LIDAR data taken over the Elkhorn Slough in Central California are analyzed for terrain. The specific terrain element of interest is vegetation, and in particular, tree type. Data taken on April 12th, 2005, were taken over a 10 km x 20 km region which is mixed use agriculture and wetlands. Time return and intensity were obtained at ~2.5 m postings. Multi-spectral imagery from QuickBird was used from a 2002 imaging pass to guide analysis. Ground truth was combined with the orthorectified satellite imagery to determine regions of interest for areas with Eucalyptus, Scrub Oak, Live Oak, and Monterey Cyprus trees. LIDAR temporal returns could be used to distinguish regions with trees from cultivated and bare soil areas. Some tree types could be distinguished on the basis of the relationship between first/last extracted feature returns. The otherwise similar Eucalyptus and Monterey Cyprus could be distinguished by means of the intensity information from the imaging LIDAR. The combined intensity and temporal data allowed accurate distinction between the tree types, and task not otherwise practical with the satellite spectral imagery.

Thesis (M.S.)--University of Hawaii at Manoa, 2005. / Includes bibliographical references (leaves 182-185). / xi, 185 leaves, bound ill. 29 cm

Thesis (M.S. in Astronautical Engineering)--Naval Postgraduate School, September 2008. / Thesis Advisor(s): Agrawal, Brij N. ; Boger, Dan C. "September 2008." Description based on title screen as viewed on November 3, 2008. Includes bibliographical references (p. 79-80). Also available in print.

The hardware and software for a computer controlled optical radar, or lidar, system are described. The system builds on a previously installed pulsed ruby backscatter lidar, capable of acquiring data at controlled azimuth and elevation angles through the atmosphere. The described system replaces hardwired logic with computer control. Two coupled computers are used to allow a degree of real time control while data are processed. One of these computers reads and controls mount elevation angle, reads the laser energy monitor, and senses firing of the laser. The other computer serves as a user interface, and receives the lidar return data from a digitizer and memory, and the angle and energy information from the other computer. The second computer also outputs data to a disc drive. The software provided with the system is described, and the feasibility of additional software for both control and data processing is explored. Particular attention is given to data integrity and instrument and computer operation in the presence of the high energy pulses used to drive the laser. A previously described laser energy monitor has been improved to isolate it from laser transients. Mount elevation angles are monitored with an absolute angle readout. As a troubleshooting aid, a simulator with an output that approximates the lidar receiver output was developed. Its output is digitally generated and provides a known repetitive signal. Operating procedures are described for standard data acquisition, and troubleshooting is outlined. The system can be used by a relatively inexperienced operator; English sentences are displayed on the system console CRT terminal to lead the operator through data acquisition once the system hardware is turned on. A brief synopsis of data acquired on the system is given. Those data are used as the basis of other referenced papers. It constitutes soundings for over one hundred days. One high point has been operation of the system in conjunction with a balloon borne atmospheric particulate sampling package. The system has also been used occasionally as the transmitter of a lidar system with physically separated receiver and transmitter.

No description available.

No description available.

No description available.

No description available.

Thesis (M.S.)--University of Delaware, 2007. / Principal faculty advisor: Michael A. O'Neal, Dept. of Geography. Includes bibliographical references.

Thesis (Ph.D.)-- University of Adelaide, Dept. of Physics, 1980. / Typescript (photocopy).