Quantum optics offers a huge variety of exciting phenomena. Many of them are still in their infancy and especially when it comes to implementing devices using these effects for more than a proof of principle demonstration still many things have to be investigated and understood. In this thesis I discuss the role of correlations in some areas of quantum optics and in some cases compare it to classical optics. Four papers form the core of the thesis. In the first paper, I propose a new measure for entanglement. This measure is based on correlations between two states. I show, how this measure relates to another measure, the concurrence. It turns out that the measure is a bijective map of the concurrence for a pure state of two qubits. I motivate why the new measure is useful if one wants to implement it experimentally. I discuss its behaviour for the case of two qubits and show its properties when dealing with pure and with mixed states. The second paper extends the result of the first one to the case where one has higher-dimensional states than qubits. In the third paper I look at phase super-resolution. I show that it can be interpreted as a purely classical effect and I analyse what is needed and what is not needed to achieve it. Specifically, I show that quantum correlations in terms of entanglement is not needed to demonstrate phase super-resolution. By doing so I propose how one could achieve arbitrarily high phase super-resolution. Finally, the last paper looks at the efficiency of quantum lithography and quantum imaging. It shows, that some basic assumptions in the original proposals of quantum lithography seems unfounded and that, as a consequence, the efficiency is poor. I give formulæ for the explicit scaling behaviour when changing the number of photons in a mode or when changing the number of pixels. The effect of the results on the future of quantum lithography is discussed as well. / Kvantoptiken erbjuder ett stort antal spännande fenomen. Många av dem är fortfarande i sin linda och särskilt när man vill tillämpa kvantoptiska effekter snarare än att bara visa att principen fungerar så finns det många saker och ting som måste förstås och undersökas bättre. I denna avhandling ska jag diskutera vilken roll korrelationer spelar i några områden inom kvantoptik och i några fall ska jag jämföra dem med klassisk optik. Fyra vetenskapliga artiklar bildar kärnan i avhandlingen. I det första pappret föreslår jag ett nytt sammanflätningsmått. Detta mått har sin ursprung i korrelationer mellan två tillstånd. Jag visar hur måttet förhåller sig till ett annat mått, den så kallade "concurrence". Det visar sig att måttet är en bijektiv avbildning av concurrence för rena tillstånd av två qubitar. Jag motiverar varför det nya måttet är användbart när man vill implementera det experimentellt. Jag diskuterar hur måttet beter sig för två qubitar och visar dess egenskaper för rena och blandade tillstånd. Det andra pappret utvidgar första papprets resultat till situationer där man har tillstånd med högre dimension än qubitar. I det tredje pappret undersöker jag superfasupplösning. Jag visar att man kan tolka detta som en rent klassisk effekt och jag undersöker vad man behöver och vad man inte behöver för att uppnå superfasupplösning. Jag visar särskilt att kvantkorrelationer genom sammanflätning inte behövs för att visa superfasupplösning. Därigenom ger jag förslag om hur man kan uppnå godtyckligt hög superfasupplösning. Slutligen tittar jag i sista pappret på effektiviteten av kvantlitografi och kvantavbildning. Pappret visar att några grundläggande antaganden i originalförslaget till kvantlitografi verkar vara illa underbyggda och att därigenom kvantlitografins effektivitet reduceras kraftigt. Jag ger ekvationer för det exakta skalningsbeteendet när man ändrar antalet fotoner i en mod eller när man ändrar antalet pixlar. Jag diskuterar också implikationerna som det medför för kvantlitografins framtid. / QC 20110524

<p>The phenomenon of spontaneous growth of metallic filaments, known as whisker growth has been studied. Until now the problem that Sn whisker growth could cause in electronics by making shorts has been partially prohibited as Pb and Sn have been used together in solders and coating. Regulations restricting Pb use in electronics has made the need to understand Sn whisker growth more current.</p><p>It is shown that whiskers are highly resilient towards vibrations and shocks. A Sn whisker is shown to withstand 55 mA.</p><p>Results show that reflowing of the Sn plated surface does not prevent extensive whisker growth. Results show that intermetallic compound growth can not be the sole reason behind whisker growth. Nickel and silver underlayer have been shown not to prevent whisker growth, but perhaps restrain whisker growth. Heat treatment damped whisker growth considerably. It is judged that base material CuSn6 is less prone to show whisker growth than CuSn0.15 and E-Cu58.</p>

