This thesis investigates a newly developed and patented technology for its ability to inactivate spore- forming bacteria and non-spore-forming microorganisms. This new technology “Pressure Assisted Thermal Sterilization©” (PATS) is based on the theory of the thermal expansion of liquids. The efficiency of inactivating spore-forming and non-spore-forming microorganisms by PATS was compared with the thermal treatment alone. A combination treatment consisting of high pressure processing and gaseous carbon dioxide was also investigated for its ability to inactivate bacterial spores in model and real food matrices. The structural damage caused by treatments to the spores and non-spore-forming bacteria was assessed by scanning electron microscopy. Geobacillus stearothermophilus spores suspended in Milli-Q water, UHT milk and pumpkin soup, treated by PATS were found to have significantly lower decimal reduction times (D values) compared with the thermal treatment alone. Spores suspended in UHT milk were more heat resistant compared with those in Milli-Q water and pumpkin soup. Bacillus cereus spores suspended in Milli-Q water and pumpkin soup treated with PATS were more effectively inactivated compared with spores treated by the thermal treatment alone. Clostridium botulinum spores in saline buffer subjected to PATS treatment were inactivated more effectively compared with the thermal treatment alone. Overall, the results show that PATS was a better processing technique for inactivation of bacterial spores compared with thermal treatment alone. However, PATS had no added benefit in inactivating the non-spore-forming bacteria Escherichia coli and Saccharomyces cerevisiae cells compared with the thermal treatment. A shelf life study showed that B. cereus spores in pumpkin soup retained a low spore count (<5 LogCFU/mL) for approximately 40 days in 30oC storage after treatment with PATS. No additional degradation of colour pigments of pumpkin soup and model pumpkin juice was observed following PATS compared with the thermal treatment. Spore-forming microorganisms can be resistant to pressure treatment alone, which limits the application of high pressure processing (HPP). Therefore, a combination approach was investigated. The mechanism of inactivating spores by combining HPP with other treatments is that the pressure assists in spore germination. Then a secondary treatment (thermal or CO2 gas) can be used to inactivate the germinated spores. A combined application of HPP and a consecutive CO2 treatment was investigated for the efficiency of spore inactivation. Results showed that HPP (200 MPa for 30 min) followed by a CO2 treatment inactivated Bacillus subtilis 168 in nutrient broth, tomato juice and liquid whole egg by 2.5, 1.0 and 1.5 LogCFU/mL respectively. These results indicated that this technique is inadequate for practical use. Scanning electron micrographs showed that pressure processing of B. subtilis 168 and B. subtilis natto spores resulted in deformation of the spore structure. This structural deformation of spores may have been due to water absorption during HPP and subsequent release upon decompression. PATS treated G. stearothermophilus and B. cereus spores were more severely damaged compared with the same spores which underwent thermal treatment alone. However, the extent to which E. coli and S. cerevisiae cells were damaged by both PATS and thermal treatment was similar.

This thesis investigates a newly developed and patented technology for its ability to inactivate spore- forming bacteria and non-spore-forming microorganisms. This new technology “Pressure Assisted Thermal Sterilization©” (PATS) is based on the theory of the thermal expansion of liquids. The efficiency of inactivating spore-forming and non-spore-forming microorganisms by PATS was compared with the thermal treatment alone. A combination treatment consisting of high pressure processing and gaseous carbon dioxide was also investigated for its ability to inactivate bacterial spores in model and real food matrices. The structural damage caused by treatments to the spores and non-spore-forming bacteria was assessed by scanning electron microscopy. Geobacillus stearothermophilus spores suspended in Milli-Q water, UHT milk and pumpkin soup, treated by PATS were found to have significantly lower decimal reduction times (D values) compared with the thermal treatment alone. Spores suspended in UHT milk were more heat resistant compared with those in Milli-Q water and pumpkin soup. Bacillus cereus spores suspended in Milli-Q water and pumpkin soup treated with PATS were more effectively inactivated compared with spores treated by the thermal treatment alone. Clostridium botulinum spores in saline buffer subjected to PATS treatment were inactivated more effectively compared with the thermal treatment alone. Overall, the results show that PATS was a better processing technique for inactivation of bacterial spores compared with thermal treatment alone. However, PATS had no added benefit in inactivating the non-spore-forming bacteria Escherichia coli and Saccharomyces cerevisiae cells compared with the thermal treatment. A shelf life study showed that B. cereus spores in pumpkin soup retained a low spore count (<5 LogCFU/mL) for approximately 40 days in 30oC storage after treatment with PATS. No additional degradation of colour pigments of pumpkin soup and model pumpkin juice was observed following PATS compared with the thermal treatment. Spore-forming microorganisms can be resistant to pressure treatment alone, which limits the application of high pressure processing (HPP). Therefore, a combination approach was investigated. The mechanism of inactivating spores by combining HPP with other treatments is that the pressure assists in spore germination. Then a secondary treatment (thermal or CO2 gas) can be used to inactivate the germinated spores. A combined application of HPP and a consecutive CO2 treatment was investigated for the efficiency of spore inactivation. Results showed that HPP (200 MPa for 30 min) followed by a CO2 treatment inactivated Bacillus subtilis 168 in nutrient broth, tomato juice and liquid whole egg by 2.5, 1.0 and 1.5 LogCFU/mL respectively. These results indicated that this technique is inadequate for practical use. Scanning electron micrographs showed that pressure processing of B. subtilis 168 and B. subtilis natto spores resulted in deformation of the spore structure. This structural deformation of spores may have been due to water absorption during HPP and subsequent release upon decompression. PATS treated G. stearothermophilus and B. cereus spores were more severely damaged compared with the same spores which underwent thermal treatment alone. However, the extent to which E. coli and S. cerevisiae cells were damaged by both PATS and thermal treatment was similar.