This thesis examines the sensitivity of the marine controlled source electromagnetic (CSEM) method to sub-seafloor resistivity structure, with a focus on gas hydrate and free gas occurrences. Different analysis techniques are applied with progressive sophistication to a series of studies based on simulated and measured data sets. CSEM data are modelled in time domain for one-dimensional models with gas hydrate, free gas and/or permafrost occurrences. Linearized and non-linear inversion methods are considered to infer subsurface models from CSEM data. One study applies forward modelling and singular value decomposition to estimate uncertainties for permafrost models of the Beaufort Sea. This simulation study analyzes the resolution of the CSEM data for shallow water depth which is a challenging case because the electromagnetic signature of the air-water boundary may mask the sub-seafloor response. The results reveal a blind window as a function of water depth in which the CSEM data are insensitive to the sub-seafloor structure. However, the CSEM data are sensitive to the top and the bottom of the permafrost with increasing uncertainties with depth. The next study applies non-linear Bayesian inversion to CSEM data acquired in 2005/2006 on the Northern Cascadia margin to investigate sub-seafloor resistivity structure related to gas hydrate deposits and cold vents. Bayesian inversion provides a rigorous approach to estimate model parameters and uncertainties by probabilistically sampling of the parameter space. The resulting probability density function is interpreted here in terms of posterior median models, marginal and joint marginal probability densities for model parameters and credibility intervals. The Bayesian information criterion is applied to determine the amount of structure (number of layers) that can be resolved by the data. The parameter space is sampled with the Metropolis-Hastings algorithm in principal-component space. Non-linear, probabilistic inversion allows the analysis of unknown acquisition parameters such as time delays between receiver and transmitter clocks or unknown source amplitude. The estimated posterior median models and credibility intervals from Bayesian CSEM inversion are compared to reflection seismic data to provide a more complete geological interpretation. The CSEM data on the Northern Cascadia margin generally reveal a 1 to 3 layer sediment structure. Inversion results at the landward edge of the gas hydrate stability zone indicate a sediment unconformity as well as several potential cold vents which were previously unknown. The resistivities generally increase upslope due to sediment erosion along the slope. Inversion results on the middle slope infer several vent systems close to well-known Bullseye vent in agreement with ongoing interdisciplinary observations. Finally, a trans-dimensional (trans-D) Bayesian inversion is applied to CSEM data acquired in 2012 in the German North Sea to investigate possible free gas occurrences. Trans-D inversion treats the number of layers as an additional unknown sampled probabilistically in the inversion. %over the parameter space by evaluating probabilistically the transition to a higher or lower number of interfaces. Parallel tempering is applied to increase sampling efficiency and completeness. Inversion results for the German North Sea yield resistivities at the seafloor which are typical for marine deposits, while resistivities at greater depth increase slightly and can be correlated with a transition from fine-grained marine deposits (Holocene age) to coarse-grained, glacial sediments (Pleistocene age), which is observed in a sediment core. The depths of layer interfaces estimated from CSEM inversion match the seismic reflector related to the contrast between the two depositional environments. The CSEM survey targeted a strong, phase-reversed, inclined seismic reflector within the glacial sediments, potentially indicating free gas. While interface-depth estimates from CSEM inversion do not correlate closely with this reflector, resistivities are generally elevated above the strong seismic amplitudes and the thickness of the resistive layer follows the trend of the inclined reflector. However, the uncertainties of deeper interface depth estimates increase significantly and overlap with the targeted reflector at some of the measurement sites. Relatively low resistivities of a third layer correlate with sediments of late-Miocene origin with a high gamma-ray count indicating an increased amount of fine-grained sediments with organic material. The interface at the bottom of the third layer has wide uncertainties which relates to the penetration limit of the CSEM array. / Graduate

