The objektive of my thesis was to project the cycling trail in the vicinity of the town Slavonice.The cycling trail was projected around the village Maříž, which is the part of the town.The town Slavonice is located in Southern Bohemia, in region Jindřichův Hradec. At first, they were proposed two alternative. One of which was choise and her partial section was worked in the rang, which is submited for notification of constructions road, according to Decree 104/1997 Sb. Especially I went up from technical standards TP 179 - The Design of the cycle-way. I proposed a direction solution, vertical solution, constructional ordering and traffic signs. I situated in the proposed cycling trail picnick points, completed for notice board and bikes stand. In the framework of low possession relationships I wrote up lands, which can be touched of build-up the cycling trail. I have also done analyse existing cycling trails in surroundings. I refered in my thesis to diference between cycling trail and cyclo route too.

The aim of this thesis was to draw up a draft layout of large three-floor single-family house in the village Příkosice. In this work, I proposed two alternative solutions of which I worked up one to the desired stage. Architectural and functional solution to the variant of the house correspond to modern requirements for living. This building is located at a specific site in the built-up area of Příkosice. In the work, basic legislative conditions for the design documentation and construction of the building are presented. There is a brief description of the construction materials and the reasons for its use. Drawing part was processed using Microstation.

The master’s thesis is aimed at creation of project documentation used in power engineering, specifically the creation of schemes in the field of secondary technology. It deals with the basics of marking used by distribution system operators in the Czech Republic, the levels of documentation necessary for the construction or reconstruction of the electrical equipment itself. The aim of this master’s thesis is to design the switchboard with two design solutions using two different types of software. Used software will be Autocad LT as a representative of the CAD system and Ruplan EVU as CAE software. Based on the experience gained in designing and pre-defined aspects, at the end of thesis determine software that is more suited to designing.

The principal purpose of master´s thesis is draft of new library building and elaboration project documentation of construction section to the realization solved new building of library, which fills its proposed function and also offers the elementar technical requirements for buildings definite in valid written law.

This diploma work is dealing with the design of a multifunctional complex. These are two buildings on plot number 8618 on cat. the territory of the city of Trnava. The technical background of the buildings and hygiene background for employees are designed in the buildings. Vertical support structures are from ceramic blocks. Horizontal support structures are designed as reinforced concrete monolithic. The construction is based on the foundation strips. The roofing of the buildings is performed by a single-coated area non-permitable roof

Diploma thesis deals with drafting the project documentation for building permit. In more detailed vision it is a reconstruction and modernization of the Šumava Forest lodge in forest district administration on a small pension solved at a particular site in Zdíkov, small village on edge of the Protected Landscape Area Šumava. Technical requirements for these buildings are recorded in the initial search. This initial search also describes items related to this topic. Each building in this area is associated with the environment of countryside and can significantly affect the appearance of the original buildings and living conditions. It is therefore considered that the proposed will serve purpose of place where is the building built or in another more attractive location. Everything is summarized in the SWOT analysis, which distinguishes strengths and weaknesses, opportunities and threats. For this evaluation is very important to know this specific area, which is characterized by three aspects, namely in cultural, natural and historical term.

The thesis focused on the project of house in three sizes, typical countryside, in the village Struhařov near Benešov. The content of the thesis is a literal research, in which I discuss the problém of projects for new houses, of building family houses at the end of 20th century, of the reconstruction of the buildingproces of the construction of the family house. The aim of the thesis is the elaboration of the selected tyoe of the family house till the declaration of the simple construction according to the law 499/2006Sb. The selected type must meet the architectural demands first of all, so thatit does not bother the overal look of the countryside, at the same time it must alsomeet the demands of modern architecture. At the end of the thesis there is an evaluation of the choise of the type of thefamily house, of the used materials and technologies.

This thesis deals with the content of documentation for building permit, required for build a family farm with space for family living and accommodation. The aim is to design a project, that its content will meet the conditions for the granting of a building permit, according the Building Act and the relevant regulations and will respect the conditions of planning documentation with respect to architectural and structural design.

As a topic of my diploma work I have chosen solving of renovation and modernisation of block of flats in Prague 4 {--} Michle. It is block of flats built in thirties of twentieth century, it is situated in an attractive place in Prague 4, which is attractive so as for living as for commercial purpose recently. The aim of my diploma work was to work out proposal of project documentation for renovation and modernisation of block of flats in Prague 4 {--} Michle, in case of improving quality of living, minimizing of proposed costs for renovating and optimizing of functional and spatial use in case of maximum effective return of costs. Aim of the owner of the block of flats is maximizing effective of return costs, that is why the importance is on optimal disposition and minimal costs. Result of my diploma work is proposal of project documentation for renovation of block of flats in Prague 4 {--} Michle. This project documentation was worked out after choosing from options {\clqq}A`` and {\clqq}B``. By choosing was important minimal costs and maximizing of effective return costs. Because of saving personal data there are not mentioned identification data of the owner. During proposing of dispositional proposal, I focused on optimal spatial disposition and its functionality, another aim was choice of convenient materials and method of building, which are necessary for decreasing costs for renovating block of flats. I also had to respect trade. I believe that the owner will be satisfied after renovating with the results and with the return of costs. I tried to fulfil the aim of proposal of project documentation for renovation and modernisation of block of flats. At the end I can say, that projecting and building investment engineering is full of sense and creative work with future.

The aim of the thesis is the project of the process layout of the Motocentre in Ledenice. The project of the premises is elaborated in two versions from which one is chosen and finished to the documentation stage ready for releasing the building licence. Special attention is paid to the equipment, size of the areas needed and special demands during the manipulation with the vehicles in order to keep standard requirements and good accessibility. The construction is designed for a concrete lot in the village of Ledenice which is defined for industrial production by the territorial plan. In the thesis, are introduced all important requirements which are necessary to follow during designing; requirements for project documentation of the construction and individual acts preceding the works.