31 |
Desenvolvimento de um ressoador retangular de fenda com m?ltiplas camadas de substrato e com utiliza??o de material PBG para sistema de comunica??o sem fioAndrade, Humberto Dion?sio de 02 September 2013 (has links)
Made available in DSpace on 2014-12-17T14:55:12Z (GMT). No. of bitstreams: 1
HumbertoDA_TESE.pdf: 4762435 bytes, checksum: 20aae983d6895db90a85b0e2b107200f (MD5)
Previous issue date: 2013-09-02 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / In the globalized world modern telecommunications have assumed key role within the company, causing a large increase in demand for the wireless technology of communication, which has been happening in recent years have greatly increased the number of applications using this technology. Due to this demand, new materials are developed to enable new control mechanisms and propagation of electromagnetic waves. The research to develop new technologies for wireless communication presents a multidisciplinary study that covers from the new geometries for passive antennas, active up to the development of materials for devices that improve the performance at the frequency range of operation.
Recently, planar antennas have attracted interest due to their characteristics and advantages when compared with other types of antennas.
In the area of mobile communications the need for antennas of this type has become increasingly used, due to intensive development, which needs to operate in multifrequency antennas and broadband. The microstrip antennas have narrow bandwidth due to the dielectric losses generated by irradiation. Another limitation is the degradation of the radiation pattern due to the generation of surface waves in the substrate. Some techniques have been developed to minimize this limitation of bandwidth, such as the study of type materials PBG - Photonic Band Gap, to form the dielectric material.
This work has as main objective the development project of a slot resonator with multiple layers and use the type PBG substrate, which carried out the optimization from the numerical analysis and then designed the device initially proposed for the band electromagnetic spectrum between 3-9 GHz, which basically includes the band S to X. Was used as the dielectric material RT/Duroid 5870 and RT/Duroid 6010.LM where both are laminated ceramic-filled PTFE dielectric constants 2.33 and 10.2, respectively. Through an experimental investigation was conducted an analysis of the simulated versus measured by observing the behavior of the radiation characteristics from the height variation of the dielectric multilayer substrates.
We also used the LTT method resonators structures rectangular slot with multiple layers of material photonic PBG in order to obtain the resonance frequency and the entire theory involving the electromagnetic parameters of the structure under consideration.
xviii
The analysis developed in this work was performed using the method LTT - Transverse Transmission Line, in the field of Fourier transform that uses a component propagating in the y direction (transverse to the real direction of propagation z), thus treating the general equations of the fields electric and magnetic and function. The PBG theory is applied to obtain the relative permittivity of the polarizations for the sep photonic composite substrates material.
The results are obtained with the commercial software Ansoft HFSS, used for accurate analysis of the electromagnetic behavior of the planar device under study through the Finite Element Method (FEM).
Numerical computational results are presented in graphical form in two and three dimensions, playing in the parameters of return loss, frequency of radiation and radiation diagram, radiation efficiency and surface current for the device under study, and have as substrates, photonic materials and had been simulated in an appropriate computational tool. With respect to the planar device design study are presented in the simulated and measured results that show good agreement with measurements made. These results are mainly in the identification of resonance modes and determining the characteristics of the designed device, such as resonant frequency, return loss and radiation pattern / No mundo globalizado moderno, as telecomunica??es assumiram um papel fundamental dentro das sociedades, provocando um grande aumento da demanda por tecnologia de comunica??o sem fio, isto vem acontecendo nos ?ltimos anos e tem aumentado bastante o n?mero de aplica??es que utilizam esta tecnologia. Em decorr?ncia dessa demanda, novos materiais s?o desenvolvidos no sentido de possibilitar novos mecanismos de controle e propaga??o de ondas eletromagn?ticas. A pesquisa para o desenvolvimento de novas tecnologias para comunica??o sem fios apresenta um car?ter multidisciplinar que abrange desde o estudo de novas geometrias para antenas passivas e ativas at? o de desenvolvimento de materiais para dispositivos que melhorem o desempenho naquela faixa de frequ?ncia de opera??o.
Recentemente as antenas planares tem despertado interesses devido as suas caracter?sticas e vantagens que oferecem quando comparadas com os demais tipos de antenas.
Na ?rea de comunica??es m?veis a necessidade de antenas desse tipo tem se tornado cada vez maior, devido ao seu intenso desenvolvimento, que necessita de antenas que operem em multifrequ?ncia e em banda larga. As antenas de microfita apresentam largura de banda estreita devido ?s perdas no diel?trico geradas pela irradia??o. Outra limita??o ? a degrada??o do diagrama de irradia??o devido ? gera??o de ondas de superf?cie no substrato. Algumas t?cnicas est?o sendo desenvolvidas para minimizar esta limita??o de banda, como ? o caso do estudo de materiais do tipo PBG Photonic Band Gap, para compor o material diel?trico.
