• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 3
  • 1
  • Tagged with
  • 4
  • 4
  • 4
  • 3
  • 3
  • 3
  • 3
  • 3
  • 3
  • 3
  • 3
  • 3
  • 3
  • 3
  • 3
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
1

Sludge from pulp and paper mills for biogas production : Strategies to improve energy performance in wastewater treatment and sludge management

Hagelqvist, Alina January 2013 (has links)
The production of pulp and paper is associated with the generation of large quantities of wastewater that has to be purified to avoid severe pollution of the environment. Wastewater purification in pulp and paper mills combines sedimentation, biological treatment, chemical precipitation, flotation and anaerobic treatment, and the specific combination of techniques is determined by the local conditions. Wastewater treatment generates large volumes of sludge that after dewatering can be incinerated and thus used for bio-energy production. Sludge is currently viewed as biofuel of poor quality due to its high water content, and some mills treat it solely as a disposal problem. Two strategies have been identified as feasible options to improve the energy efficiency of sludge management. One is drying using multi-effect evaporation followed by incineration. The other is anaerobic digestion of the wet sludge to produce methane. This thesis explores the energy balances of sludge management strategies in pulp and paper mills with special focus on anaerobic digestion. The first part consists of a system analysis, used to evaluate some wastewater treatment processes and sludge management, and the second part of empirical studies of anaerobic digestion of pulp and paper mill sludge. It was shown that the use of energy for aeration in aerobic biological treatment should be kept to the minimum required for acceptable quality of the processed water. Additional aeration for reduction of the generated sludge will only result in reduced energy generation in a subsequent methane generation stage. In the second part of the thesis, it is shown that anaerobic digestion is a feasible option for sludge management as it leads to production of high value biogas. Co-digestion with grass silage, cow/pig manure or municipal sewage sludge should then be used to counteract the low nitrogen content of pulp and paper mill sludge.
2

Caracterização de resíduos de indústria de papel para utilização como material geotécnico / Characterization of paper mill sludge for utilization as geotechnical material

Ibeiro, Lidiane da Silva January 2007 (has links)
Seguindo a linha de pesquisa de novos materiais geotécnicos, na busca por soluções técnicas a partir do uso de materiais alternativos, o presente estudo avaliou sob enfoque geotécnico o comportamento do resíduo de uma fábrica recicladora de papel localizada no estado do Rio Grande do Sul, Brasil. O objetivo do trabalho consistiu em caracterizar o resíduo e identificar suas propriedades no que se refere ao seu desempenho mecânico e hidráulico, a partir de um programa de ensaios de laboratório. O resíduo in natura possui uma umidade de 256 %, sendo composto de matéria orgânica (de 40 a 45 %), cargas minerais (principalmente caulinita e calcita) e água. As análises para a determinação dos parâmetros de deformabilidade, resistência e condutividade hidráulica foram feitas utilizando-se como variável os valores de umidade de aproximadamente 190, 160 e 130 %. Os parâmetros de compressibilidade unidimensional das amostras do resíduo não apresentaram variabilidade significativa com a variação da umidade de moldagem, obtendo-se valores médios elevados para os índices de compressão (Cc) e descarregamento (Cd) e para os coeficientes de adensamento (Cv), indicativos da alta compressibilidade característica do material. Para a determinação dos parâmetros de resistência do material foram realizados ensaios triaxiais nãodrenados. O ângulo de atrito interno obtido foi de ф’= 53,5°. Durante os ensaios triaxiais foram realizadas medições da condutividade hidráulica antes da fase de cisalhamento das amostras. Os coeficientes de condutividade hidráulica, medidos na fase pré-cisalhamento, atingiram valores da ordem de 10-9 m/s. A capacidade de atingir baixos valores de condutividade hidráulica é uma característica relevante do comportamento deste material e indica a possibilidade de ser utilizado como um material geotécnico alternativo em substituição aos materiais convencionais utilizados em coberturas impermeáveis de aterros (cover liners). / Following the line of research of new geotechnical materials, aiming new technical solutions using alternative materials, the present research evaluated, under geotechnical understanding, the behavior of the waste sludge from a paper recycling plant in Rio Grande do Sul, Brazil. The objective of this research aimed the characterization and the identification of the waste properties – mechanical and hydraulic performance, through laboratory tests. The natural waste has 256% of water content, and is composed by organic matter (ranging from 40 to 45 %), mineral charges (mainly Kaolinite and Calcite) and water. The tests for the determination of deformability, strength and hydraulic conductivity parameters were carried out under 190%, 160% and 130 % of water content. The one-dimensional compressibility parameters of the waste sludge did not show a significant variability with the variation of the molding water content, where the average values were high for the compression (Cc) and swelling (Cd) coefficients as well as for the consolidation coefficient (Cv), which can be considered as an indicative of high compressibility (characteristic of the material). For the determination of the strength parameters of the material, it was carried out undrained triaxial tests. The internal friction angle was ф’= 53,5°. During the triaxial tests, measurements of hydraulic conductivity were performed, previously shearing. The hydraulic conductivity coefficients measured during the pre-shearing phase, reached values around 10-9 m/s. The capacity for reaching low values of hydraulic conductivity is a considerable characteristic of the behavior of this material, what shows the possibility of its use as an alternative geotechnical material substituting the conventional materials used as cover liners
3

