This diploma thesis deals with design of office building with warehouse. The buildings are situated on slightly sloping terrain in cadastre unit of Sudoměřice u Tábora. Both buildings have rectangular shape and are connected with two sides. The Alemat s.r.o. company is internet shop, predominately with electronics. In the office building is also showroom where are some products will be shown. The warehouse will serve for receipt and issue of goods and to store them. The perimeter walls of office building is designed from ceramic block thickness of 250mm, for example Heluz Family 25. The walls will be insulated with 200mm of expanded polystyrene. The foundation construction is designed as foundation strips from plain concrete and permanent formwork brick filled with concrete and reinforced with steel. The ceiling construction is designed as prestressed panels thickness of 250mm. The roof is flat with main hydro isolation made of plasticized PVC foil loaded with pea gravel. The main construction of warehouse will be made of steel frames. The exterior skin of the warehouse will form panels Kingspan thickness of 140mm. The foundation construction is designed as monolithic foundation pads. Between the pads will be monolith grade beams. The roof is designed also from Kingspan panels. To the panel will be mechanically fastened plasticized PVC foil. Roof drainage is designed to rain gutters.

The project deals with building technological study of the new building apartment house in Brno. Dimensions of the apartment building are 29.2 m x 57.2 m with shape of a rectangle. The apartment house is designed terraced in five floors as a brick structure of the ceramic blocks. Ceilings and construction in contact with the ground is reinforced concrete. In groundfloor are located garages, other floors are designed as residential. The project deals with technological processes of bottom building, time and financial demands of construction.

This thesis deals with the project planning and management of the construction of two houses of flats in Brno – Bystrc, Šemberova street. The houses of flats are designed as a newly built five floors above ground and one basement floor. The supporting system is made from brick ceramic blocks, underground floor is made of concrete blocks. This thesis processes technological project of building as preparation and building site equipment, use of machines necessary for implementation of the construction, monitoring and test plan, technological steps for basement walls of shuttering blocks. Finally, in this thesis dealt with time and cost of construction of houses of flats.

The object of this master’s thesis is a newly-built mixed-use building in the town of Uherské Hradiště. It includes parking and office spaces, retail shops, and a coffee shop. The building is situated in a mildly sloping terrain near the town centre. It is a three-storey detached building with partial basement. The floor plan was created by joining several different-sized rectangles together. The mixed-use building is based on foundation pads and slabs. It is roofed with a warm flat roof and, above the first floor, with a green roof. The building consists of a cast-in-place reinforced concrete frame with columns and beams. The floor structure is composed of prestressed hollow core slabs. The external wall of the above-ground floors is made of hollow clay blocks and the basement external wall is made of permanent formwork. The wall of the lift shaft is built from reinforced concrete and the staircase is composed of precast reinforced concrete slabs. The external walls are insulated with contact thermal insulation system and in some parts there is timber cladding – ventilated façade with thermal insulation from glass wool. The thermal insulation of the basement and of the plinth is made of extruded polystyrene. The object is divided into several functional zones. On the ground floor there is a coffee shop, a copy shop, a stationery shop, and a bakery. On the first and second floors there are office spaces. In the basement there are technical facilities only. The main entrance of the object is from the northwest part of the plot. There the entrance to the car park is also located, situated to the northwest and southwest side of the plot. Bicycle stands and a place for recycling is also located there. Around the object there is a pavement from which there is wheelchair access to all of the functional zones.