The primary focus of this thesis is to examine the detailed seismic structure of the northern Cascadia margin, including the Cascadia basin, the deformation front and the continental shelf. The results of this study are contributing towards understanding sediment deformation and tectonics on this margin. They also have important implications for exploration of hydrocarbons (oil and gas) and natural hazards (submarine landslides, earthquakes, tsunamis, and climate change). The first part of this thesis focuses on the role of gas hydrate in slope failure observed from multibeam bathymetry data on a frontal ridge near the deformation front off Vancouver Island margin using active-source ocean bottom seismometer (OBS) data collected in 2010. Volume estimates (∼ 0.33 km^3) of the slides observed on this margin indicate that these are capable of generating large (∼ 1 − 2 m) tsunamis. Velocity models from travel time inversion of wide angle reflections and refractions recorded on OBSs and vertical incidence single channel seismic (SCS) data were used to estimate gas hydrate concentrations using effective medium modeling. Results indicate a shallow high velocity hydrate layer with a velocity of 2.0 − 2.1 km/s that corresponds to a hydrate concentration of 40% at a depth of 100 m, and a bottom simulating reflector (BSR) at a depth of 265 − 275 m beneath the seafloor (mbsf). These are comparable to drilling results on an adjacent frontal ridge. Margin perpendicular normal faults that extend down to BSR depth were also observed on SCS and bathymetric data, two of which coincide with the sidewalls of the slump indicating that the lateral extent of the slump is controlled by these faults. Analysis of bathymetric data indicates, for the first time, that the glide plane occurs at the same depth as the shallow high velocity layer (100±10 mbsf). In contrast, the glide plane coincides with the depth of the BSR on an adjacent frontal ridge. In either case, our results suggest that the contrast in sediments strengthened by hydrates and overlying or underlying sediments where there is no hydrate is what causing the slope failure on this margin. The second part of this dissertation focuses on obtaining the detailed structure of the Cascadia basin and frontal ridge region using mirror imaging of few widely spaced OBS data. Using only a small airgun source (120 cu. in.), our results indicate structures that were previously not observed on the northern Cascadia margin. Specifically, OBS migration results show dual-vergence structure, which could be related to horizontal compression associated with subduction and low basal shear stress resulting from over-pressure. Understanding the physical and mechanical properties of the basal layer has important implications for understanding earthquakes on this margin. The OBS migrated image also clearly shows the continuity of reflectors which enabled the identification of thrust faults, and also shows the top of the igneous oceanic crust at 5−6 km beneath the seafloor, which were not possible to identify in single-channel and low-fold multi-channel seismic (MCS) data. The last part of this thesis focuses on obtaining detailed seismic structure of the Vancouver Island continental shelf from MCS data using frequency domain viscoacoustic full waveform inversion, which is first of its kind on this margin. Anelastic velocity and attenuation models, derived in this study to subseafloor depths of ∼ 2 km, are useful in understanding the deformation within the Tofino basin sediments, the nature of basement structures and their relationship with underlying accreted terranes such as the Crescent and the Pacific Rim terranes. Specifically, our results indicate a low-velocity zone (LVZ) with a contrast of 200 m/s within the Tofino basin sediment section at a depth 600 − 1000 mbsf over a lateral distance of 10 km. This LVZ is associated with high attenuation values (0.015 − 0.02) and could be a result of over pressured sediments or lithology changes associated with a high porosity layer in this potential hydrocarbon environment. Shallow high velocities of 4 − 5 km/s are observed in the mid-shelf region at depths > 1.5 km, which is interpreted as the shallowest occurrence of the Eocene volcanic Crescent terrane. The sediment velocities sharply increase about 10 km west of Vancouver Island, which probably corresponds to the underlying transition to the Mesozoic marine sedimentary Pacific Rim terrane. High attenuation values of 0.03 − 0.06 are observed at depths > 1 km, which probably corresponds to increased clay content and the presence of mineralized fluids. / Graduate / 0373 / 0372 / 0605 / subbarao@uvic.ca