This thesis deals with the investigations on the nonlinear electrical and manganetotransport properties of polycrystalline multi-phase ceramic composites of Zno/pervoskite manganite. Multifunctional properties are studied such as the enhanced low-field magnetoresistance(LFMR). magnetically tuneable low-voltage nonlinear current-voltage (I-V) characteristics with larger nonlinearity coefficients suitable for semiconducting and magnetoelectric devices. A brief introduction on the structure-property correlations, electronic and magnetic structures, nonlinear electrical conduction, phase separation, grain size and grain boundary effects on transport properties of manganites are presented. The nonlinear current-voltage characteristics of ZnO based varistors are also summarized. The thesis describes the synthesis of the ceramics and the methodology of different techniques utilized in characterizing the samples. The phase conversions in calcium manganite with changing Ca/Mn ratios as well as the oxygen non-stoichiometry and their influence on electrical transport properties were studied. The realization of low-voltage varistors prepared from ZnO+ CaMnO3 ceramic composites was described. An energy band model consisting of n-p-n heterojunctions of n-ZnO1-γ:Mn/p-CMZO/n-ZnO1 γ:Mn has been proposed in order to explain the large nonlinearity coefficients obtained at low field-strengths of 1.8 to 12 V/mm. The detailed investigationos on the structural identification and physico-chemical analyses of Ca4Mn7Zn3O21-δ(CMZO) phases having the beta-alumina or magnetoplumbite-type structures were carried out. The thesis also embodies the magnetically tuneable nonlinear I-V characteristics and the magnetotransport properties of ZnO/La(Sr)MnO3 and ZnO/La(Ca,Sr)MnO3 ceramic composites. The present investigations demonstrate that the ferromagnetic insulating (FMI) La06 Sr04Mn1-yZnyO3(y = 3 to 8 at.%) when present as minor phase in ZnO1- γ:Mn ceramics enables in attaining magnetically tunealbe nonlinear I-V characteristics. Wherein, the dominant ZnO1- γ:Mn phase remains paramagnetic. The results also indicate that the prevalence of ferromagnetism in ZnO1-γ:Mn is not significant for realizing magnetically tuneable I-V curves. The controversial results related to the existence of ferromagnetism in ZnO(doped)leading to diluted magnetic semiconductors(DMS) have been investigated. Another novel aspect of the present work is the low-field magnetoresistive(LFMR) property of ZnO/La(Sr)MnO3 and ZnO/La(Ca.Sr)MnO3 ceramic composites which been explained on the basis of spin-polarised tunneling across the intergrain regions. The influence of Zn2+ as a diamagnetic substitutent in modifying the crystallographic phase content, electrical transport and magnetic properties of Lao6Sro4MnO3 were studied in detail. The results point towards the fact the large decrease of Tc and Ms at lower Zn contents(≤ 8 at.%)is due to the dominant role played by the excess oxygen vacancy (Vo) as an electron donor in p-type Lao6Sro4Mn1-yZnyO3-δ rather than the charge compensatively predictable values. The modifications of electronic and magnetotransport properties were carried out on Lao6Sro4MnO3 substituted with diamagnetic ions such as Mg2+ - Al3+ - Ti4+ - Nb5+ - Mo6+ or W6+ at Mn-sublattice. The TEM studies including HREM results point to the fact the large ΔT(= Tc-TM-1)is accountable in terms of charge conduction within the electronically heterogeneous phase mixtures of charge ordered insulating (CO1) bi-stripes prevailing within the charge disordered FMI phases.

From the time of the unexpected discovery of the insulating nature of NiO by Verwey half a century ago, Oxide materials have continued to occupy the centre stage of condensed matter physics. The recent discovery of high temperature superconductivity in doped cuprates has given a new impetus to the study of the strongly correlated electron systems. Besides, the occurrence of Colossal Magneto-Resistance (CMR) in doped rare earth manganite has also created renewed interest in these rather old systems. Understanding of the rich and complex phase diagram of these materials and their sensitivity to small perturbations e.g. external magnetic field of a few Tesla, temperature, change in isotope etc. are of great theoretical interest and also these materials have many potential technological applications. A common feature of all these oxide materials is that