Global ETD Search

11	An experimental study of high heat flux removal using micro-droplet spray cooling / Cryer, Matthew A. January 2003 (has links) (PDF) Thesis (M.S. in Mechanical Engineering)--Naval Postgraduate School, June 2003. / Thesis advisor(s): Ashok Gopinath. Includes bibliographical references (p. 31-32). Also available online.
12	A photographic study of bubble behavior in a direct-contact boiler Bordley, Paul William January 1980 (has links) Thesis (B.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1980. / MICROFICHE COPY AVAILABLE IN ARCHIVES AND SCIENCE. / Includes bibliographical references. / by Paul William Bordley. / B.S. Nuclear Engineering. Bubbles Nucleate boiling
13	An experimental study of high heat flux removal using micro-droplet spray cooling Cryer, Matthew A. 06 1900 (has links) Recent studies have shown that thermophotovoltaic (TPV) technology is a promising source of high power density generation. Enhanced TPV systems can theoretically provide power densities of up to 100 W/cm2. The inherent ineffiencies in the system dictate that up to 90% of that energy is not converted to electrical power, and must be removed as waste heat to ensure that the components are maintained at a reasonable operating temperature. The present study addresses this issue by investigating the suitability of using spray cooling techniques to remove heat generated by power densities of up to 100 W/cm2. A simple, scaleable experiment was designed using low-cost commercially available components to study the effects that spray mass flux and droplet size have on the heat removal capacity of the system. A series of nozzles were used so that mass flux and droplet size could be studied independently, giving high resolution to the data so that predictive correlations could be developed over the range of parameters varied in the study. / US Naval Reserve (USNR) author. Spraying Cooling Nucleate boiling Heat Transmission
14	Effects of surface conditions on nucleation and boiling characteristics. Avtar Singh January 1975 (has links) Thesis. 1975. Sc.D.--Massachusetts Institute of Technology. Dept. of Mechanical Engineering. / Vita. / Bibliography: leaves 82-84. / Sc.D. Mechanical Engineering Surface chemistry Nucleate boiling
15	A fundamental study of boiling heat transfer mechanisms related to impulse drying Rudemiller, Gary R. 01 January 1989 (has links) No description available. Papermaking Drying Paper Heat Transmission Nucleate boiling
16	Experimental investigation of thermo-hydraulic characteristics of two-phase flow of FC72 in microchannel heat sinks Thiagarajan, Naveenan. Bhavnani, S. H. January 2009 (has links) Thesis--Auburn University, 2009. / Abstract. Includes bibliographic references (p.145-152).
17	An investigation on bubble departure in subcooled flow boiling / Stumm, Brian J. January 1993 (has links) Thesis (M.S.)--Rochester Institute of Technology, 1993. / Typescript. Includes bibliographical references (leaves 89-90).
18	A comparison of the Westinghouse and General Electric thermal design bases nuclear engineering master's thesis / Fausz, Newell. January 1977 (has links) Thesis (M.S.)--University of Michigan, 1977.
19	Pool boiling at reduced pressure with screen-laminate surface enhancements Sloan, Alison D. January 2008 (has links) Thesis (M.S.)--University of Nevada, Reno, 2008. / "December, 2008." Includes bibliographical references (leaves 54-57). Online version available on the World Wide Web.
20	Experimental and analytical investigation of the bubble nucleation characteristics in subcooled flow / Cartwright, Michael D. January 1995 (has links) Thesis (M.S.)--Rochester Institute of Technology, 1995. / Typescript. Includes bibliographical references (leaves 81-83).

Search results