No description available.

The complexes Cp(,2)M(SH)(,2), where M = Ti and Zr, have been prepared and treated with S(,8) and >N-S(,x)-NN = benzimidazolyl, phthalimidyl and x = 1, 2, to give the metallacyclohexasulfanes Cp(,2)MS(,5). Reaction of Cp(,2)TI(SH)(,2) with >N-SR, where >N = phthalimidyl, succinimidyl, gave the complexes Cp(,2)Ti(S(,2)R)(,2) (R = CHMe(,2)) and Cp(,2)Ti(SR)(S(,3)R) (R = Ph, 4-C(,6)H(,4)Me). The thiolates Cp(,2)Ti(Cl)SR and Cp(,2)Ti(SR)(,2) (R = CHMe(,2), CMe(,3), Ph, 4-C(,6)H(,4)Me) were prepared for comparison. Treatment of the complexes Cp(,2)MCl(,2) with anhydrous solutions of Li(,2)E(,x) gave the complexes Cp(,2)ME(,5), where M = Ti, Zr, Hf and E = S, Se. The compounds (RCp)(,2)TiS(,5) (R = Me, SiMe(,3)),CH(,2)Cp(,2)TiS(,5), and (Me(,5)Cp)CpTiS(,5) were prepared similarly. Reaction of Li(,2)S(,x) with (Me(,5)Cp)(,2)MCl(,2) gave the metallacyclotetrasulfanes (Me(,5)Cp)(,2)MS(,3). The complex Cp(,2)Ti{S(CH(,2))(,3)S} was synthesized. Variable temperature ('1)H NMR studies established the barriers ((DELTA)G('(NOT=))) for ME(,x) and TiS(,2)C(,3) ring reversal in the above complexes. The crystal structures of Cp(,2)Ti(SPh)(S(,3)Ph), Cp(,2)MS(,5), and (Me(,5)Cp)(,2)TiS(,3) are discussed.

This Thesis describes some theoretical studies on ligated and bare clusters. Chapter 1 gives a review of the two theoretical models, Tensor Surface Harmonic Theory (TSH) and Jellium Model, accounting for the electronic structures of ligated and bare clusters. The Polyhedral Skeletal Electron Pair Theory (PSEPT), which correlates the structures and electron counts (total number of valence electrons) of main group and transition metal ligated clusters, is briefly described. A structural jellium model is developed in Chapter 2 which accounts for the electronic structures of clusters using a crystal-field perturbation. The zero-order potential we derive is of central-field form, depends on the geometry of the cluster, and has a well-defined relationship to the full nuclear-electron potential. Qualitative arguments suggest that this potential produces different energy level orderings for clusters with a nucleus with large positive charge at the centre of the cluster, enabling the spherical jellium model to be applied to alkali metal clusters seeded with magnesium and zinc. Analysis of the effects of the non-spherical perturbation on the spherical jellium shell structures leads to the conclusion that for a cluster with a closed shell electronic structure a high symmetry arrangement which is approximately or precisely close packed will be preferred. It also provides a basis for rationalising those structures, which have been predicted using ab initio calculations, of clusters with incomplete shell electronic configurations In Chapter 3, the geometric conclusions derived in the structural jellium model are developed in more detail. Alkali metal clusters with closed shell electronic configurations according to the jellium model adopt geometries of high symmetry and based on the T_d , O_h and I_h point groups. For high nuclearity clusters alternative high symmetry structures can occur and those which are either the most close packed or spherical are predicted to be the most stable. When the jellium closed shell "magic numbers" coincides with one of these high symmetry structures then the cluster will be particularly stable. The group theoretical consequences of the Tensor Surface Harmonic Theory are developed in Chapter 4 for[ML₂]_n, [ML₄]_n and [ML₅]_n clusters where either the xz and yz or x²-y² and xy components to L^π_d and L^δ_d do not contribute equally to the bonding. The closed shell requirements for such clusters are defined and the orbital symmetry constraints pertaining to the interconversion of conformers of these clusters are described. In Chapter 5 Stone's Tensor Surface Harmonic methodology is applied to high nuclearity transition metal carbonyl cluster compounds with 13-44 metal atoms. Two limiting bonding situations are identified and represented in terms of general electron counting rules. If the radial bonding effects predominate the clusters are characterised by 12n_s+Δ_i valence electrons, where Δ_i is the characteristic electron count of the interstitial moiety. If radial and tangential bonding effects are important then the total number of valence electrons is 12n_s+2(s_s+s_i-l), where s_s and s_i are the number of skeletal bonding molecular orbitals associated with surface (s_s) and interstitial (s_i) moieties. Chapter 6 develops a new theoretical framework to account for the bonding in the high nuclearity ligated clusters with columnar topologies. The wave functions of columnar metal clusters can be expressed as an expansion based on the particle on the cylinder problem. This bonding analysis is applied to clusters containing columns of triangles and squares. In Chapter 7 the origin of non-bonding orbitals in molecular compounds is reviewed and analysed using general quantum mechanical considerations. A combination of the pairing theorem and a group theoretical analysis leads to a definition of the number of the non-bonding molecular orbitals in co-ordination, polyene and cluster compounds. The non-bonding molecular orbitals have been generated by defining the nodal characteristics of the relevant orbitals and evaluating the solutions under the appropriate boundary conditions. The stereochemical role of nonbonding molecular orbitals in co-ordination compounds is also discussed.