the transition metal ions have partially filled d-shells. Unlike s and p-electrons which gives rise to hybridized Bloch states, the d-electrons retain their atomic nature in a solid. This gives rise to strong Coulomb interaction among d-electrons which may be comparable or more than its kinetic energy. The strong correlation effects are evident from the experimental fact that the undoped parent compounds are insulators rather than metals as suggested by band theory, which favours a metallic state for systems with one electron per unit cell since this gives rise to partially filled bands (and hence a metallic state). These insulators termed Mott insulators, arise solely due to strong electron-electron correlations as compared to the band insulators which arise due to complete filling of one electron bands thereby giving rise to a gap (band gap)in the excitation spectra. The delicate competition between the kinetic energy and the Coulomb energy for d-electrons is broadly responsible for the wide variety of phenomena like Mott metal-insulator transition (MIT), magnetic transitions, charge ordering, orbital ordering, ferro/antiferroelectricity, and most interestingly the observation of high Tc superconductivity in doped cuprates. In this thesis we will restrict our interest to one such class of oxide materials, namely the doped rare earth manganites. In Chapter 1 we give a brief overview of the structure and basic interactions present in the doped manganites. Also, in the same Chapter we give a brief introduction to the phenomenology of manganites, particularly its phase diagram in the doping and temperature plane and various experimental features, e.g. the wide variety of phase transitions and phenomena particularly the observation of CMR, charge ordering and incipient meso-scale phase separations etc.. Then we briefly introduce a recently proposed microscopic model which is believed to be a minimal model which, for the first time, includes the three most important interactions present in the manganites namely the following -1)coupling of the orbitally degenerate eg electrons to local lattice distortions of Jahn-Teller type which gives rise to two species of electrons. The one denoted by by ℓ is associated with Jahn-Teller effects and hence is localized whereas the other denoted by b is an extended state and propagates through the lattice. 2) The strong Hund’s couplingof ℓ and b electrons to the t2g core spin and 3) the strong Coulomb correlation between the two species of electrons. Additionally, the model includes a new doping dependent ferromagnetic exchange between the t2g core spins which can arise from “virtual double exchange” mechanism which will be discussed in great detail in Chapter 1 . Finally, we give a brief account on Dynamical Mean Field Theory (DMFT) and Numerical Renormalization Group (NRG) as an impurity solver for the single impurity problem arising under single site DMFT approximation. In Chapter 2 we study the effect of inter-site ℓ - b hybridization on the ‘ℓ - b’ model. The single impurity problem arising under DMFT approximation has close connection with the Vigman-Finkelshtein (VF)model. Then we briefly introduce the VF model and bring out its close connection with the impurity problem. We consider both the particle-hole symmetric as well as the U → ∞ particle-hole asymmetric cases. We derive various spectral functions at T = 0K and discuss the nature of fixed points under various circumstances. We explicitly show that for the particle-hole symmetric case the Hamiltonian flows from X-ray edge singularity fixed point to Free Electron fixed point under Renormalization Group transformation. This is evident from the spectral properties of the model. We write down the effective Hamiltonian at the free electron fixed point. For the particle-hole asymmetric case the model flows from X-ray edge singularity fixed point to Free Electron/Strong Coupling fixed point with additional potential scattering terms. We write down the effective Hamiltonian at this fixed point and derive various leading order deviations. We found all of them to be irrelevant in nature also most interestingly the quasi-particles describing the under lying Fermi liquid state are found to be asymptotically non-interacting. We also calculate the Fermi liquid parameter, z, by analyzing the energy level structure of a non-interacting Hamiltonian with effective renormalized