31 |
Structural properties of multi-layered materialsLoader, Charlotte Bree January 2000 (has links)
No description available.
|
32 |
Fundamental studies of growth mechanisms in physical vapour deposition of aluminiumKnorr, Nicholas J. January 2000 (has links)
No description available.
|
33 |
Growth and Characterization of Ti-Si-N Hard CoatingsFlink, Axel January 2006 (has links)
Metastable (Ti,Si)N alloy and TiN/SiNx multilayer thin solid films as well as SiNx/TiN surfaces have been explored. Cubic Ti1-xSixN (0≤x≤0.14) films deposited onto cemented carbide (WC-Co) substrates by arc evaporation exhibited a competitive columnar growth mode where the structure transforms to a feather-like nanostructure with increasing Si content as revealed by x-ray diffraction and transmission electron microscopy. X-ray photoelectron spectroscopy revealed the presence of Ti-N and Si-N bonding, but no amorphous Si3N4. Band structure calculations showed that phase separation of NaClstructure Ti1-xSixN solid solution into cubic SiN and TiN phases is energetically favorable. The metastable microstructure, however, was maintained for the Ti0.86Si0.14N film annealed at 900°C, while recrystallization in the cubic state took place at 1100°C annealing during 2h. The Si content influenced the film hardness close to linearly, by combination of solid-solution hardening in the cubic state and defect hardening. For x=0 and x=0.14, nanoindentation gave a hardness of 29.9±3.4 GPa and 44.7±1.9 GPa, respectively. The hardness was retained during annealing at 900°C. Nanostructured materials, e.g., nanocomposites and nanolaminates, are defined by internal interfaces, of which the nature is still under debate. In this work two-phase model systems were explored by depositing SiNx/TiN nanolaminate films, including superlattices containing cubic SiNx, by dual target reactive magnetron sputtering. It is demonstrated that the interfacial phase of SiNx onto TiN(001) and TiN(111) can be crystalline, and even epitaxial with complex surface reconstructions. Using in situ structural analyses combined with ab initio calculations, it is found that SiNx layers grow epitaxially, giving rise to strong interfacial bonding, on both TiN(001) and TiN(111) surfaces. In addition, TiN overlayers grow epitaxially on SiNx/TiN(001) bilayers in nanolaminate structures. These results provide insight into the development of design rules for novel nanostructured materials. / Report code: LiU-TEK-LIC-2006:51.
|
34 |
Growth and Characterization of Ti-Si-N Hard CoatingsFlink, Axel January 2006 (has links)
<p>Metastable (Ti,Si)N alloy and TiN/SiNx multilayer thin solid films as well as SiNx/TiN surfaces have been explored. Cubic Ti1-xSixN (0≤x≤0.14) films deposited onto cemented carbide (WC-Co) substrates by arc evaporation exhibited a competitive columnar growth mode where the structure transforms to a feather-like nanostructure with increasing Si content as revealed by x-ray diffraction and transmission electron microscopy. X-ray photoelectron spectroscopy revealed the presence of Ti-N and Si-N bonding, but no amorphous Si3N4. Band structure calculations showed that phase separation of NaClstructure Ti1-xSixN solid solution into cubic SiN and TiN phases is energetically favorable. The metastable microstructure, however, was maintained for the Ti0.86Si0.14N film annealed at 900°C, while recrystallization in the cubic state took place at 1100°C annealing during 2h. The Si content influenced the film hardness close to linearly, by combination of solid-solution hardening in the cubic state and defect hardening. For x=0 and x=0.14, nanoindentation gave a hardness of 29.9±3.4 GPa and 44.7±1.9 GPa, respectively. The hardness was retained during annealing at 900°C.</p><p>Nanostructured materials, e.g., nanocomposites and nanolaminates, are defined by internal interfaces, of which the nature is still under debate. In this work two-phase model systems were explored by depositing SiNx/TiN nanolaminate films, including superlattices containing cubic SiNx, by dual target reactive magnetron sputtering. It is demonstrated that the interfacial phase of SiNx onto TiN(001) and TiN(111) can be crystalline, and even epitaxial with complex surface reconstructions. Using in situ structural analyses combined with ab initio calculations, it is found that SiNx layers grow epitaxially, giving rise to strong interfacial bonding, on both TiN(001) and TiN(111) surfaces. In addition, TiN overlayers grow epitaxially on SiNx/TiN(001) bilayers in nanolaminate structures. These results provide insight into the development of design rules for novel nanostructured materials.</p> / Report code: LiU-TEK-LIC-2006:51.
|
35 |
Preparation and characterization of an organic-based magnetCarlegrim, Elin January 2007 (has links)
In the growing field of spintronics there is a strong need for development of flexible lightweight semi-conducting magnets. Molecular organic-based magnets are attractive candidates since it is possible to tune their properties by organic chemistry, making them so-called “designer magnets”. Vanadium tetracyanoethylene, V(TCNE)x, is particularly interesting since it is a semiconductor with Curie temperature above room temperature (TC~400 K). The main problem with these organic-based magnets is that they are extremely air sensitive. This thesis reports on the frontier electronic structure of the V(TCNE)x by characterization with photoelectron spectroscopy (PES) and near edge x-ray absorption fine structure (NEXAFS) spectroscopy. It also presents a new and more flexible preparation method of this class of organic-based thin film magnets. The result shows improved air stability of the V(TCNE)x prepared with this method as compared to V(TCNE)x prepared by hitherto used methods.
|
36 |
Design Of Reflective & / Antireflective Coatings For Space ApplicationsEroglu, Huseyin Cuneyt 01 September 2009 (has links) (PDF)
In order to improve the efficiency of various optical surfaces, optical coatings are used. Optical coating is a process of depositing a thin layer of a material on an optical component such as mirror or lens to change reflectance or transmittance.
