Computational modeling in the field of biomechanics is becoming increasingly popular and successful in practice for its ability to predict function and provide information that would otherwise be unobtainable. Through the application of these new and constantly improving methods, kinematics and joint contact characteristics in pathological conditions of femoroacetabular impingement (FAI) and total hip arthroplasty (THA) were studied using a lower extremity computational model. Patients presenting with FAI exhibit abnormal contact between the femoral neck and acetabular rim leading to surrounding tissue damage in daily use. THA is the replacement of both the proximal femur and acetabular region of the pelvis and is the most common surgical intervention for degenerative hip disorders. A combination of rigid osteoarticular anatomy and force vectors representing soft tissue structures were used in developing this model. Kinematics produced by healthy models were formally validated with experimental data from Burnfield et al. This healthy model was then modified to emulate the desired morphology of FAI and a THA procedure with a range of combined version (CV) angles. All soft tissue structures were maintained constant for each subsequent model. Data gathered from these models did not provide any significant differences between the kinematics of healthy and FAI but did show a large amount of variation in all THA kinematics including incidents of dislocation with cases of lower CV angles. With the results of these computational studies performed with this model, an increased understanding of hip morphology with regards to STS has been achieved.

Reverse shoulder arthroplasty (RSA) is performed to decrease pain and improve function and range of motion (ROM) primarily for patients with rotator cuff arthropathy, an arthritis of the shoulder secondary to rotator cuff insufficiency. However, RSA has suffered from high early to mid-term rates of complication, with instability being one of the most common. The shoulder biomechanics post-RSA depend on multiple factors such as implant geometry, positioning, and cuff integrity. This study built upon prior finite element (FE) analysis of RSA to investigate the effects of glenoid lateralization and retentive liner design on shoulder stability. A previously validated FE model was extended to model shoulder external rotation (ER) after implantation of the Zimmer Trabecular Metal RSA system. The FE model included the scapula bone with an implanted glenosphere implant, the humerus bone with implanted humeral sections of the RSA implant, and muscle tendons representing the subscapularis, infraspinatus, and deltoid. Six different models matched glenospheres in three cases of lateralization (2mm, 4mm, and 10mm) with two humeral poly liner designs (normal: 150° neck shaft angle or retentive: 155° neck shaft angle). Using Abaqus/Explicit FE software, the proximal ends of the soft tissues were pulled to their anatomical positions, and then fixed in space while the humerus was externally rotated 80° about the humeral long axis from a neutral position with the shoulder abducted 25°. The displacements, deltoid and subscapularis forces, impingement-free ROMs, and subluxation gap distances were recorded. Although greater glenosphere lateralization was associated with higher impingement-free ROM, larger deltoid and subscapularis forces developed. Deltoid tension contributes to shoulder stability and control, but elevated amounts of deltoid tension may contribute to scapular fractures and greater stress at impingement sites post-RSA. Further analysis such as inclusion of more anatomical features and additional motions may offer greater insight to orthopedic surgeons when planning for RSA insertion.

Reverse shoulder arthroplasty (RSA) is a common treatment for individuals with arthritis of the glenohumeral joint in the presence of a massive rotator cuff tear. Though this procedure has been effective in restoring function to these individuals, it has also been associated with high early to mid-term complications, such as scapular notching and instability. A finite element (FE) modeling approach has previously been used to study the range of motion an individual with RSA could adduct their arm the polyethylene liner impinged on the inferior scapular bone and the contact stress at the impingement site. This model was then validated in a physical experiment using cadaveric tissue. In this document, I introduce modifications to that FE model to further study instability and scapular notching risk. First, modern RSA implant geometries were introduced into the model, and the effect of polyethylene liner rotation and glenoid version on impingement-free range of motion and instability risk was assessed. Then, a physical material property characterization of rotator cuff tissues present after RSA was performed. Finally, those material properties and continuum elements representative of the rotator cuff tendons were introduced into the FE model. Throughout all of these studies, greater complexity and fidelity was added to improve the ability to model both contact at the impingement site and potential dislocation events through more accurate loadings and boundary conditions.