parameter. Also, we consider the case of ‘self consistent bath hybridization’ without ℓ - b hybridization for Bethe lattice with infinite coordination. Low energy qualitative features are found to be same but some of the high energy features get qualitatively modified. In Chapter 3 we discuss the transport properties of doped manganites in the insulating phases and also the Hall effect in the metallic phase. In the first part of this chapter we calculate the resistivity based on the ‘ℓ - b’model and try to fit it to the semiconducting form: ρ(T )= ρ0(T /T0)−nexp[Δ(T )/kBT ] and extract the “transport gap”, Δ(T ). This gap can be characterized in terms of the “spectral gap” which can be defined for the ℓ - b model. It is found that the transport gap in the paramagnetic phase can be characterized in terms of the near constant “spectral gap” in this phase whereas the same in the ferromagnetic phase can be characterized in terms of the zero temperature spectral gap. In the last part of this chapter we calculate the Hall resistivity (ρxy) of these materials in the metallic phase. Ρxy is found to be negative and linear in applied field -quite consistent with the experimental findings but this fails to explain the positive linear Hall resistivity at low temperatures and its crossover as a function of field and temperature. We then present a reasonable explanation for this discrepancy and support it by calculating the Hall density of states for a two band “toy model” involving inter species hybridization. In Chapter 4 we calculate the optical conductivity, σ(ω), in ℓ - b model. σ(ω) arises from two independent processes. One of the processes involves ‘b’ electrons only and termed as ‘b - b channel’ and this gives rise to a Drude peak in the low frequency region. another process termed as the ‘ℓ - b channel’ involves hopping of an ℓ-electron to a neighbouring empty site and transforms into a ‘b’like state. This process gives rise to a broad mid-infrared peak. The total conductivity is the sum of contributions from these two incoherent channels. Calculated σ(ω) for metallic systems shows lot of similarities with experimental observations particularly the temperature evolution of the mid-infrared peak and the spectral weight transfer between the two peaks. But for the insulating systems the calculated optical conductivity showed trends similar to more recent experimental observations on some insulating systems (x =0.125) but contradicts with earlier experimental observations on some other insulating system (x =0.1). Finally, in the concluding chapter, we summarize results from all the chapters and also sketch some possible future directions of investigations.

Transition metal compounds, especially the oxides, containing dn (0 ≤ n ≤ 10) electronic configuration, constitute the backbone of solid state/materials chemistry aimed at realization of novel materials properties of technological importance. Some of the significant materials properties of current interest are spin-polarized metallic ferromagnetism, negative thermal expansion, second harmonic nonlinear optical (NLO) susceptibility, fast ionic and mixed electronic/ionic conductivity for application in solid state batteries, and last but not the least, high-temperature superconductivity. Typical examples for each one of these properties could be found among transition metal oxides. Thus, alkaline-earth metal (A) substituted rare-earth (Ln) manganites, Lnı.xAxMnΟ3, are currently important examples for spin-polarized magnetotransport, ZrV2O7 and ZrW2O8 for negative thermal expansion coefficient, KTiOPO4 and LiNbO3 for second harmonic NLO susceptibility, (Li, La) TiO3 and LiMn2O4 for fast-ionic and mixed electronic/ionic conductivity respectively, and the whole host of cuprates typified by YBa2Cu3O7 for high Tc superconductivity. Solid state chemists constantly endeavour to obtain structure-property relations of solids so as to be able to design better materials towards desired properties. Synthesis coupled with characterization of structure and measurement of relevant properties is a common strategy that chemists adopt for this task. The work described in this thesis is based on such a broad-based chemists' approach towards understanding and realization of novel materials properties among the family of metal oxides. A search for metallic ferro/ferrimagnetism among the transition metal perovskite oxides, metallicity