<p>This study is concerned with the negative effects of wearing corrective lenses while using eye trackers, and the correction of those negative effects. The eye tracker technology studied is the video based real-time Pupil Center and Corneal Reflection method. With a user study, the wearing of eyeglasses is shown to cause 20 % greater errors in the accuracy of an eye tracker than when not wearing glasses. The error is shown to depend on where on the eye tracker viewing area the user is looking.</p><p>A model for ray refraction when wearing glasses was developed. Measurements on distortions on the image of the eye caused by eyeglass lenses were carried out. The distortions were analyzed with eye tracking software to determine their impact on the image-to-world coordinates mapping. A typical dependence of 1 mm relative distance change on cornea to 9 degrees of visual field was found.</p><p>The developed mathematical/physiological model for eyeglasses focuses on artifacts not possible to accommodate for with existing calibration methods, primarily varying combinations of viewing angles and head rotations. The main unknown in the presented model is the effective strength of the glasses. Automatic identification is discussed. The model presented here is general in nature and needs to be developed further in order to be a part of a specific application.</p><p> </p>

This study is concerned with the negative effects of wearing corrective lenses while using eye trackers, and the correction of those negative effects. The eye tracker technology studied is the video based real-time Pupil Center and Corneal Reflection method. With a user study, the wearing of eyeglasses is shown to cause 20 % greater errors in the accuracy of an eye tracker than when not wearing glasses. The error is shown to depend on where on the eye tracker viewing area the user is looking. A model for ray refraction when wearing glasses was developed. Measurements on distortions on the image of the eye caused by eyeglass lenses were carried out. The distortions were analyzed with eye tracking software to determine their impact on the image-to-world coordinates mapping. A typical dependence of 1 mm relative distance change on cornea to 9 degrees of visual field was found. The developed mathematical/physiological model for eyeglasses focuses on artifacts not possible to accommodate for with existing calibration methods, primarily varying combinations of viewing angles and head rotations. The main unknown in the presented model is the effective strength of the glasses. Automatic identification is discussed. The model presented here is general in nature and needs to be developed further in order to be a part of a specific application.

The phenomenon of spontaneous growth of metallic filaments, known as whisker growth has been studied. Until now the problem that Sn whisker growth could cause in electronics by making shorts has been partially prohibited as Pb and Sn have been used together in solders and coating. Regulations restricting Pb use in electronics has made the need to understand Sn whisker growth more current. It is shown that whiskers are highly resilient towards vibrations and shocks. A Sn whisker is shown to withstand 55 mA. Results show that reflowing of the Sn plated surface does not prevent extensive whisker growth. Results show that intermetallic compound growth can not be the sole reason behind whisker growth. Nickel and silver underlayer have been shown not to prevent whisker growth, but perhaps restrain whisker growth. Heat treatment damped whisker growth considerably. It is judged that base material CuSn6 is less prone to show whisker growth than CuSn0.15 and E-Cu58.

<p>The option of communicating via SMS messages can be considered available in all GSM networks. It therefore constitutes a almost universally available method for mobile communication.</p><p>The Tiger XS, a device for secure communication manufactured by Sectra, is equipped with an encrypted text message transmission system. As the text message service of this device is becoming increasingly popular and as options to connect the Tiger XS to computers or to a keyboard are being researched, the text message service is in need of upgrade.</p><p>This thesis proposes amendments to the existing protocol structure. It thoroughly examines a number of options for source coding of small text messages and makes recommendations as to implementation of such features. It also suggests security enhancements and introduces a novel form of stegangraphy.</p>

<p>At the University Hospital of Umeå, NUS, a new radiation treatment department is being built. The purpose of this master thesis is to evaluate the actual radiation protection outside three out of five treatment rooms in the building, including two Varian and one Siemens accelerator, and to verify that the radiation limits for the staff and the general public, stated by the Swedish Radiation Safety Authority, are obeyed.</p><p>The evaluation of the radiation protection shielding is made through measurements. The nominal photon beam energies 6 and 15 MV (dose rates up to 500 MU/min) can be used, which means that both photons and neutrons will contribute to the effective dose. For the photon measurements, two different GM counters have been used and for the neutron measurements a Neutron detector with a polyethylene moderator and a ³He recoil proton counter tube was applied. The thesis also includes a literature study of the photon and neutron energy spectra outside the treatment rooms in order to check that the measurement equipments are suitable to use.</p><p>The measured doses of the radiation shielding are below the radiation limits per week and year but the measurements indicate too high values per hour, i.e. momentary dose rate, at the height of isocenter of the primary walls and at the gap under the door for all three accelerators. The rooms with the Varian accelerators also show too high values per hour at the secondary wall where the door is attached. However, the limiting value per hour is only a recommendation and no extra reinforcement in therefore required. Nevertheless, one should avoid placing a workplace, for example a writing desk, close to the secondary and primary walls.</p>

