to be an energy-limiting factor. No significant effect was found as a result of third-order dispersion; however, a region of operation was observed where two different pulse regimes were found at the same values of net cavity group velocity dispersion. Results verify the main idea and indicate that a long length of low-doped gain fiber is preferable to a shorter, more highly doped one. The low-doped fiber in an otherwise equivalent cavity allows the nonlinear phase shift to grow at a slower rate, which results in the pulse achieving a higher peak power before reaching the nonlinear phase shift threshold at which optical wave breaking occurs. For a range of net cavity group velocity dispersion values, the final result is that the low doped fiber generates pulses of approximately twice the value of energy of the highly-doped gain fiber. Two techniques of mode-locking cavities were investigated to achieve this result. The first cavity used NPE mode-locking which masked the results, and the second used a SESAM for mode-locking which gave clear results supporting the hypothesis.

This thesis focuses on research I have done on ytterbium-doped femtosecond fiber lasers. These lasers operate in the near infrared region, lasing at 1030 nm. This wavelength is particularly important in biomedical applications, which includes but is not limited to confocal microscopy and ablation for surgical incisions. Furthermore, fiber lasers are advantageous compared to solid state lasers in terms of their cost, form factor, and ease of use. Solid state lasers still dominate the market due to their comparatively high energy pulses. High energy pulse generation in fiber lasers is hindered by either optical wave breaking or by multipulsing. One of the main challenges for fiber lasers is to overcome these limitations to achieve high energy pulses. The motivation for the work done in this thesis is increasing the output pulse peak power and energy. The main idea of the work is that decreasing the nonlinearity that acts on the pulse inside the cavity will prevent optical wave breaking, and thus will generate higher energy pulses. By increasing the output energy, ytterbium-doped femtosecond fiber lasers can be competitive with solid state lasers which are used commonly in research. Although fiber lasers tend to lack the wavelength tuning ability of solid state lasers, many biomedical applications take advantage of the 1030 µm central wavelength of ytterbium-doped fiber lasers, so the major limiting factor of fiber lasers in this field is simply the output power. By increasing the output energy without resorting to external amplification, the cavity is optimized and cost can remain low and economical. During verification of the main idea, the cavity was examined for possible back-reflections and for components with narrow spectral bandwidths which may have contributed to the presence of multipulsing. Distinct cases of multipulsing, bound pulse and harmonic mode-locking, were observed and recorded as they may be of more interest in the future. The third-order dispersion contribution from the diffraction gratings inside the laser cavity was studied, as it was also considered to be an energy-limiting factor. No significant effect was found as a result of third-order dispersion; however, a region of operation was observed where two different pulse regimes were found at the same values of net cavity group velocity dispersion. Results verify the main idea and indicate that a long length of low-doped gain fiber is preferable to a shorter, more highly doped one. The low-doped fiber in an otherwise equivalent cavity allows the nonlinear phase shift to grow at a slower rate, which results in the pulse achieving a higher peak power before reaching the nonlinear phase shift threshold at which optical wave breaking occurs. For a range of net cavity group velocity dispersion values, the final result is that the low doped fiber generates pulses of approximately twice the value of energy of the highly-doped gain fiber. Two techniques of mode-locking cavities were investigated to achieve this result. The first cavity used NPE mode-locking which masked the results, and the second used a SESAM for mode-locking which gave clear results supporting the hypothesis.

This thesis focuses on research I have done on ytterbium-doped femtosecond fiber lasers. These lasers operate in the near infrared region, lasing at 1030 nm. This wavelength is particularly important in biomedical applications, which includes but is not limited to confocal microscopy and ablation for surgical incisions. Furthermore, fiber lasers are advantageous compared to solid state lasers in terms of their cost, form factor, and ease of use. Solid state lasers still dominate the market due to their comparatively high energy pulses. High energy pulse generation in fiber lasers is hindered by either optical wave breaking or by multipulsing. One of the main challenges for fiber lasers is to overcome these limitations to achieve high energy pulses. The motivation for the work done in this thesis is increasing the output pulse peak power and energy. The main idea of the work is that decreasing the nonlinearity that acts on the pulse inside the cavity will prevent optical wave breaking, and thus will generate higher energy pulses. By increasing the output energy, ytterbium-doped femtosecond fiber lasers can be competitive with solid state lasers which are used commonly in research. Although fiber lasers tend to lack the wavelength tuning ability of solid state lasers, many biomedical applications take advantage of the 1030 µm central wavelength of ytterbium-doped fiber lasers, so the major limiting factor of fiber lasers in this field is simply the output power. By increasing the output energy without resorting to external amplification, the cavity is optimized and cost can remain low and economical. During verification of the main idea, the cavity was examined for possible back-reflections and for components with narrow spectral bandwidths which may have contributed to the presence of multipulsing. Distinct cases of multipulsing, bound pulse and harmonic mode-locking, were observed and recorded as they may be of more interest in the future. The third-order dispersion contribution from the diffraction gratings inside the laser cavity was studied, as it was also considered to be an energy-limiting factor. No significant effect was found as a result of third-order dispersion; however, a region of operation was observed where two different pulse regimes were found at the same values of net cavity group velocity dispersion. Results verify the main idea and indicate that a long length of low-doped gain fiber is preferable to a shorter, more highly doped one. The low-doped fiber in an otherwise equivalent cavity allows the nonlinear phase shift to grow at a slower rate, which results in the pulse achieving a higher peak power before reaching the nonlinear phase shift threshold at which optical wave breaking occurs. For a range of net cavity group velocity dispersion values, the final result is that the low doped fiber generates pulses of approximately twice the value of energy of the highly-doped gain fiber. Two techniques of mode-locking cavities were investigated to achieve this result. The first cavity used NPE mode-locking which masked the results, and the second used a SESAM for mode-locking which gave clear results supporting the hypothesis.