and possibility of superconductivity among transition-metal substituted cuprates and second order NLO susceptibility among metal oxides containing d° cations such as Ti(IV), V(V) and Nb(V) - constitute the main focus of the present thesis. New synthetic strategies that combine the conventional ceramic approach with the chemistry-based 'soft1 methods have been employed wherever possible to prepare the materials. The structures and electronic properties of the new materials have been probed by state-of-the art techniques that include powder X-ray diffraction (XRD) together with Rietveld refinement, electron diffraction, thermogravimetry, measurement of magnetic susceptibility (including magnetoresistance), Mossbauer spectroscopy and SHG response (towards 1064 nm laser radiation), besides conventional analytical techniques for determination of chemical compositions. Some of the highlights of the present thesis are: (i) synthesis of new mixed valent [Mn(III)/Mn(IV)] perovskite-type manganites, ALaMn2O6-y (A = K, Rb) and ALaBMn3O9_y (A = Na, K; B = Ca, Sr) that exhibit ferromagnetism and magnetoresistance; (ii) investigation of a variety of ferrimagnetic double-perovskites that include ALaMnRuO6 (A = Ca, Sr, Ba) and ALaFeVO6 (A = Ca, Sr) and A2FeReO6 (A = Ca, Sr, Ba) providing new insights into the occurrence of metallic and nonmetallic ferrimagnetic behaviour among this family of oxides; (iii) synthesis of new K2NiF4-type oxides, La2-2xSr2XCui.xMxO4 (M = Ti, Mn, Fe, Ru) and investigation of Cu-O-M interaction in two dimension and (iv) identification of the structural rnotif(s) that gives rise to efficient second order NLO optical (SHG) response among d° oxides containing Ti(IV), V(V), Nb(V) etc., and synthesis of a new SHG material, Ba2-xVOSi2O7 having the fresnoite structure. The thesis consists of five chapters and an appendix, describing the results of the investigations carried out by the candidate. A brief introduction to transition metaloxides, perovskite oxides in particular, is presented in Chapter 1. Attention is focused on the structure and properties of these materials. Chapter 2 describes the synthesis and investigation of two series of anion-deficient perovskite oxides, ALaMn2O6-y (A = K, Rb, Cs) and ALaBMn3O9_y (A = Na, K; B = Ca, Sr). ALaMn2O6-y (A = K, Rb, Cs) series of oxides adopt 2 ap x 2 ap superstructure for K and Rb phases and √2 av x √2 ap x 2 ap superstructure (ap = perovskite subcell) for the Cs phase. Among ALaBMn3O9-y phases, the A = Na members adopt a new kind of perovskite superstructure, ap x 3 ap, while the A = K phases do not reveal an obvious superstructure of the perovskite. All these oxides are ferromagnetic (Tc ~ 260-325 K) and metallic exhibiting a giant magnetoresistance behaviour similar to alkaline earth metal substituted lanthanum manganites, Lai_xAxMnO3. However, unlike the latter, the resistivity peak temperature Tp for all the anion-deficient manganites is significantly lower than Tc. In Chapter 3, we have investigated structure and electronic properties of double-perovskite oxides, A2FeReO6 (A = Ca, Sr and Ba). The A = Sr, Ba phases are cubic (Fm3m) and metallic, while the A = Ca phase is monoclinic (P2yn) and nonmetallic. All the three oxides are ferrimagnetic with Tcs 315-385 K as reported earlier. A = Sr, Ba phases show a negative magnetoresistance (MR) (10-25 % at 5 T), while the Ca member does not show an MR effect. 57Fe Mossbauer spectroscopy shows that iron is present in the high-spin Fe3+ (S = 5/2) state in Ca compound, while it occurs in an intermediate state between high-spin Fe2+ and Fe3+ in the Ba compound. Monoclinic distortion and high covalency of Ca-O bonds appear to freeze the oxidation states at Fe+3/Re5+ in Ca2FeRe O6, while the symmetric structure and ionic Ba-O bonds render the FeReO6 array highly covalent and Ba2FeReO6 metallic. Mossbauer data for Sr2FeReO6 shows that the valence state of iron in this compound is intermediate between that in Ba and Ca compounds. It is likely that Sr2FeReO6 which lies at the boundary between metallic and insulating states is metastable, phase-seperating into a percolating mixture of different electronic states at the microscopic level. In an effort to understand the occurrence of metallicity and ferrimagnetism among double perovskites, we have synthesized several new members : ALaMnFeO6 (A = Ca, Sr, Ba), ALaMnRuO6 (A = Ca, Sr, Ba) and ALaVFeO6 (A = Ca, Sr) (Chapter 3). Electron diffraction reveals an ordering of Mn and Ru in ALaMnRuO6 showing a doubling of the primitive cubic perovskite cell, while ALaVFeO6 do not show an ordering. ALaMnRuOs are ferrimagnetic (Tcs ~ 200-250 K) semiconductors, but ALaVFeO6 oxides do not show a long range magnetic ordering . The present work together with the previous work on double perovskites shows that only a very few of them exhibit both metallicity and ferrimagnetism, although several of them are ferrimagnetic. For example, among the series Ba2MReO6 (M = Mn, Fe, Co, Ni), only the M = Fe oxide is both metallic and ferrimagnetic, while M = Mn and Ni oxides are ferrimagnetic semiconductors. Similarly, A2CrMoO6 (A = Ca, Sr), A2CrRe06 (A = Ca, Sr), and ALaMnRuO6 (A = Ca, Sr, Ba) are all ferrimagnetic but not metallic. While ferrimagnetism of double perovskites arise from an antiferromagnetic coupling of B and B' spins through the B-O-B' bridges, the occurrence of metallicity seems to require precise matching of the energies of d-states of B and B' cations and a high covalency in the BB'O6 array that allows a facile electron-transfer between B and B', Bn++B’m+↔B(n+1)++B’(m-1)+ without an energy cost, just as occurs in ReO3 and other metallic ABO3 perovskites. In an effort to understand the Cu-O-M (M = Ti, Mn, Fe, Ru) electronic interaction in two dimension, we have investigated K2N1F4 oxides of the general formula La2-2xSr2XCui.xMxO4 (M = Ti, Mn, Fe or Ru). These investigations are described in Chapter 4. For M = Ti, only the x = 0.5 member could be prepared, while for M = Mn and Fe, the composition range is 0 < x < 1.0, and for M = Ru, the composition range is 0 < x ≤ 0.5. There is no evidence for ordering of Cu(II) and M(IV) in the x = 0.5 members. While the members of the M = Ti, Mn and Ru series are semiconducting/insulating, the members of the M = Fe series are metallic, showing a broad metal-semiconductor transition around 100 K for 0 < x ≤ 0.15 that is possibly related to a Cu(II)-O-Fe(IV) < > Cu(III)-O-Fe(III) valence degeneracy. Increasing the strontium content at the expense of lanthanum in La2-2xSr2XCui.xFexO4 for x ≤ 0.20 renders the samples metallic but not superconducting. In a search for inorganic oxide materials showing second order nonlinear optical (NLO) susceptibility, we have investigated several borates, silicates and phosphates containing /ram-connected MO6 octahedral chains or MO5 square-pyramids, where M = d°: Ti(IV), Nb(V) or Ta(V). Our investigations, which are described in Chapter 5, have identified two new NLO structures: batisite, Na2Ba(TiO)2Si4O12, containing trans-connectd TiO6 octahedral chains, and fresnoite, Ba2TiOSi2O7, containing square-pyramidal T1O5. Investigation of two other materials containing square-pyramidal TiO5, viz., Cs2TiOP2O7 and Na4Ti2Si8O22. 4H2O, revealed that isolated TiO5 square-pyramids alone do not cause a second harmonic generation (SHG) response; rather, the orientation of T1O5 units to produce -Ti-O-Ti-O- chains with alternating long and short Ti-0 distances in the fresnoite structure is most likely the origin of a strong SHG response in fresnoite. Indeed, we have been able to prepare a new fresnoite type oxide, Ba2.xVOSi2O7 (x ~ 0.5) that shows a strong SHG response, confirming this hypothesis. In the Appendix, we have described three synthetic strategies that enabled us to prepare magnetic and NLO materials. We have shown that the reaction CrO3 + 2 NH4X > CrO2 + 2 NH3 + H2O + X2 (X = Br, I), which occurs quantitatively at 120-150 °C, provides a convenient method for the synthesis of CrO2. Unlike conventional methods, the method described here does not require the use of high pressure for the synthesis of this technologically important material. For the synthesis of magnetic double perovskites, we have developed a method that involves reaction of basic alkali metal carbonates with the acidic oxides (e.g. Re2O7) first, followed by reaction of this precursor oxide with the required transition metal/transition metal oxide (e.g. Fe/Fe2O3). By this method we have successfully prepared single-phase perovskite oxides, A2FeReO6, ACrMoO6 and ALaFeVO6. We have prepared the new NLO material Ba2_xV0Si207 from Ba2VOSi2O7 by a soft chemical redox reaction involving the oxidation of V(IV) to V(V) using Br2 in CH3CN/CHCI3. Ba2V0Si207 + 1/2 Br2 > Bai.5V0Si207 + 1/2 BaBr2. The work presented in this thesis was carried out by the candidate as part of the Ph.D. training programme. He hopes that the studies reported here will constitute a worthwhile contribution to the solid state chemistry of transition metal oxides and related materials.