Caracterização de resíduos de indústria de papel para utilização como material geotécnico / Characterization of paper mill sludge for utilization as geotechnical material

Ibeiro, Lidiane da Silva January 2007 (has links)
Seguindo a linha de pesquisa de novos materiais geotécnicos, na busca por soluções técnicas a partir do uso de materiais alternativos, o presente estudo avaliou sob enfoque geotécnico o comportamento do resíduo de uma fábrica recicladora de papel localizada no estado do Rio Grande do Sul, Brasil. O objetivo do trabalho consistiu em caracterizar o resíduo e identificar suas propriedades no que se refere ao seu desempenho mecânico e hidráulico, a partir de um programa de ensaios de laboratório. O resíduo in natura possui uma umidade de 256 %, sendo composto de matéria orgânica (de 40 a 45 %), cargas minerais (principalmente caulinita e calcita) e água. As análises para a determinação dos parâmetros de deformabilidade, resistência e condutividade hidráulica foram feitas utilizando-se como variável os valores de umidade de aproximadamente 190, 160 e 130 %. Os parâmetros de compressibilidade unidimensional das amostras do resíduo não apresentaram variabilidade significativa com a variação da umidade de moldagem, obtendo-se valores médios elevados para os índices de compressão (Cc) e descarregamento (Cd) e para os coeficientes de adensamento (Cv), indicativos da alta compressibilidade característica do material. Para a determinação dos parâmetros de resistência do material foram realizados ensaios triaxiais nãodrenados. O ângulo de atrito interno obtido foi de ф’= 53,5°. Durante os ensaios triaxiais foram realizadas medições da condutividade hidráulica antes da fase de cisalhamento das amostras. Os coeficientes de condutividade hidráulica, medidos na fase pré-cisalhamento, atingiram valores da ordem de 10-9 m/s. A capacidade de atingir baixos valores de condutividade hidráulica é uma característica relevante do comportamento deste material e indica a possibilidade de ser utilizado como um material geotécnico alternativo em substituição aos materiais convencionais utilizados em coberturas impermeáveis de aterros (cover liners). / Following the line of research of new geotechnical materials, aiming new technical solutions using alternative materials, the present research evaluated, under geotechnical understanding, the behavior of the waste sludge from a paper recycling plant in Rio Grande do Sul, Brazil. The objective of this research aimed the characterization and the identification of the waste properties – mechanical and hydraulic performance, through laboratory tests. The natural waste has 256% of water content, and is composed by organic matter (ranging from 40 to 45 %), mineral charges (mainly Kaolinite and Calcite) and water. The tests for the determination of deformability, strength and hydraulic conductivity parameters were carried out under 190%, 160% and 130 % of water content. The one-dimensional compressibility parameters of the waste sludge did not show a significant variability with the variation of the molding water content, where the average values were high for the compression (Cc) and swelling (Cd) coefficients as well as for the consolidation coefficient (Cv), which can be considered as an indicative of high compressibility (characteristic of the material). For the determination of the strength parameters of the material, it was carried out undrained triaxial tests. The internal friction angle was ф’= 53,5°. During the triaxial tests, measurements of hydraulic conductivity were performed, previously shearing. The hydraulic conductivity coefficients measured during the pre-shearing phase, reached values around 10-9 m/s. The capacity for reaching low values of hydraulic conductivity is a considerable characteristic of the behavior of this material, what shows the possibility of its use as an alternative geotechnical material substituting the conventional materials used as cover liners
4

