71 |
A study of solid lubricants used to prevent wear and friction in powder metallurgy productionZaamout, Mahmoud January 1983 (has links)
This research continues the earlier researches on wear friction and lubrication and its application to the powder metallurgy industries. A detailed study of the parameters involved in wear and friction has been made by using the "Pin and Disc" machine with cross cylinders technique. One iron powder was chosen and compacted over a range of densities with a series of metallic stearates as admixed lubricants for the purpose of examinations. These compacts were used as the "pins" for the wear and friction apparatus, the "disc" was made from high carbon high chromium steel which is one of the steels normally used in punches and dies in the powder metallurgy industries. The wear behaviour of these compacts was studied in relation to the following parameters: applied load between compact (or pin) and disc, sliding speed, travelled distance, density and hardness of compact. These were examined for a range of stearate lubricants and the wear rates determined, these data were then related to the possible industrial life for punches and dies in powder metallurgy presses. Besides wear rate, friction forces between the compact (or pin) and disc were measured and these forces of friction were translated into coefficients of friction for each type of lubricant. The thesis presents the results of these investigations with a survey of current theories on wear and friction of metallic systems relevant to powder metallurgy. Conclusions have been drawn and suggestions made on the most useful solid lubricant necessary in the pressing of metallic powders to reduce wear and friction in production presses. Calculations have been carried out using the data collected to estimate the possible press tool wear and accordingly a possible tool life was determined for pressing with each type of ~tearate lubricant. The overall conclusion was that zinc stearate is the best solid lubricant in the five metallic stearates (Al, Na, Mg, Ca and Zn) for use in iron powder compaction.
|
72 |
The modes of action of lubricants in elastomers and elastomer compoundsNuwayri, Mohamad O. January 1988 (has links)
To modify the rheological behaviour of rubber compounds, in order to improve their processing behaviour, lubricants based on fatty acid derivatives are added at the mixing stage. This research has been directed towards identifying the modes of action of commercially available lubricants in a number of elastomers and elastomer compounds, with the objective of providing a rational basis for the further development of lubricants. The primary tool for rheological measurement was an advanced biconical rotor rheometer (Negretti TMS Rheometer); and a capillary rheometer was used to provide an independent verification of results. Conceptual and mathematical models have been proposed which provide a rational explanation and simulation of lubricant action. The conceptual model takes account of elastomer morphology, relative solubility parameters of elastomer and lubricant and chemical reactions between the lubricant and elastomer in order to explain internal lubrication, chain extension/crosslinking, solvation and external lubrication. The mathematical model simulates the primary lubricant actions of internal lubrication and chain extension/cross-linking.
|
73 |
Expression of oil from dried fish mealEinarsson, Hjalti 15 May 1953 (has links)
Graduation date: 1953
|
74 |
The antioxidant effect of edible flours derived from oil press cakes in certain fat-containing food mixturesBaker, Dinah Skinner 06 1900 (has links)
Graduation date: 1948
|
75 |
The chemical composition, certain rheological properties, and the shortening power of fatLowry, Joanne 13 May 1960 (has links)
Graduation date: 1960
|
76 |
Essence recovery from strawberry pomaceSchen, Julie A. 08 March 1978 (has links)
Graduation date: 1978
|
77 |
Lipase-catalyzed acidolysis of fish liver oil with dihydroxyphenylacetic acid in organic solvent mediaKaram, Rosalie. January 1900 (has links)
Thesis (M.Sc.). / Written for the Dept. of Food Science and Agricultural Chemistry. Title from title page of PDF (viewed 2008/05/14). Includes bibliographical references.
|
78 |
Problems in flotationMcCartney, William Henry. January 1916 (has links) (PDF)
Thesis (B.S.)--University of Missouri, School of Mines and Metallurgy, 1916. / The entire thesis text is included in file. Typescript. Illustrated by author. Title from title screen of thesis/dissertation PDF file (viewed April 20, 2009) Includes bibliographical references (p. 3).
|
79 |
Data on edible vegetable oil processesIngram, John Charavelle. January 1924 (has links) (PDF)
Thesis (Professional Degree)--University of Missouri, School of Mines and Metallurgy, 1924. / The entire thesis text is included in file. Typescript. Illustrated by author. Title from title screen of thesis/dissertation PDF file (viewed June 16, 2009)
|
80 |
The use of mineral oil as a trapping agent for volatiles produced by Ceratocystis moniliformis (Hedg.) /Whitehouse, Firth Kraft, January 1991 (has links)
Thesis (M.S.)--Virginia Polytechnic Institute and State University, 1991. / Vita. Abstract. Includes bibliographical references (leaves 111-119). Also available via the Internet.
|
Page generated in 0.0252 seconds