The group of materials with ABO3 type perovskite structure are very important due to their attractive electrical and magnetic properties for technological applications and have been studied in the form of single crystals, bulk polycrystalline materials and thin films. Recently, efforts have been made to synthesize and understand the growth of ABO3 type perovskite nanostructures because of their distinctive physical properties and potential applications in the nanodevices. The primary aim of the present thesis is to synthesize the perovskites at nano-scale, with zero-dimension (0D), and one-dimension (1D) configurations. Basic work was carried in terms of synthesis – structure – composition correlation. Due to the small nature of the synthesized materials, few attempts were done to examine the physical properties, but to a limited extant. Efforts were also done to emphasize the structural behavior of nano perovskite in comparison with their bulk counterparts. Chapter 1 provides a brief introduction to perovskite materials and nanostructures, their technological applications and the fundamental physics involved. A brief review of the perovskite nanostructures both from fundamental science and technological point of view is provided. Finally the specific objectives of the current research are outlined. Chapter 2 deals with the experimental studies carried out in this thesis. It describes the methods used for the synthesis, experimental set up and the basic operation principles of various structural and physical characterizations such as X-ray diffraction (XRD), thermal analysis, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM), compositional analysis (EDX), focused ion beam (FIB), electrical and magnetic studies of the materials prepared. Chapter 3 describes the fabrication of porous anodic aluminum oxide (AAO) templates with different pore size, basic steps for synthesis of nanotubes and the possible growth mechanism of nanotubes in the AAO template. In chapter 4, we report the synthesis of ferroelectric Ba1-xSrxTiO3 (x = 0.0, 0.3) nanoparticles (diameter range: 20-40nm) and Ba1-xSrxTiO3 (x = 0.0, 0.4) nanotubes with diameter about 200nm by the sol-gel method. The Ba1-xSrxTiO3 nanostructures so obtained were characterized by number of techniques, including FE-SEM, XRD, DTA/TGA, FTIR spectroscopy, TEM, HRTEM as well as EDX and SAED. Formation of Y-junctions and multi-branches in Ba1-xSrxTiO3 nanotubes were also observed. The wall of the nanotubes were found to be made of randomly oriented nanoparticles which were confirmed from the HRTEM image. The average thickness of the wall of the nanotubes was found around 15(±5) nm and nanoparticles consisting the wall were found to be in the range of 5-10nm. Diffused phase transition (cubic to tetragonal), shifted to lower temperature side and leaky ferroelectric P–E loops were observed in Ba1-xSrxTiO3 (x = 0.0) ceramic prepared from nanoparticles. Curie temperature was observed at 120oC in the BT nanotube array as confirmed by the dielectric study. The P–E loops of as-prepared Ba1-xSrxTiO3 (x = 0.0) nanotube array were also measured and the hysteresis clearly demonstrates the room temperature ferroelectricity in the as prepared nanotubes, indicating these nanotube array is potential media as ferroelectric information storage. In chapter 5, we report the synthesis of single crystalline nanoparticles and polycrystalline nanotubes of Pb0.76Ca0.24TiO3 (PCT24) by sol-gel processing and characterized by various techniques. The crystallinity and phase purity of the PCT24 nanoparticles and nanotubes were confirmed by the XRD and SAED pattern. Compositional homogeneity and their crystalline structure confirms the formation of the tetragonal perovskite phase. The wall of the nanotubes was found to be made of nanoparticles which were confirmed from the HRTEM analysis. The average thickness of the wall of the nanotubes was found around 20nm and nanoparticles consisting the wall were found to be in the range of 5-8nm. Formation of some single crystalline PCT24 nanorods was also observed as confirmed by SAED and HRTEM analysis. Formations of Y-junctions and multi-branches in this complex functional oxide were