Cette thèse concerne l'étude de la dynamique des structures optiques dissipatives observées dans une cavité à gestion de dispersion utilisant l'évolution non linéaire de la polarisation comme technique de blocage de modes. Nous avons montré expérimentalement l'existence d'une transition graduelle entre le régime de fonctionnement continu et le régime de fonctionnement multi-impulsionnel. Nous nous sommes intéressés à l'état intermédiaire où il nous a été possible d'obtenir divers régimes inédits et d'étudier ainsi le comportement collectif des solitons dissipatifs en présence d'un fond continu. La dynamique de "la pluie de solitons" est une manifestation complexe et fascinante constituée de trois composantes de champ : le fond continu, les solitons de dérive et la phase condensée. Elle s'accompagne d'une circulation d'énergie à travers ces trois composantes. Le mouvement relatif des solitons de dérive ainsi que l'asymétrie temporelle présentent les caractéristiques majeures qui distinguent cette dynamique des autres. D'autres types d'auto-organisation ont été observés et étudiés, comme "le relargage des solitons de la phase condensée" ou bien encore "la vobulation du train de solitons". Nous nous sommes intéressés aussi à la propagation d'une seule impulsion dans la cavité. Pour la première fois, une importante dynamique de respiration spectrale a été prédite dans une cavité à gestion de la dispersion. Nous avons montré qu'une compression temporelle de l'impulsion est accompagnée d'un élargissement spectral d'une grande ampleur dans la partie passive de la cavité et que la largeur de l'impulsion peut dépasser la largeur de la bande passante du milieu amplificateur. Nous avons étudié la dynamique de la respiration spectrale, l'extraction et l'optimisation du signal laser en fonction des paramètres de la cavité et nous avons présenté les caractéristiques d'une cavité qui permet la génération d'une impulsion dont sa largeur spectrale est supérieure à la largeur de la bande passante de l'amplificateur d'un facteur de 2.4. Les dynamiques présentées dans cette thèse témoignent de la complexité et de la richesse de la dynamique dissipative des lasers à fibre fonctionnant en régime de blocage de modes passif par évolution non linéaire de la polarisation. / This thesis presents a study of the nonlinear dissipative dynamics of localized of self organized structures in passively mode-locked fiber laser through nonlinear polarization evolution. We reveal the existence of a gradual transition from the quasi-cw to mode locked dynamics in the multi-pulsing regime. We emphasize on the intermediate state, where various new dynamics are observed. We study collective behaviors of dissipative solitons in the presence of a continuous background. One of the complex and attractive dynamics presented is the "soliton rain", which composed of three field components : continuous modes of background, drifting of solitons and condensed phase solitons. This dynamic appears when the energy flows through the three components. The relative motion of the drifting solitons and the temporal asymmetry present the major characteristics that distinguish this dynamic. Other types of self-organizations of solitons were observed and studied as the "release of the solitons from the condensed phase" and the "chirped trains with condensed soliton phase". We were also interested in the single pulse propagation. For the first time, an important dynamics of spectral breathing was predicted in a dispersion-managed cavity. We showed that pulse compression dynamics in the passive anomalous fiber can be accompanied by a significant enhancement of the spectral width and that the width of the pulse can exceed the amplifier bandwidth. We studied, the extraction and the optimization of the signal laser according to the parameters of the cavity and we presented the characteristics of a cavity delivering ultra short pulses with a spectral width exceeding the amplifier bandwidth by a factor of 2.4. The dynamics presented in this thesis show the complexity and variety of the dissipative dispersion-managed dynamics in fiber laser mode locked through nonlinear polarization evolution.