No description available.

No description available.

Several organic transformations are mediated by group(IV) metal alkoxides. The reactivity is based on the basic nature of alkoxide group, Lewis acidic nature of the group(IV) metals, insertion of unsaturated molecules into the M-OR bond and the reduction of M(OR)4 to low valent species. The thesis deals with insertion reactions and the reductive and metathetic coupling reactions mediated by group(IV) metal alkoxides. Titanium(IV) alkoxides and zirconium(IV) alkoxides promote insertion and metathesis of aryl isocyanates. It was observed that aryl isocyanates underwent double insertion in addition to mono insertion. At room temperature, head to tail double insertion is observed whereas at elevated temperatures, head to head double insertion occurred leading to metathesis. The reaction has also been extended to metathesis between heterocumulenes and heteroalkenes. Titanium and zirconium carry out these reactions with different efficiencies. The reasons for these differences have been sought through computational methods. New organic transformations promoted by group(IV) metal alkoxides that are reduced with Grignard reagents and silanes have been explored. Grignard reagents do show reactivity towards imines in the presence of group(IV) metal alkoxides. The reactions have been studied with stoichiometric and catalytic amounts of titanium(IV) isopropoxide and are shown to follow different pathways. Isotope labeling studies indicate that alkylated products formed in stoichiometric reactions arise due to metal-olefin intermediates. However in catalytic reactions, a metal-alkyl complex is responsible for alkylation. Titanium(IV) alkoxides when used in combination with silanes such as phenylsilane bring about the reductive coupling of imines. One of the interesting features is that this pinacol type coupling is diastereospecific.

The thesis entitled ‘Chemistry of molybdenum xanthate (MoO2[Et2NCS2]2): Applications in organic synthesis’ is presented in 4 chapters. Molybdenum (IV and VI) oxo-complexes are the subject of significant interest due to their functional and structural similarities with several molybdo-enzymes.1 Literature survey suggests that, molybdenum (VI as well as IV) xanthate2 1 resembles the active sites of various molybdo-enzymes. Therefore, in the present thesis, we are presenting our attempts directed towards exploiting molybdenum xanthate 1 in developing various useful methodologies. Figure 1: Molybdenum xanthate Chapter 1 discloses the utility of molybdenum xanthate (1) in catalytic, aerobic oxidation of organic azides and alcohols as presented in part A and B. Part A: A mild molybdenum xanthate catalyzed, chemoselective oxidation of benzylic azides to the corresponding aldehydes3 under aerobic condition is described. This oxidation turned out to be a general method and a variety of benzylic azides were oxidized to the corresponding aldehydes. This oxidation protocol tolerates a variety of functional groups including alcohols, esters, ketones, halides and olefins. More importantly, the oxidation of azides stops at corresponding aldehyde stage without further oxidation to the corresponding carboxylic acids. A few examples are presented in scheme 1. Part B: As our attempts to oxidize alcohols with molybdenum xanthate 1 were unsuccessful (Chapter 1, Part A), we have attempted supporting the reagent 1 and investigated its utility in the oxidation of alcohols. As a consequence, polyaniline supported molybdenum xanthate (MoO2[Et2NCS2]2) is designed and used in an aerobic and mild chemoselective oxidation of alcohols4 to the corresponding aldehydes and ketones. The scheme to use polyaniline as the support for molybdenum xanthate was derived from the fact that polyaniline is known to increase the redox activity of various metal complexes by coordinating to the metal centre.5 The present oxidation strategy tolerates a variety of functional groups such as olefin, ketones, sulfides, tertiary amines, propargyl group etc. This oxidation strategy also works very well for the oxidation of secondary benzylic alcohols. Interestingly, the supported catalyst can be filtered after the reaction and reused for further oxidation without loss of its activity. Some representative examples are presented in Scheme 2. Chapter 2 describes the chemoselective and efficient reduction of azides to the corresponding amines. In this chapter, we have shown that a catalytic amount of molybdenum xanthate (1, MoO2[S2CNEt2]2) with PhSiH3 is an effective catalyst for the reduction of azides to the corresponding amines.6 This reduction of azides by 1, was inspired by the reductive silylation of aldehydes through the activation of silanes.7 This reduction tolerates a variety of reducible functional groups such as olefin, aldehydes, ketones, esters, amides and ethers, acetals etc. This strategy was also extended to various aliphatic azides to synthesize amine and their N-Boc derivatives in good yields. Scheme 3 illustrates few examples. Chapter 3 discloses convenient methods for the synthesis of substituted thiourea derivatives as presented in part A and B. Part A: A convenient method for the synthesis of tri-substituted thiourea derivatives by the reaction of primary amines with molybdenum dialkyl dithiocarbamates is presented in Part A.8 Primary amines on reaction with molybdenum xanthate produce corresponding thioureas in moderate to good yields. Similar reactions with propargylamine and 2-aminoethanol produce cyclic thiaoxazolidine and oxazolidine derivatives respectively. This methodology has been successfully adopted for the synthesis of amino acids derived chiral thioureas. Some examples are presented in Scheme 4. Scheme 4: Molybdenum xanthate mediated synthesis of thioureas Part B: An efficient method for the synthesis of symmetrical and unsymmetrical substituted thiourea9 derivatives by simple condensation of amine and carbon disulfide in aqueous medium is extensively studied. Present method describes the involvement of amino dithiol moiety as an intermediate. Though this method is not successful with secondary amines and aryl amines, it works smoothly with aliphatic primary amines to afford various di- and tri-substituted thiourea derivatives. The present method is also useful in synthesizing various substituted 2-mercapto imidazole heterocycles in moderate yields. A few examples are seen in Scheme 5. Scheme 5: Synthesis of thiourea derivatives in aqueous medium Chapter 4 describes a chemoselective deprotection10 of terminal acetonides (isopropylidines) by using aqueous TBHP (70%). A variety of acetonide derivatives on reaction with aq. TBHP in water:t-BuOH (1:1) as solvent mixtures furnish the corresponding acetonide deprotected diol products in good yields. This unprecedented deprotection strategy, tolerates a variety of acid sensitive functional groups such as silyl ether, trityl, olefin, propargyl, methoxymethyl ether, N-Boc, lactones, esters etc. A few examples are documented in Scheme 6. Scheme 6: Chemoselective deprotection of acetonides (For structural formula pl see the pdf file)