observed. Dielectric measurements shows the diffuse phase transition and frequency dependence of Tm (temperature at which real part of dielectric constant shows maxima) suggesting the relaxor type behavior in the PCT24 ceramic prepared from nanoparticles. Polarization study was carried out on PCT24 nanotube array, which shows the ferroelectric nature at room temperature. Chapter 6 reports the synthesis and studies of PbZrO3 (PZ) nanoparticles and PbZr1-xTixO3 for x = 0.0, 0.48 and 1.0 nanotubes. PZ nanoparticles were prepared by a novel sol-gel method based on diol-based solution. Initially, PZ was crystallized with some intermediate m-Z and t-Z phases at 400-550oC and start transforming to orthorhombic at around 600oC and then finally transformed into pure orthorhombic PZ phase at about 700oC. XRD and TEM confirmed the nanocrystalline nature of PZ particles. Curie temperature in the PZ ceramic prepared from PZ nanoparticles was observed around at 205oC, which is lower as compared to the bulk (233oC). P–E hysteresis loops of PZ ceramic prepared from nanoparticles were measured at different applied voltages and single ferroelectric loops of leaky nature were observed rather than antiferroelectrics. The lead zirconate nanoparticles produced may have potential applications as materials used in microelectronics and microelectromechanical systems. PbZr1-xTixO3 for x = 0.0 (PZ), 0.48 (PZT48) and 1 (PT) nanotubes were fabricated by sol-gel method within the closely packed porous alumina templates and characterized by various techniques. The crystallinity of the PZ, PZT48 and PT nanotubes were confirmed via XRD and SAED studies. EDX analysis demonstrated that stoichiometry was formed. Formation of Y-junctions in this complex functional oxide was also observed. The wall of the nanotubes was found to be made up of randomly oriented nanoparticles, which were confirmed by the HRTEM studies and also by a typical SEM image. The average thickness of the wall of the nanotubes was found to be around 10-20nm and nanoparticles consisting the wall was found to be in the range of 3 – 8nm. The Curie temperature was observed at 220oC in the PZ nanotube array. For the first time, PLD has been employed for the synthesis of lead zirconate nanotubes using AAO template. Well-registered arrays of these nanotubes could function as three dimensional (3D) device elements in miniaturized ferroelectric random access memory (FRAM). In chapter 7, we report the synthesis of single crystalline 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 (PMN-PT) nanoparticles. PMN-PT nanoparticles were developed by a novel sol-gel method based on diol route. After partial calcination at 450oC/1h, PMN-PT powder morphology started transforming from pyrochlore to perovskite phase. It is interesting to note that this partially crystallized PMN-PT powder was unstable under electron beam and generated freestanding lead nanoparticles after absorbing energy from a focused electron beam. PMN-PT powder annealed at 700°C was fully transformed to perovskite phase and was stable under electron beam. XRD calculations and TEM imaging confirmed the nanocrystalline nature of PMN-PT particles. Magnetic measurements on PMN-PT nanoparticles prepared at 650 and 750oC show room temperature ferromagnetic hysteresis, whereas the bulk or the agglomerated particles show diamagnetic behavior. With an increase of annealing temperature or the particle size the magnetic moment decreases. PMN-PT nanotubes with diameter about 200nm were fabricated successfully by the sol-gel method based on diol route within the closely packed porous nanochannel alumina templates. Phase purity and crystalline perovskite phase formation of PMN-PT nanotubes were confirmed by the XRD and SAED pattern. EDX analysis demonstrated that stoichiometry was formed within accepted limit. The wall of the nanotubes was found to be made of nanoparticles which were confirmed from the HRTEM analysis. The average thickness of the wall of the nanotube was found around 20 nm and nanoparticles consisting the wall were found to be in the range of 10-20 nm. Since electroceramic materials are following a similar trend to miniaturization as conventional semiconductors, the synthesis of nanosized oxidic building blocks is moving into the focus of scientific and technological interest. Ferroelectrics are promising class of materials for the fabrication of electronic devices, as