No description available.

The synthesis and characterization of pyridinyl &alpha / -diimine Pd(II) complexes having a functionalized hydrocarbon attached to the imino nitrogen was performed. The catalytic activity of these complexes were then evaluated in the polymerization of ethylene and in the Heck coupling reaction of methyl acrylate with iodobenzene.<br /> <br /> Unconjugated &beta / -diimine complexes of palladium were also synthesized and their activities towards ethylene polymerization and the Heck coupling of methyl acrylate and iodobenzene also evaluated and compared to that of the &alpha / -diimine complexes. Three of the &alpha / -diimine complexes synthesized showed activity towards ethylene polymerization, these being the complexes bearing the allyl, styrene and phenol functionalities. &omega / -Carboxylato complexes which were also synthesized showed no activity towards ethylene polymerization.<br /> <br /> The polymer produced was found to be high density linear polyethylene with an average PDI of 2.54 with Mn values ranging between 3.42 and 6.90 x 10-5 and Mw values ranging between 6.05 and 17.6 x 10-5.<br /> <br /> The complexes bearing the allyl, styrene and phenol functionalities, as well as the &omega / -carboxylato complexes active in the Heck coupling reactions of methyl acrylate with iodobenzene. None of the unconjugated &beta / -diimine complexes prepared showed any activity towards ethylene polymerization even at high Al/Pd ratios. The activity of these complexes towards the Heck arylation reaction was comparable to that of the &alpha / -diimine complexes showing similar activities.

This thesis is based on two main parts. The first part concerns purification and functionalization of carbon nanotubes (papers I-III), and the second part is related to the synthesis of organometallic fullerene derivatives (papers IV-VII): Two oxidative methods involving aqueous nitric acid were compared with respect to their capability to introduce carboxylic groups into single walled carbon nanotubes, and several literature methods for esterification and amidation of these groups have been evaluated with focus on efficiency and reproducibility in forming covalently functionalized products soluble in organic media. Amidation proceeding via a SWNT-(COCl)n intermediate yielded the expected covalent product, whereas carboxylate salt formation dominated with other attempted methods. Esterification was achieved via the acyl chloride method and via alkylation of SWNT-(COO–)n, the latter being the more efficient method. A new, reagent-free method for purification of single- and multi walled carbon nanotubes has been developed. Microwave treatment dissociates non-nanotube carbon and disperses it into an organic solvent, resulting in very pure carbon nanotubes within a few minutes of heating, without the involvement of acidic/oxidative reagents. According to thermogravimetric analysis, Raman and IR spectroscopy, as well as SEM, the process yields nanotubes with a low degree of defects. A non-covalent approach has been employed to prepare nanotubes functionalized with glycosides. Derivatives of galactose and lactose were covalently linked to a pyrene moiety and the thus formed pyrene-glycosides were non-covalently attached to single- and multi walled carbon nanotubes by π-π interactions. Fluorescence titrations have been used to quantify the formed supramolecular assemblies, which for SWNTs exhibits increased water solubility. A fulleropyrrolidine-(tricarbonyl)chromium complex was synthesized and fully characterized. IR spectroelectrochemistry was used to probe the redox state of the fullerene and provided evidence for electronic communication between the two electroacive moieties. A C60-ferrocene-C60 triad system was synthesized and characterized. Cyclic voltammetry and fluorescence studies suggested electronic communication between ferrocene and the two fullerenes. Finally, the synthesis and initial characterization of short fullerene-ferrocene oligomers are presented.