<p>In Lembang, a farming community on western Java, family-sized, plug-flow, polyethylene biogas systems fed with cow dung, are being used as an integrated solution to issues related to energy, agriculture and waste management. Through simple, on-farm research and observation, a number of key problems have been addressed and improvements made to the design. Due to the large supply of cow dung in the area, and the potential to spread the benefits of the technology beyond the homes of dairy farmers, the feasibility of developing a communal, polyethylene biogas system for several households, has been investigated. Experiments on small model-digesters were combined with observations of full-scale biogas systems in use. Measurement equipment and techniques were constructed and developed, in order to measure biogas production and other relevant process parameters. Results indicate that a communal system can be an appropriate choice, but only under a certain set of circumstances.</p>

At the University Hospital of Umeå, NUS, a new radiation treatment department is being built. The purpose of this master thesis is to evaluate the actual radiation protection outside three out of five treatment rooms in the building, including two Varian and one Siemens accelerator, and to verify that the radiation limits for the staff and the general public, stated by the Swedish Radiation Safety Authority, are obeyed. The evaluation of the radiation protection shielding is made through measurements. The nominal photon beam energies 6 and 15 MV (dose rates up to 500 MU/min) can be used, which means that both photons and neutrons will contribute to the effective dose. For the photon measurements, two different GM counters have been used and for the neutron measurements a Neutron detector with a polyethylene moderator and a 3He recoil proton counter tube was applied. The thesis also includes a literature study of the photon and neutron energy spectra outside the treatment rooms in order to check that the measurement equipments are suitable to use. The measured doses of the radiation shielding are below the radiation limits per week and year but the measurements indicate too high values per hour, i.e. momentary dose rate, at the height of isocenter of the primary walls and at the gap under the door for all three accelerators. The rooms with the Varian accelerators also show too high values per hour at the secondary wall where the door is attached. However, the limiting value per hour is only a recommendation and no extra reinforcement in therefore required. Nevertheless, one should avoid placing a workplace, for example a writing desk, close to the secondary and primary walls.

This PhD thesis addresses the threat posed to society by sources that can produce high power electromagnetic pulses (HEPM) and be used maliciously to disturb or damage electronic equipment. The vulnerability from intentional electromagnetic interference (IEMI) has increased in the recent decades due to the widespread dependence of the civil society on sensitive electronic systems and proliferation of radiation sources. As the characteristics of the disturbances associated with IEMI often have very high frequency content, the existing mitigation measures and protection components may not be adequate. It was seen that for ultra wideband (UWB) transients low voltage protection components may not work as intended, due to parasitic components that arises from the packaging of the device. The large spatial distribution of many civilian facilities and critical infra-structures (e.g., power generation, communications, train system, etc.) presents many unexpected ports for an attacker as the majority of the parts of these systems are not protected or secure. As the new European Rail Traffic Management System (ERTMS) will utilize wireless communication for communication and control of the trains the vulnerability from different radiating HPEM sources was investigated. Angles of incidence and frequencies that are a threat in a given situation are identified. Due to the possibility of unexpected ports, the propagation of differential mode ultra wideband transients in low voltage power networks, when injected into a power socket of a facility, was studied. The effects on the transient propagation from cable bends, switches and junctions were studied, both in a laboratory setup and in the network of a facility. Also, as modern electronic equipment and systems may not be tested for waveforms and disturbances other than standardized EMC tests, experiments on some common commercial-off-the-shelf (COTS) equipment were performed with non-standard test situation. It was seen that these could easily be disturbed or even permanently damaged. In addition, due to the inherent difficulties with IEMI, a new method for classifying facilities from IEMI is suggested. It is based on available terminology of accessibility (A), susceptibility (S) and consequence (C), but expands these and forms the so called IEMI/ASC-cube.