Este trabalho tem como objetivo principal o desenvolvimento do projeto de um ressoador de fenda com m?ltiplas camadas e com a utiliza??o de substrato do tipo PBG, onde foi realizada a otimiza??o a partir da analise num?rica e em seguida, projetado o dispositivo proposto inicialmente para a faixa do espectro eletromagn?tico compreendida entre 3-9 GHz, que inclui basicamente a banda S at? X. Foi utilizado como material diel?trico o RT/Duroid 5870 e RT/Duroid 6010.2LM onde ambos s?o laminados cer?micos PTFE com constantes diel?tricas de 2.33 e 10.2, respectivamente. Atrav?s de uma investiga??o experimental foi realizada uma an?lise dos resultados simulados versus medidos observando o comportamento das
xvi
caracter?sticas de radia??o a partir da varia??o da altura das multicamadas de subtrato diel?trico.
Foi utilizado tamb?m o m?todo LTT ?s estruturas ressoadoras retangulares de fenda com m?ltiplas camadas, para a obten??o da freq??ncia de resson?ncia bem como toda a teoria que envolva os par?metros eletromagn?ticos da estrutura em estudo.
As an?lises desenvolvidas neste trabalho foram realizadas com utiliza??o do m?todo LTT Linha de Transmiss?o Transversa, no dom?nio da Transformada de Fourier que utiliza uma componente de propaga??o na dire??o y (transversa ? dire??o real de propaga??o z), tratando assim as equa??es gerais dos campos el?tricos e magn?ticos em fun??o de
yE
e
yH
. A teoria PBG ser? aplicada para a obten??o da permissividade relativa para as polariza??es s e p dos substratos compostos de material fot?nico.
Os resultados s?o obtidos com o software comercial Ansoft HFSS, usado para a an?lise precisa do comportamento eletromagn?tico do dispositivo planar em estudo, por meio do M?todo dos Elementos Finitos (FEM).
Resultados num?rico-computacionais s?o apresentados em forma de gr?fico em duas e tr?s dimens?es, para aos par?metros de perda de retorno, frequ?ncia de radia??o, e diagrama de radia??o, efici?ncia de radia??o e densidade superficial de corrente para o dispositivo em estudo, e que tem como substratos, materiais fot?nicos e que fora simulado em uma ferramenta computacional apropriada. . No que diz respeito ao projeto do dispositivo planar em estudo s?o apresentados os resultados medidos e os simulados que apresentam boa concord?ncia com as medi??es efetuadas. Estes resultados consistem principalmente na identifica??o dos modos de resson?ncia e na determina??o das caracter?sticas do dispositivo projetado, como freq??ncia de resson?ncia, perda de retorno e diagrama de radia??o
|
32 |
Modes and propagation in microstructured optical fibresIssa, Nader January 2005 (has links)
Microstructured optical fibres (MOFs), also commonly called photonic crystal fibres or holey fibres, describe a type of optical fibre in which continuous channels of (typically) air run their entire length. These `holes' serve to both confine electromagnetic waves within the core of the fibre and to tailor its transmission properties. In order to understand and quantify both of these functions, a new computational algorithm was developed and implemented. It solves for the eigenvalues of Maxwell's wave equations in the two-dimensional waveguide cross-section, with radiating boundary conditions imposed outside the microstructure. This yields the leaky modes supported by the fibre. The boundary conditions are achieved exactly using a novel refinement scheme called the Adjustable Boundary Condition (ABC) method. Two implementations are programmed and their computational efficiencies are compared. Both use an azimuthal Fourier decomposition, but radially, a finite difference scheme is shown to be more efficient than a basis function expansion. The properties of the ABC method are then predicted theoretically using an original approach. It shows that the method is highly efficient, robust, automated and generally applicable to any implementation or to other radiating problems. A theoretical framework for the properties of modes in MOFs is also presented. It includes the use of the Bloch-Floquet theorem to provide a simpler and more efficient way to exploit microstructure symmetry. A new, but brief study of the modal birefringence properties in straight and spun fibres is also included. The theoretical and numerical tools are then applied to the study of polymer MOFs. Three types of fibres are numerically studied, fabricated and characterised. Each is of contemporary interest. Firstly, fabrication of the first MOFs with uniformly oriented elliptical holes is presented. A high degree of hole ellipticity is achieved using a simple technique relying on hole deformation during fibre draw. Both form and stress-optic birefringence are characterized over a broad scaled-wavelength range, which shows excellent agreement with numerical modelling. Secondly, an analysis of leaky modes in real air core MOFs, fabricated specifically for photonic band gap guidance, is then used to identify alternative guiding mechanisms. The supported leaky modes exhibit properties closely matching a simple hollow waveguide, weakly influenced by the surrounding microstructure. The analysis gives a quantitative determination of the wavelength dependent confinement loss of these modes and illustrates a mechanism not photonic band gap in origin by which colouration can be observed