Thermolysis of Cp*W(NO)(CH₂CMe₃)₂ (2.1) in halo, methoxy, or phenylethynyl-substituted benzenes leads to the formation of the alkylidene intermediateCp*W(NO)(=CHCMe₃) which selectively activates ortho C-H bonds of the organicsubstrates. The ortho-regioselectivity diminishes as the size of the substituent increasesfrom F (97 %) to C-=CPh (51 %). In the solid-state structure of all complexes the ortho-substituent is not coordinated to the metal centre; rather, the metal centre is engaged inagostic interactions with a neopentyl methylene C-H bond. Mechanistic studies on the chlorobenzene reaction reveal that the ortho-C-H-activation product is preferentially formed via thermal isomerization from the meta / para-C-H-activation isomers. Reactions between Cp*W(NO)(CH₂EMe₃)Cl (E = C or Si) and a variety of bis(allyl)magnesium reagents lead to the expected formation of Cp*W(NO)(alkyl)(allyl)complexes. Cp*W(N0)(CH₂CMe₃)(η³-CH₂CHCH₂) (3.5), Cp*W(N0)(CH₂CMe₃)(η³-CH₂CMeCH₂) (3.6), Cp*W(N0)(CH₂CMe₃)(η³-CH₂CHCHMe) (3.7),Cp*W(N0)(CH₂CMe₃)(η³-CH₂CHCHPh) (3.8) and Cp*W(N0)(CH₂SiMe₃)(η³-CH₂CHCHMe) (3.9) have thus been synthesized in moderate yields. The solid-state molecular structures of 3.5 and 3.7-3.9 feature a σ-π distorted ally! ligand in the endoconformation. Complex 3.5 reacts with pyrrolidine at RT to form Cp*W(NO)(NC₄H8)(CHMeCH₂NC₄H8) (3.10), a nucleophilic-attack product. Complexes 3.6-3.9 effect the concurrent N-H and α-C-H activation of pyrrolidine at RT and form alkyl-amido complexes analogous to the previously known Cp*W(N0)(CH₂EMe)(NC₄H₇-2-CMe₂CH=CH₂) (3.12). Thermolysis of Cp*W(N0)(CH₂CMe₃)(η³-CH₂CHCHMe) (3.7) at RT leads to the loss of neopentane and the formation of the η²-diene intermediate Cp*W(N0)(η²-CH₂=CHCH=CH₂) (A) which has been isolated as a PMe₃ adduct. In the presence of saturated organic substrates, C-H activation occurs exclusively at the methyl positions of the molecule. Reactions between intermediate A and unsaturated substrates lead to coupling between the coordinated η²-diene and the unsaturation on the organic molecule.Treatment of Cp*W(N0)(n-C₅H₁₁)(η³-CH₂CHCHMe) (4.1) with I₂ at -60 °C produces n-C₅H₁₁ I in moderate yields. Thermolysis of Cp*W(N0)(CH₂CMe₃)(η³-CH₂CHCHPh) (3.8) in benzene at 75 °C for one day leads to the exclusive formation of Cp*W(N0)(H)(η³-PhCHCHCHPh) (5.1).Trapping, labelling, and monitoring experiments suggest that 5.1 is formed via 1) the loss of neopentane and the generation of the allene intermediate Cp*W(N0)(η²-CH₂=C=CHPh), 2) the C-H activation of benzene resulting in a phenyl phenylallyl complex, and 3) the thermal isomerization of this latter species to 5.1.

No description available.

Thesis (M.S.)--Wake Forest University. Dept. of Chemistry, 2007. / Vita. Includes bibliographical references.

Thesis (M.S.)--University of Toledo, 2007. / Typescript. "Submitted as partial fulfillment of the requirements for the Master of Science Degree in Chemistry." "A thesis entitled"--at head of title. Bibliography: leaves 99-101.