New complex silicon-containing molecules were made by B(C6F5)3-catalyzed hydrosilation, dehydrocoupling, and dealkylative coupling reactions starting from Si-H reagents. The scope of reactions starting from disilane was expanded to include the formation of silicon-sulfur1, silicon-oxygen and silicon-alkyl side-chains. Reaction inhibition was found with some heteroatom substrates, such as phenols and imines, that strongly bound to B(C6F5)3, and was consistent with the proposed mechanism (Chapter 2). B(C6F5)3 was found to be selective for Si-H activation in reactions of disilane and no competing Si-Si bond cleavage side-reactions were observed. This result will guide future studies and application of B(C6F5)3-catalyzed reactions with polysilanes. A different type of selectivity, the competing B(C6F5)3-catalyzed over-reduction, is evaluated and discussed in Chapter 3. This over-reduction reaction was classified into two distinct cases: alkyl groups for which over-reduction reaction was dependent on the steric bulk of the alkyl group and benzylic groups for which over-reduction was dependent on having an alpha-aryl group. These reactions are consistent with the proposed Piers-Oestreich mechanism (see Chapter 3) and suggest the rate-determining step for over-reduction is the nucleophilic attack of the alkoxysilane (R -O-SiR3) to the R3Si•••H•••B(C6F5)3 complex. Benzylic side-chains were over-reduced regardless of the steric bulk of the aryl groups. Literature precedents suggest that benzyl over-reductions must undergo an alternative mechanism to the Piers-Oestreich mechanism. A number of mechanisms have been proposed in the literature and in Chapter 3, suggesting conventional heteroatom substrate borane or silane-borane complexation. Furthermore, over-reduction of benzylic sulfur containing side-chains was found and this reaction was exploited in the B(C6F5)3-catalyzed synthesis of unique silicon-sulfur silicon-containing products. These over-reduction reactions highlighted the role of the silane for over-reduction and the challenges associated with the post-polymerization modification of poly(phenylsilane). The advances in B(C6F5)3-catalyzed synthesis of small silane molecules suggested reaction conditions and gave spectroscopic benchmarks that were applied to the post polymerization modification of poly(phenylsilane) (Chapter 4). New X-modified poly(phenylsilane) derivatives with thiolato (sulfur), alkoxy/aryloxy (oxygen), amido (nitrogen) and alkyl(carbon) side-chains were prepared with 10-40% incorporation of the ‘X’ group into poly(phenylsilane). These new polysilanes were characterized by the following methods: 1H/13C/29Si NMR, IR, MALS-GPC, EA, and UV-vis absorption spectroscopy. Together, these characterization methods showed that the polysilane had not undergone Si-Si cleavage and thus demonstrated the utility of B(C6F5)3 for the selective activation of Si-H bonds. Thermal decomposition of X-modified poly(phenylsilane) derivatives and parent poly(phenylsilane) showed interesting redistribution pathways (Chapter 5). The thermal decomposition products of poly(phenylsilane) were identified: volatile monosilanes, a structurally complex not-yet-identified phenylsilicon-containing material generated at 500 °C, and a mixture of silicon carbide (SiC) and elemental carbon generated at 800 °C. The B(C6F5)3-catalyzed post-polymerization method (Chapter 4) was evaluated based on the substitution percentage for X-functionalized poly(phenylsilane) derivatives. Reactions of highly electron-donating substrates gave a low amount of X incorporation (10%, e.g. aryloxy side-chains derived from phenol). Aryloxy groups were alternatively introduced via demethanative coupling, which gave a polymer with a greater substitution percentage (25%). The overall impact of the H-to-X substitution reactions was gauged by UV-vis absorption spectra and desirable UV absorption properties would require the modified poly(phenylsilane) to have a high degree of substitution. / Graduate / 2017-09-02