in such fibres. Finally, highly multimode MOFs (also called `air-clad' fibres) that have much wider light acceptance angles than conventional fibres are studied. An original and accurate method is presented for determining the numerical aperture of such fibres using leaky modes. The dependence on length, wavelength and various microstructure dimensions are evaluated for the first time for a class of fibres. These results show excellent agreement with published measurements on similar fibres and verify that bridge thicknesses much smaller than the wavelength are required for exceptionally high numerical apertures. The influence of multiple layers of holes on the numerical aperture and capture efficiency are then presented. It shows that a substantial increase in both these parameters can be achieved for some bridge thicknesses. Simple heuristic expressions for these quantities are given, which are based on the physical insight provided by the full numerical models. The work is then supported by the first fabrication attempts of large-core polymer MOFs with thin supporting bridges. These fibres exhibit relatively high numerical apertures and show good agreement with theoretical expectations over a very wide scaled-wavelength range.
|
33 |
Modes and propagation in microstructured optical fibresIssa, Nader January 2005 (has links)
Microstructured optical fibres (MOFs), also commonly called photonic crystal fibres or holey fibres, describe a type of optical fibre in which continuous channels of (typically) air run their entire length. These `holes' serve to both confine electromagnetic waves within the core of the fibre and to tailor its transmission properties. In order to understand and quantify both of these functions, a new computational algorithm was developed and implemented. It solves for the eigenvalues of Maxwell's wave equations in the two-dimensional waveguide cross-section, with radiating boundary conditions imposed outside the microstructure. This yields the leaky modes supported by the fibre. The boundary conditions are achieved exactly using a novel refinement scheme called the Adjustable Boundary Condition (ABC) method. Two implementations are programmed and their computational efficiencies are compared. Both use an azimuthal Fourier decomposition, but radially, a finite difference scheme is shown to be more efficient than a basis function expansion. The properties of the ABC method are then predicted theoretically using an original approach. It shows that the method is highly efficient, robust, automated and generally applicable to any implementation or to other radiating problems. A theoretical framework for the properties of modes in MOFs is also presented. It includes the use of the Bloch-Floquet theorem to provide a simpler and more efficient way to exploit microstructure symmetry. A new, but brief study of the modal birefringence properties in straight and spun fibres is also included. The theoretical and numerical tools are then applied to the study of polymer MOFs. Three types of fibres are numerically studied, fabricated and characterised. Each is of contemporary interest. Firstly, fabrication of the first MOFs with uniformly oriented elliptical holes is presented. A high degree of hole ellipticity is achieved using a simple technique relying on hole deformation during fibre draw. Both form and stress-optic birefringence are characterized over a broad scaled-wavelength range, which shows excellent agreement with numerical modelling. Secondly, an analysis of leaky modes in real air core MOFs, fabricated specifically for photonic band gap guidance, is then used to identify alternative guiding mechanisms. The supported leaky modes exhibit properties closely matching a simple hollow waveguide, weakly influenced by the surrounding microstructure. The analysis gives a quantitative determination of the wavelength dependent confinement loss of these modes and illustrates a mechanism not photonic band gap in origin by which colouration can be observed in such fibres. Finally, highly multimode MOFs (also called `air-clad' fibres) that have much wider light acceptance angles than conventional fibres are studied. An original and accurate method is presented for determining the numerical aperture of such fibres using leaky modes. The dependence on length, wavelength and various microstructure dimensions are evaluated for the first time for a class of fibres. These results show excellent agreement with published measurements on similar fibres and verify that bridge thicknesses much smaller than the wavelength are required for exceptionally high numerical apertures. The influence of multiple layers of holes on the numerical aperture and capture efficiency are then presented. It shows that a substantial increase in both these parameters can be achieved for some bridge thicknesses. Simple heuristic expressions for these quantities are given, which are based on the physical insight provided by the full numerical models. The work is then supported by the first fabrication attempts of large-core polymer MOFs with thin supporting bridges. These fibres exhibit relatively high numerical apertures and show good agreement with theoretical expectations over a very wide scaled-wavelength range.
|
Page generated in 0.0167 seconds