Caracterização de resíduos de indústria de papel para utilização como material geotécnico / Characterization of paper mill sludge for utilization as geotechnical material

Ibeiro, Lidiane da Silva January 2007 (has links)
Seguindo a linha de pesquisa de novos materiais geotécnicos, na busca por soluções técnicas a partir do uso de materiais alternativos, o presente estudo avaliou sob enfoque geotécnico o comportamento do resíduo de uma fábrica recicladora de papel localizada no estado do Rio Grande do Sul, Brasil. O objetivo do trabalho consistiu em caracterizar o resíduo e identificar suas propriedades no que se refere ao seu desempenho mecânico e hidráulico, a partir de um programa de ensaios de laboratório. O resíduo in natura possui uma umidade de 256 %, sendo composto de matéria orgânica (de 40 a 45 %), cargas minerais (principalmente caulinita e calcita) e água. As análises para a determinação dos parâmetros de deformabilidade, resistência e condutividade hidráulica foram feitas utilizando-se como variável os valores de umidade de aproximadamente 190, 160 e 130 %. Os parâmetros de compressibilidade unidimensional das amostras do resíduo não apresentaram variabilidade significativa com a variação da umidade de moldagem, obtendo-se valores médios elevados para os índices de compressão (Cc) e descarregamento (Cd) e para os coeficientes de adensamento (Cv), indicativos da alta compressibilidade característica do material. Para a determinação dos parâmetros de resistência do material foram realizados ensaios triaxiais nãodrenados. O ângulo de atrito interno obtido foi de ф’= 53,5°. Durante os ensaios triaxiais foram realizadas medições da condutividade hidráulica antes da fase de cisalhamento das amostras. Os coeficientes de condutividade hidráulica, medidos na fase pré-cisalhamento, atingiram valores da ordem de 10-9 m/s. A capacidade de atingir baixos valores de condutividade hidráulica é uma característica relevante do comportamento deste material e indica a possibilidade de ser utilizado como um material geotécnico alternativo em substituição aos materiais convencionais utilizados em coberturas impermeáveis de aterros (cover liners). / Following the line of research of new geotechnical materials, aiming new technical solutions using alternative materials, the present research evaluated, under geotechnical understanding, the behavior of the waste sludge from a paper recycling plant in Rio Grande do Sul, Brazil. The objective of this research aimed the characterization and the identification of the waste properties – mechanical and hydraulic performance, through laboratory tests. The natural waste has 256% of water content, and is composed by organic matter (ranging from 40 to 45 %), mineral charges (mainly Kaolinite and Calcite) and water. The tests for the determination of deformability, strength and hydraulic conductivity parameters were carried out under 190%, 160% and 130 % of water content. The one-dimensional compressibility parameters of the waste sludge did not show a significant variability with the variation of the molding water content, where the average values were high for the compression (Cc) and swelling (Cd) coefficients as well as for the consolidation coefficient (Cv), which can be considered as an indicative of high compressibility (characteristic of the material). For the determination of the strength parameters of the material, it was carried out undrained triaxial tests. The internal friction angle was ф’= 53,5°. During the triaxial tests, measurements of hydraulic conductivity were performed, previously shearing. The hydraulic conductivity coefficients measured during the pre-shearing phase, reached values around 10-9 m/s. The capacity for reaching low values of hydraulic conductivity is a considerable characteristic of the behavior of this material, what shows the possibility of its use as an alternative geotechnical material substituting the conventional materials used as cover liners

Page generated in 0.0339 seconds