they are already an integral part of modern nanotechnological operations. Chapter 8 deals with the synthesis and properties of BiFeO3 (BFO) nanoparticles and nanotubes. Single crystalline BFO nanoparticles of different size and polycrystalline BFO nanotubes were prepared by sol-gel method. As prepared nanostructures were characterized by various techniques such as XRD, TGA-DTA, FTIR, scanning electron microscope (SEM), transmission electron microscope (TEM), selected-area electron diffraction (SAED), high resolution TEM and energy-dispersive X-ray spectroscopy (EDX). The crystallinity and phase purity of the BFO nanoparticles and nanotubes were confirmed by the XRD, SAED pattern and HRTEM analysis. Compositional homogeneity and their crystalline structure confirms the formation of the rhombohedrally distorted perovskite phase. EDX analysis demonstrated that stoichiometric BiFeO3 was formed within accepted limit. The HRTEM analysis confirmed that wall of the BFO nanotubes was made of nanoparticles, which were randomly oriented in the wall. The average thickness of the wall of the nanotubes was found to be around 15 nm and nanoparticles consisting the wall were found to be in the range of 3-6nm. Formation of Y-junctions in this complex functional oxide was observed. Magnetic measurements show clearly the enhancement of ferromagnetism in BFO nanotubes and ferroelectric loops were also observed in these nanotubes, that indicates the multiferroic nature of these nanotubes. BFO nanostructures at a large scale might be important for many applications such as memory elements in nanoscale devices in future. Chapter 9 reports the synthesis of a series of crystalline La1-xCaxMnO3 (x = 0, 0.3, 0.5, 0.7) nanoparticles with average diameter about 20 nm by an improved sol-gel method. The crystallinity and phase formation of as prepared nanoparticles was confirmed via XRD, SAED and HRTEM studies. EDX analysis demonstrated that desired stoichiometric was formed. Magnetic characterization reveals that the PM-FM transitions (Tc) occurs around at 205, 235, 235 and 230 K for x = 0, 0.3, 0.5, 0.7, respectively. The strong irreversibility between zero field cooling (ZFC) and field cooling (FC) magnetization curves, a cusplike peak in ZFC curve and unusual shape of M versus H loop at T = 5 K gives strong support for surface spin glass behavior. The highly stable charge ordering state in bulk manganites is suppressed, while the ferromagnetism is enhanced in these nanoparticles (x = 0.5 and 0.7). La0.7Ca0.3MnO3 were fabricated by sol-gel method within the closely packed porous alumina templates. The wall of the nanotubes was found to be made up of randomly oriented nanoparticles (8-12nm) as confirmed by HRTEM studies. The strong irreversibility between ZFC and FC magnetization curves as well as a cusplike peak in ZFC curve gives strong support for surface spin glass behavior. Magnetization value as obtained from M-H loop was about 28.5% of expected value, suggesting the existence of a magnetic dead layer, which avoids the propagation of exchange interaction between magnetic grains. The PM-FM transition was observed at 235 K. Chapter 10 gives the summary and conclusions of the present study and also discusses the possible future work that could after more insights into the understanding of the perovskite nanostructures. Highlight of the present work (i) Successful growth of nanostructures in both particles and tube forms, and study of their structure – composition correlations. (ii) Present work could optimize the necessary chemistry to successfully grow nanoparticles and nanotubes of various perovskite compositions. (iii) Successful studies of physical properties of nanoparticles and nanotubes, ofcourse, to a limited extent. However the properties observed in the present nanostructures have a strong indication of nonlinear phenomena similar to their bulk counterparts. (iv) It was reported in the literature, the observation of ferromagnetic behavior in several nonmagnetic compositions at nano-scale. Surprisingly, similar ferroelectric behavior was noticed even in our perovskite complex oxides such as relaxors (PMN-PT). A clear interaction of magnetic spin and an electric dipole was evident in these oxides such as relaxors and also multiferroics at nano-scale (~10-20 nm). (v) In ferromagnetic compositions such as LCMO, a very interesting spin-glass type behavior was observed.