There are two main types of coatings namely / reflective and antireflective (AR) Coatings. Reflective and antireflective coatings have long been developed for a variety of applications in all aspects of use / for optical and electro-optical systems in telecommunications, medicine, military products and space applications. In this thesis, the main properties of reflective and antireflective coatings, the thin film deposition techniques, suitable coating materials for space applications, space environment effects on coating materials and coating design examples which are developed using MATLAB for space applications will be discussed.
|
37 |
The Design And Production Of Interference Edge Filters With Plasma Ion Assisted Deposition Technique For A Space CameraBarutcu, Burcu 01 August 2012 (has links) (PDF)
Interference filters are multilayer thin film devices. They use interference effects between
the incident and reflected radiation waves at each layer interface to select wavelengths. The
production of interference filters depend on the precise deposition of thin material layers on
substrates which have suitable optical properties. In this thesis, the main target is to design
and produce two optical filters (short-pass filter and long-pass filter) for the CCDs that will
be used in the electronics of a space camera. By means of these filters, it is possible to take
image in different bands (RGB and NIR) by identical two CCDs. The filters will be fabricated
by plasma ion-assisted deposition technique.
|
38 |
Piezoelectric thin films and nanowires: synthesis and characterizationXiang, Shu 20 June 2011 (has links)
Piezoelectric materials are widely used for sensors, actuators and trasducers.
Traditionally, piezoelectric applications are dominated by multicomponent oxide
ferroelectrics such as lead zirconate titanate (PZT), which have the advantage of high piezoelectric coefficients. Recently, one-dimensional piezoelectric nanostructures such as nanowires of zinc oxide (ZnO) and gallium nitride (GaN) has gained a lot of attention due to their combined piezoelectric and semiconducting properties. The focus of this thesis is to study the processing and electric properties of such piezoelectric thin films and nanostructures for various applications.
There is an increasing interest to form thin films of multicomponent ferroelectric oxides such as PZT on three-dimensional structures for charge storage and MEMS applications. Traditional vapor phase deposition techniques of PZT offer poor conformality over threedimensional surfaces due to their reactant transport mechanisms. As an alternative, solgel synthesis may provide new process possibilities to overcome this hurdle but the film quality is usually inferior, and the yield data was usually reported for small device areas. The first part of this study is dedicated to the characterization of the electric properties and yield of PZT thin film derived from the sol-gel process. PZT thin films with good electric property and high yield over a large area have been fabricated. La doping was found to double the breakdown field due to donor doping effect. LaNiO3 thin films that can be coated on a three-dimensional surface have been synthesized by an all-nitrate based sol-gel route, and the feasibility to form a conformal coating over a three-dimensional surface by solution coating techniques has been demonstrated.
ZnO and GaN micro/nanowires are promising piezoelectric materials for energy harvesting and piezotronic device applications. The second part of this study is focused on the growth of ZnO and GaN micro/nanowires by physical vapor deposition techniques. The morphology and chemical compositions are revealed by electron microscopy. Utilizing the as-grown ZnO nanowires, single nanowire based photocell has been fabricated, and its performance was studied in terms of its response time, repeatability, excitation position and polarization dependence upon He-Cd UV-laser
illumination. The excitation position dependence was attributed to the competition of two opposite photo- and thermoelectric currents originated from the two junctions. The excitation polarization dependence was attributed to the difference in optical properties due to crystallographic anisotropy. Employing the as-grown GaN nanowires, single nanowire based strain sensor is demonstrated, and its behavior is discussed in terms of the effect of strain-induced piezopotential on the Schottky barrier height.
|
39 |
Preparation and characterization of an organic-based magnetCarlegrim, Elin January 2007 (has links)
<p>In the growing field of spintronics there is a strong need for development of flexible lightweight semi-conducting magnets. Molecular organic-based magnets are attractive candidates since it is possible to tune their properties by organic chemistry, making them so-called “designer magnets”. Vanadium tetracyanoethylene, V(TCNE)<sub>x</sub>, is particularly interesting since it is a semiconductor with Curie temperature above room temperature (T<sub>C</sub>~400 K). The main problem with these organic-based magnets is that they are extremely air sensitive. This thesis reports on the frontier electronic structure of the V(TCNE)<sub>x</sub> by characterization with photoelectron spectroscopy (PES) and near edge x-ray absorption fine structure (NEXAFS) spectroscopy. It also presents a new and more flexible preparation method of this class of organic-based thin film magnets. The result shows improved air stability of the V(TCNE)<sub>x</sub> prepared with this method as compared to V(TCNE)<sub>x</sub> prepared by hitherto used methods.</p>
|
40 |
The growth and infrared response of YBaâ†2Cuâ†3Oâ†7â†-â†#delta# thin filmsFarnan, Gareth A. January 2000 (has links)
No description available.
|
Page generated in 0.0456 seconds